dixitkumar patel, INSTRUMENTATION PROJECT & MAINTENANCE ENGINEER

dixitkumar patel

INSTRUMENTATION PROJECT & MAINTENANCE ENGINEER

specialized oil services.

Location
Qatar
Education
Bachelor's degree, ELECTRONIC engineer
Experience
12 years, 8 months

Share My Profile

Block User


Work Experience

Total years of experience :12 years, 8 months

INSTRUMENTATION PROJECT & MAINTENANCE ENGINEER at specialized oil services.
  • Qatar - Doha
  • My current job since November 2013

Instrumentation & Electrical Engineer in various oil & gas Plant - Qatar Gas Onshore Plant, WAQOOD Raslaffan area, Q-Chem (Qatar chemical company), Qatar Fuel Additives Company Limited (QAFAC), Mesaieed area, RasGas Barzan platform Offshore, Qatar gas NFB Offshore Platform, Qatar Petroleum Dukhan area.

Roles and Responsibilities

• Leading Instrument Project & Maintenance Section having team of senior Foreman/supervisors, Technicians and draftsmen.
• Reporting to the project manager for all the aspects of Instrumentation & Electrical maintenance & construction / quality activities. Responsible for assigning work to Team Leader Job distribution and manpower planning.
• Also responsible to perform instrument & Control project engineering works, creation and follow up of purchase orders / contracts, follow-up of construction and commissioning activities, project hand over and final documentation.
• Assist engineers with initial design and drawing requirements.
• Establish drawing set-up procedures applicable to the job for drafting personnel.
• Conceptualize and draw wiring diagrams, E&I layouts, and design details independently with minor instruction from project engineering.
• Successfully resolving all material, contractual and engineering issues and managing the budget and schedule for the entire Instrumentation scope of the project.
• Replacement of April 5000 PLCs in different Sub-stations UPSTREAM area & Down Stream Area Sub-Station in Qatar Gas Plant, Ras Laffan area- Shutdown Maintenance Job.
• installation “SEPAM Series 80” Digital Protection Relays in the existing cubicle “Synchro Panel’ LOCATION: PCC Attached to the sub-station SS0901, QG1, Qatar Gas, Ras Laffan & Qatar gas NFB Offshore platform.
• Working as Addition of marshaling cabinets and PDB cabinets for the future use will be done online and during Shutdown. All Pre-shutdown work will be listed and accomplished prior to shut down while the plant is live and those that are to be executed during shutdown will be identified and executed during the Shutdown & Instrument loop drawings, instrument panel design, Equipment Layout, Preparation Of Qatar Fuel Additives Company Limited (QAFAC).
• WOQOD intends to replace the existing Diesel Pump Control Panel in Old Service Berth & Radar type level Transmitter Installation and Commissioning job
• replacement & upgrade the existing VISTA NET SYSTEM currently installed in the plant facilities at Mesaieed, Q-CHEM
• Designed, drafted and placed cable trays, cabinets, junction boxes and other equipment in four Electrical and Instrument buildings utilizing PDMS 3-D version 11.5 drafting software.
• Good working experience in various phases of Projects like Basic Engineering, Front End Engineering Design (FEED), and Detailed Engineering including Project Co-ordination.
• Ability to troubleshoot instruments and Safety Instrumented Systems
• Provided technical support to instrument engineering activities in refinery
• Maintained equipment’s and prioritized their repair according to need
• Checking for Installations of instrument as per hook-up drawings.
• Preparation of mark-ups for engineering modifications at site.
• Assistance in Solving the Engineering queries from client/Contractor.
• Preparation of Functional Loop Schematics.
• Preparation of Specification & Data sheets of Control valve & On-off valve, Pressure & Temperature gauge, Orifice Plate, Magnetic & Mass Flow meter, Radar & Servo type level transmitter, level switch, Pressure transmitter, Temperature Element & transmitter.
• Preparation of PLC I/O list.

