Ahmed Haredy, Mechanical Construction manager

Ahmed Haredy

Mechanical Construction manager

Arabian MEP Contractor

Location
Egypt
Education
Bachelor's degree, Bachelor of Science in Mechanical Engineering
Experience
16 years, 3 months

Share My Profile

Block User


Work Experience

Total years of experience :16 years, 3 months

Mechanical Construction manager at Arabian MEP Contractor
  • Qatar - Doha
  • May 2011 to November 2020

1-Full Mechanical works for Lusail Rail Transit Metro Typical Stations (Mariena1, 2, 3 &Energy City Station) and Tunnel works -Lusail City, Qatar (JV Project-Abiantia Tempo)
• Project Value : 112 Million Qatari Riyal
2-Full Chilled water Piping works for HMC Project - Doha, Qatar
3-Full MEP works for (Low Rise Building) Commercial Bank - Le Boulevard at Al Sadd - Doha City, Qatar (Main Contactor JV Project)
• Project Value : 56 Million Qatari Riyal
4- Full MEP works for (High Rise Building) Abraj Quartier Gate Way Tower (AQ-01) - Entrance of the Pearl Qatar - Qatar
• Project Value : 81 Million Qatari Riyal
5-Mechanical Maintainer Works for Shoumoukh Twin Tower in Doha, Qatar

Duties & Responsibilities
• Co-ordinate and optimize the arrangement of daily activities tasked to the construction crews and external subcontractors to minimize lost productivity time.
• Supervises the work of the construction site to ensure qualities that constructed and installed are accordance with specification, approved drawing and method of statement.
• Review the supervision crew's procedures for quality checks, site inspections for and monitor processes to address all mechanical site related issues.
• Work with the Project Manager to establish key performance indicators (contractually, matrix…etc) for critical MEP parameters related to the project.
• Critically review the project document, drawing to all mechanical trade and checking is there any deviation or not.
• Enforce and promote site safety and project procedures and proper use of equipment Advise Owners on any recommendations for improvement to practices regarding health and safety, construction approach and quality control plans. Recommend measures to enhance improvement or efficiency opportunities that may arise.
• Determine and recommend labor force, materials, equipment requirements and Interface with our team of engineers and supervisors regarding site preparation and progress in order to take necessary action.
• Serve as the MEP expert in the PM team for all matters related to design, quality assurance and documentation of mechanical works.
• Conduct ongoing meetings (know how, talk about …etc) with field staff to remain informed of project work and facilitate resolution of presented or developing issues.
• Coordinate between MEP parties and Architectural, civil, structural and some time operation team, providing technical advice to solve the issues
• Monitor performance of contracts or negotiate revisions to contractual agreements with consultants, clients, suppliers, or subcontractors
• Completion of computer-based two week ahead /weekly and/or daily reports, project log and documentation files.
• Certify invoices submitted by sub-contractors and recommend for payment.
• Prepare comparison analysis study between bidders for tender
• Coordinate with the Project Manager, Sr.Construction Manager (onsite) to collate and analyze periodic reports to help understand project performance against MEP standards and drive remedial actions.

• Interpret and explain plans and contract terms to involved staff and contractors.
• Acquire a detailed understanding of contract documents (drawings and specifications), phasing plans, MEP systems interrelationships, construction sequencing, and project schedules to advise the project manager as necessary.
• Review drawing, material and equipment submittals to avoid revision and ensure that they are accordance the project and client specification.
• Assists in preparing the project work plan and time scheduling of project activities to achieve the desired timetable for completion of projects.
• Monitoring and archiving the site progress work and records for any changes and progress on construction site to achieve the project schedules.
• Resolve any site related issues in parallel reporting immediately to our manager related to any technical or any deviation related to work

Mechanical Engineer at VECTOR Electromechanical Contracting
  • Qatar - Doha
  • April 2009 to April 2011

Projects:
1-Full Mechanical works for LeMirage - Amari Hotel - Doha City, Qatar (EPC Project)
• Project Value :42 Million Qatari Riyal
2-Full Mechanical works for Muraikh Tower - Doha City, Qatar
• Project Value :26 Million Qatari Riyal
3-Infrastructure and mechanical systems for ABM Militry Collage - Qatar
• Project Value :63 Million Qatari Riyal
4- Full Mechanical works for Apartment Building- LeMirage - Doha, Qatar
• Project Value :8.7 Million Qatari Riyal

