Total Years of Experience: 36 Years, 6 Months
December 2017
To Present
Assistant Engineer
at Pakistan LNG Terminals Limited
Location :
Pakistan - Islamabad
Participated and lead in commissioning of LNG jetty and CTS (custody transfer station).
Provides technical support as well as monitoring reliability and availability of installation.
Provides technical support as well as monitoring reliability and availability of installation.
March 2012
To Present
Electrical Technician
at GASCO (Abu Dhabi Gas Industries Limited) C/O ADNOC
Location :
United Arab Emirates - Abu Dhabi
· To ensure the integrity and reliability of electrical system/equipment, in view of equipment age and obsolescence.
· To carry out preventive maintenance activities based on Maximo work orders, and carry out skilled maintenance, repair and testing of electrical equipment.
· To participate in the assigned plant shutdown activities and ensure timely completion of job activities.
· To isolate and energize LV and HV motors and accept electrical permit to work.
· To comply with all company Health, Safety and Environment as well as Work Permit, policies and procedures.
· To provide work direction and instruction to the contractor craftsman.
· To verify completed maintenance activities and ensure that the job is performed as per requirement and complete the maintenance activity sheet.
· To collect technical data from the field if requested by senior technician/area engineer.
· To provide On Job Training to meet Competency Based Training programs for UAE Nationalization.
· To provide input for the preparation of Method statements and Initiate Near miss reports.
· To identify areas for improvement in the activities performed and assist the senior section personnel to carry out modifications and improvements to the system.
· To carryout visual inspection and be vigilant to identify any developing problem in the area assigned, and report any problems to relevant supervisor.
· To participate in Emergency Response duties as a team member.
· To carry out preventive maintenance activities based on Maximo work orders, and carry out skilled maintenance, repair and testing of electrical equipment.
· To participate in the assigned plant shutdown activities and ensure timely completion of job activities.
· To isolate and energize LV and HV motors and accept electrical permit to work.
· To comply with all company Health, Safety and Environment as well as Work Permit, policies and procedures.
· To provide work direction and instruction to the contractor craftsman.
· To verify completed maintenance activities and ensure that the job is performed as per requirement and complete the maintenance activity sheet.
· To collect technical data from the field if requested by senior technician/area engineer.
· To provide On Job Training to meet Competency Based Training programs for UAE Nationalization.
· To provide input for the preparation of Method statements and Initiate Near miss reports.
· To identify areas for improvement in the activities performed and assist the senior section personnel to carry out modifications and improvements to the system.
· To carryout visual inspection and be vigilant to identify any developing problem in the area assigned, and report any problems to relevant supervisor.
· To participate in Emergency Response duties as a team member.
September 2011
To March 2012
Maintenance Technician (Electrical)
at United Energy Pakistan Limited (UEPL) Formerly BP Pakistan.
Location :
Pakistan
• To maintain power generation (gas generators up to 1 MW and diesel generators up to 210 kW) monitoring and troubleshooting.
• To maintain Motor Control Center’s (MCC’s) (Westinghouse, Cutler Hammer, etc., ) monitoring and troubleshooting.
• To maintain L.T. switch-gears (G.E., ABB, etc., ) / panels.
• To maintain Soft Starters (BENSHAW, Siemens, Cutler Hammer, etc., ) monitoring and troubleshooting.
• To maintain Uninterrupted Power Supply (UPS) (HDR, AMETEK, etc.) system monitoring and troubleshooting.
• To maintain static / rotary battery charger / regulated battery chargers monitoring and troubleshooting.
• To maintain plant hard wire ladder logic control system monitoring and troubleshooting of electrical control accessories (Merlin Gerin, Telemecanique, ABB, ALSTOM, GE, etc.)
• To maintain Distribute Control System (DCS), Human Machine Interface (HMI), Panel View, etc., monitoring and troubleshooting.
• To maintain Programmable Logic Controller (PLC) (Siemens SCHEMATIC, Allen Bradley, GE Fanuc, REMView etc., ) system monitoring, troubleshooting and offline / online ladder editing. Comprehensive knowledge of SLC 500, Micro logics 5000, RS Linx, RS View, etc.
• To maintain Supervisory Control & Data Acquisition (SCADA) system monitoring and troubleshooting.
• To maintain gas compressors (reciprocating, screw, etc., ) control system monitoring and troubleshooting.
• To maintain PD (positive displacement) / jet pumps control system monitoring and troubleshooting.
• ALTRONIC: A renowned name in E & P for Ignition and Control System.
Comprehensive knowledge of all types of ALTRONIC Ignition System, Engine Controls, Instruments & Micro-controllers, Altronic Control Panels, etc.
• FW MURPHY: A renowned name in E & P for Engine Control System.