Duties and Responsibilities
• Starting the project from the Initial stage of the WBS till reaching the SMART Deliverable.
• Study the tender circular drawing/bulletins/clarification responses from client with reflect the same to Estimation, procurement department to get the offers as per final and revised info from client.
• Review of technical project specifications and schedules of PVL related to mechanical disciplines.
• Critically review mechanical design work done by others to make important RFI that relevant service/design decisions as per standards to ensure that the objectives of the consultant /client is achieved.
• Review submittals done by engineering department before submissions to clients
• Undertake detailed mechanical engineering building services design and cross check the results using hand Calculations.
• Prepare take-off prior submission to higher level to issues the PO.
•Plan and manage input to CAD, CAE for production of shop drawing work how a keen willingness to engage and participate within the group's strategy for all shop drawing related issues.
•Preparing a plan with our team related to construction progress (Look ahead/ Actual).
• Represent the organization at meetings with clients, other professionals and suppliers.
• Undertake prior review of Sub-Contractor’s proposal mechanical & electrical system testing & commissioning methods and schedule.
• Prepare on-going list of mechanical services defects for sub-contractor’s remedial action.
• Undertake project snagging prepare list of defects for Sub Contractor’s action and close out.
• Contribute to the coordination with the other disciplines within the practice with all other members of the project Team.
• Review and comment on Contractor testing and commissioning results.
• Preparing monthly payment with sub-contractor reports prior to billing submission to estimation department.

Site Mechanical Engineer at MASH Engineering Holding Group
  • Qatar - Doha
  • July 2007 to March 2009

1-Fire alarm system for WAQOOD Petrol Station - Doha - Qatar.
2-Dulgue System & Fire Suppression System for GOLDEN Tower - West Bay - Qatar
3-Firefighting, Fire Alarm & Evacuation System for Eversundai Steel Structural Factory - Industrial Area - Qatar
4-FireFighting & Fire Alarm for AlRayan Plaza - AlRayan - Qatar
5-FireFighting hydrant & protection system for AZDAN Compound - WAKRA - Qatar
6-Fire Suppression System for 10 Substations- Around Doha - Qatar
7-FireFighting hydrant & protection system for Berlin Loft Factory - Industrial Area- Qatar
8-FireFighting & Fire Alarm for Business Park Crown Plaza Hotel - Doha- Qatar
9-FireFighting & Fire Alarm for Wakra Secondary School -WAKRA- Qatar
10- Fire Alarm for FAUCHON Paris Head Office - Doha - Qatar


Duties & Responsibilities

• Prepare and coordinate drawings based on project’s design drawings with accurate quality standard.
• Preparation of shop drawings, material take off, material submittals, RFI, tools and manpower required for the project .
• Follow up construction activities and coordination at different sites .
• Act positively and participate in all health and safety issues at site as required by the project safety representative, clients and observe site safety practices.
• Support and monitor all resource allocation at site.
• Studying and understanding of the contract documents (drawings, specifications and BOQ’s).
• Inspect or review projects to monitor compliance with building and safety standards and codes, and other regulations.
• Follow up construction activities and coordination at different sites .
• Communications with consultants and clients for technical approvals.
• Assist the managing in reviewing the scope of work by identifying change conditions or work outside the scope and complying with codes, standard and latest authority's regulation for any necessary changes required related to life safety.
• Assist in preparation the project's close out documents, as built drawing...etc.
• Perform other responsibilities associated may necessary for company & project benefits.

Trainer at MIDDLE EAST OIL REFINERY
  • Egypt - Alexandria
  • April 2004 to July 2004

I was one of the trainer in the follow up departement

Education

Bachelor's degree, Bachelor of Science in Mechanical Engineering
  • at Benha University – Egypt
  • November 2007

discipline of engineering that applies the principles of physics and materials science for analysis, design, manufacturing, and maintenance of mechanical systems. It is the branch of engineering that involves the production and usage of heat and mechanical power for the design, production, and operation of machines and tools.[1] It is one of the oldest and broadest engineering disciplines. The engineering field requires an understanding of core concepts including mechanics, kinematics, thermodynamics, materials science, structural analysis, and electricity. Mechanical engineers use these core principles along with tools like computer-aided engineering and product lifecycle management to design and analyze manufacturing plants, industrial equipment and machinery, heating and cooling systems, transport systems, aircraft, watercraft, robotics, medical devices, and others.

Diploma, Computer sience and Electronic Control
  • at The Collage of Technology
  • April 2001

Electronic Control Math- Higher Grade Physics - Higher Grade Circuits - Higher Grade Control - Higher Grade

Specialties & Skills

Team Leadership
Leading Projects
Hotel Site Selection
Managed Services
Workshop Design
LEED Guidance
AutoCAD 2007
Fire Fighting Principal of Design
The Basic of Sustainable Design
Understanding the Non-Nuclear Stamp process
API 1104 Pipe line welding
BPV code ,Section VIII ,Duvision 1,2,3
ASME B31.1
ASME B31.3
API 1169 Pipe line inspector

Languages

Arabic
Expert
English
Expert

Memberships

American Society of Mechanical Engineers (ASME)
  • Member
  • December 2011
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)
  • Member
  • December 2011

Training and Certifications

Basic and Advance Hydraulic (Training)
Training Institute:
Technology Competency Center
Date Attended:
March 2008