Comprehensive knowledge of all types of Micro-controllers (Tattletale, TTDJ, TTD-H, Millennium, etc.), switches, electrical accessories, gauges, etc.
• To maintain Fire Alarm System (FAS) (GENT) ionization and photoelectric smoke, etc.
• To maintain Motor Control Center’s (MCC’s) (Westinghouse, Cutler Hammer, etc., ) monitoring and troubleshooting.
• To maintain L.T. switch-gears (G.E., ABB, etc., ) / panels.
• To maintain Soft Starters (BENSHAW, Siemens, Cutler Hammer, etc., ) monitoring and troubleshooting.
• To maintain Uninterrupted Power Supply (UPS) (HDR, AMETEK, etc.) system monitoring and troubleshooting.
• To maintain static / rotary battery charger / regulated battery chargers monitoring and troubleshooting.
• To maintain plant hard wire ladder logic control system monitoring and troubleshooting of electrical control accessories (Merlin Gerin, Telemecanique, ABB, ALSTOM, GE, etc.)
• To maintain Distribute Control System (DCS), Human Machine Interface (HMI), Panel View, etc., monitoring and troubleshooting.
• To maintain Programmable Logic Controller (PLC) (Siemens SCHEMATIC, Allen Bradley, GE Fanuc, REMView etc., ) system monitoring, troubleshooting and offline / online ladder editing. Comprehensive knowledge of SLC 500, Micro logics 5000, RS Linx, RS View, etc.
• To maintain Supervisory Control & Data Acquisition (SCADA) system monitoring and troubleshooting.
• To maintain gas compressors (reciprocating, screw, etc., ) control system monitoring and troubleshooting.
• To maintain PD (positive displacement) / jet pumps control system monitoring and troubleshooting.
• ALTRONIC: A renowned name in E & P for Ignition and Control System.
Comprehensive knowledge of all types of ALTRONIC Ignition System, Engine Controls, Instruments & Micro-controllers, Altronic Control Panels, etc.
• FW MURPHY: A renowned name in E & P for Engine Control System.
Comprehensive knowledge of all types of Micro-controllers (Tattletale, TTDJ, TTD-H, Millennium, etc.), switches, electrical accessories, gauges, etc.
• To maintain Fire Alarm System (FAS) (GENT) ionization and photoelectric smoke, etc.
July 2002
To September 2011
Maintenance Technician (Electrical)
at British Petroleum Pakistan Limited (BP)
Location :
Pakistan
• To maintain power generation (gas generators up to 1 MW and diesel generators up to 210 kW) monitoring and troubleshooting.
• To maintain Motor Control Center’s (MCC’s) (Westinghouse, Cutler Hammer, etc., ) monitoring and troubleshooting.
• To maintain L.T. switch-gears (G.E., ABB, etc., ) / panels.
• To maintain Soft Starters (BENSHAW, Siemens, Cutler Hammer, etc., ) monitoring and troubleshooting.
• To maintain Uninterrupted Power Supply (UPS) (HDR, AMETEK, etc.) system monitoring and troubleshooting.
• To maintain static / rotary battery charger / regulated battery chargers monitoring and troubleshooting.
• To maintain plant hard wire ladder logic control system monitoring and troubleshooting of electrical control accessories (Merlin Gerin, Telemecanique, ABB, ALSTOM, GE, etc.)
• To maintain Distribute Control System (DCS), Human Machine Interface (HMI), Panel View, etc., monitoring and troubleshooting.
• To maintain Programmable Logic Controller (PLC) (Siemens SCHEMATIC, Allen Bradley, GE Fanuc, REMView etc., ) system monitoring, troubleshooting and offline / online ladder editing. Comprehensive knowledge of SLC 500, Micro logics 5000, RS Linx, RS View, etc.
• To maintain Supervisory Control & Data Acquisition (SCADA) system monitoring and troubleshooting.
• To maintain gas compressors (reciprocating, screw, etc., ) control system monitoring and troubleshooting.
• To maintain PD (positive displacement) / jet pumps control system monitoring and troubleshooting.
• ALTRONIC: A renowned name in E & P for Ignition and Control System.
Comprehensive knowledge of all types of ALTRONIC Ignition System, Engine Controls, Instruments & Micro-controllers, Altronic Control Panels, etc.
• FW MURPHY: A renowned name in E & P for Engine Control System.
Comprehensive knowledge of all types of Microcontrollers (Tattletale, TTDJ, TTD-H, Millennium, etc.), switches, electrical accessories, gauges, etc.
• To maintain Fire Alarm System (FAS) (GENT) ionization and photoelectric smoke, etc.
• To maintain Motor Control Center’s (MCC’s) (Westinghouse, Cutler Hammer, etc., ) monitoring and troubleshooting.
• To maintain L.T. switch-gears (G.E., ABB, etc., ) / panels.
• To maintain Soft Starters (BENSHAW, Siemens, Cutler Hammer, etc., ) monitoring and troubleshooting.
• To maintain Uninterrupted Power Supply (UPS) (HDR, AMETEK, etc.) system monitoring and troubleshooting.
• To maintain static / rotary battery charger / regulated battery chargers monitoring and troubleshooting.
• To maintain plant hard wire ladder logic control system monitoring and troubleshooting of electrical control accessories (Merlin Gerin, Telemecanique, ABB, ALSTOM, GE, etc.)
• To maintain Distribute Control System (DCS), Human Machine Interface (HMI), Panel View, etc., monitoring and troubleshooting.
• To maintain Programmable Logic Controller (PLC) (Siemens SCHEMATIC, Allen Bradley, GE Fanuc, REMView etc., ) system monitoring, troubleshooting and offline / online ladder editing. Comprehensive knowledge of SLC 500, Micro logics 5000, RS Linx, RS View, etc.
• To maintain Supervisory Control & Data Acquisition (SCADA) system monitoring and troubleshooting.
• To maintain gas compressors (reciprocating, screw, etc., ) control system monitoring and troubleshooting.
• To maintain PD (positive displacement) / jet pumps control system monitoring and troubleshooting.
• ALTRONIC: A renowned name in E & P for Ignition and Control System.
Comprehensive knowledge of all types of ALTRONIC Ignition System, Engine Controls, Instruments & Micro-controllers, Altronic Control Panels, etc.
• FW MURPHY: A renowned name in E & P for Engine Control System.
Comprehensive knowledge of all types of Microcontrollers (Tattletale, TTDJ, TTD-H, Millennium, etc.), switches, electrical accessories, gauges, etc.
• To maintain Fire Alarm System (FAS) (GENT) ionization and photoelectric smoke, etc.
October 2000
To July 2002
Junior Management Trainee (Electrical)
at Attock Cement Pakistan Limited
Location :
Pakistan
• To maintain 132 / 6.6 kV grid station power consumption monitoring, feeder protection, isolation and troubleshooting.
• To maintain 6.6 / 0.4 kV sub stations monitoring and troubleshooting.
• To maintain H.T. / L.T. switch-gear / panels monitoring and troubleshooting.
• To maintain Motor Control Center’s (MCC’s) monitoring and troubleshooting.
• To maintain Uninterrupted Power Supply (UPS) system monitoring and troubleshooting.
• To maintain battery charger / regulated battery chargers monitoring and troubleshooting.
• To maintain plant hard wire ladder logic control system monitoring and troubleshooting of electrical control accessories (Merlin Gerin, Telemecanique, ABB, ALSTOM, GE, etc.)
• To maintain Programmable Logic Controller (PLC) (Siemens SCHEMATIC) system monitoring, troubleshooting and offline / online ladder editing.
• Maintenance / overhauling of H.T. / L.T. switch-gears up to 132 kV (Hydro pneumatic, OCB, SF6 ACB, etc.)
• Maintenance of power transformers up to 25 MVA.
• Maintenance / overhauling of MOTORS up to 2 MW.
• Maintenance / overhauling of RHEOSTATS (oil and water immersed) for slip-ring motors.
• Maintenance of ELECTROSTATIC system.
• To maintain overhead cranes, winches, welding machines / generator, passenger lifts, etc. monitoring and troubleshooting.
• To maintain 6.6 / 0.4 kV sub stations monitoring and troubleshooting.
• To maintain H.T. / L.T. switch-gear / panels monitoring and troubleshooting.
• To maintain Motor Control Center’s (MCC’s) monitoring and troubleshooting.
• To maintain Uninterrupted Power Supply (UPS) system monitoring and troubleshooting.
• To maintain battery charger / regulated battery chargers monitoring and troubleshooting.
• To maintain plant hard wire ladder logic control system monitoring and troubleshooting of electrical control accessories (Merlin Gerin, Telemecanique, ABB, ALSTOM, GE, etc.)
• To maintain Programmable Logic Controller (PLC) (Siemens SCHEMATIC) system monitoring, troubleshooting and offline / online ladder editing.
• Maintenance / overhauling of H.T. / L.T. switch-gears up to 132 kV (Hydro pneumatic, OCB, SF6 ACB, etc.)
• Maintenance of power transformers up to 25 MVA.
• Maintenance / overhauling of MOTORS up to 2 MW.
• Maintenance / overhauling of RHEOSTATS (oil and water immersed) for slip-ring motors.
• Maintenance of ELECTROSTATIC system.
• To maintain overhead cranes, winches, welding machines / generator, passenger lifts, etc. monitoring and troubleshooting.
Share on Facebook
Share on Twitter
Share Via Email