JUNIOR INSTRUMENTATION ENGINEER at SPECIALIZED OIL SERVICES (SOS) DOHA
  • Qatar - Doha
  • November 2012 to November 2013

INSTRUMENTATION SYSYTEM

QATAR GAS INSTRUMENT MAINTENANCE PROJECT
• DCS operating System - (Yokogawa, Siemens, ABB)
• Pressure transmitters-(Honeywell, Rosemount and ABB)
• Pressure Switches & Gauges
• Temperature Transmitters (RTD & TC)
• Pneumatic pressure transmitters
• Flow Transmitters, Level Transmitters and Differential Pressure Transmitters.
• Zone Control Valves
• Deluge Systems

Roles and Responsibilities
• Jobs involved Cleaning and Servicing of Field Instruments, replacing the old instruments with new ones as per the shutdown plan, alarm and trip checks, calibration of instruments like transmitters, level troll, switches, I/P Converters, and field calibrating them if required.
• Checking of temperature Detectors. Check the impulse tubing and fittings for any leaks and replace them if required. Installed electronic transmitters in the place of pneumatic transmitters and commissioning them as per the procedures lay down. Also check the ESD loops as per the procedures
• Development of procedure for performing calibration, installation and commissioning related activities.
• Manpower planning and mobilization, material planning and its flow control, consumables arrangements, safety coordination, attending safety and progress meeting, coordination with client, permits. Identify tools and test instruments required for performing various activities & prepare data sheet for their procurement.
• Review of P& ID, Hookup drawings, Instrument location & wiring layout, air Flow Diagrams.
• Control Loop Checking and Testing
• Calibration of various Process Control Instruments, Control Valves & Switches
• Field Engineering, Assisting in Modification of system design (Internal panel modification, addition of modules in Panel) as per Client requirement etc.

Junior Instrument Engineer at MEDGULF CONSTRUCTION
  • Qatar - Doha
  • July 2012 to September 2012

QATAR PETROLEUM DUKHAN - MAINTENANCE

Roles and Responsibilities
• Experience in installation & checking various types’ smoke detectors, heat detectors, LEL detectors and toxic gas detectors. Flame detector
• Gained Experience in Calibration of smart Transmitter for Pressure, Differential pressure, Temperature, Level Measurement of reputable manufacturers such as Rosemount (Model 3051 C), Honeywell (300 Series). Familiar with use and application of communicators using HART protocol (375).
• Carried out in workshop calibration test and field installation of Control Valves of Masoneilan and Fisher.
• Carryout meager and continuity test of instrument/electrical cables.
• Lay and Terminate instrument and power cables in field and control room
• Familiar with the mechanical inspection of newly installed instrument as per client requirement.

Junior Instrument Engineer at Sawant Contractor
  • India - Surat
  • June 2011 to June 2012

ONGC Oil and Natural Gas Corporation Limited
MASTER EQUIPMENT'S USED
• Hart communication (Emerson 275, 375)
• Honeywell Pressure Calibrator (Druck)
• Portable hand pump & dead weight tester
• Loop Calibrator & Thermocouple • Calibrator & Decade Box
• I/P Simulator
• Temperature bath
• Digital Multimeter (Fluck)

Different Kinds of Instrument for Example
• Control Valves.: Mesoneillan, Fisher, Valtek flow serve, Delma
• Positioner: pneumatic & smart (Fisher Rosemount, Foxboro, Mesoneillan, Flow servo)
• Level trolls: Mesoneillan, Honeywell, Rosemount, Foxboro
• Transmitters: (Rosemount, Yokogawa, Honeywell, Foxboro-smart) (Taylor-pneumatic)
• Temperature Element: RTD (two & three wire) Thermocouple
• All type of Switches (High & Low) Gauges, I/P converter Pneumatic Controllers Testing and Repairing
• All types of Panel testing & Loop Checking
• Reading of P&ID and General Drawing

Job Description
• Understand and Interpret approved for Construction drawings of consultant for field installation of Instruments, Impulse tubing, Cable Junction boxes, Support etc.
• Carryout calibration of instruments and prepare test certificate.
• Carryout meager and continuity test of instrument/electrical cables.
• Lay and Terminate instrument and power cables in field and control room.

Education

Bachelor's degree, ELECTRONIC engineer
  • at G. H. raisoni college of engineering
  • November 2011

• Fundamental science and engineering topics including digital and analog electronics, computer programming, mathematics and physics. • Topics dealing with a variety of areas including microprocessors, signal processing, and motor and actuators. • Knowledge to plan, design and build the electronic circuitry that is integral to so many high technology applications.

Diploma, ELECTRICAL ENGINEERING
  • at VIDYA BHARTI POLYTECHNIC UMRAKH
  • June 2008

• Electrical engineering deals with various electric-related issues like electric power engineering, electronics, power electronics and involves designing, developing, testing and supervising the production of electrical and electronic equipment and machinery. An electrical engineer is also responsible for solving various issues of electronic systems which can be large scale (electric-power engineering) or small scale (Nano electronics). • Sub-disciplines of electrical engineering include: microelectronics, telecommunication engineering, signal processing, control engineering, computer engineering, integrated circuits, digital electronics, power engineering, and optoelectronics.

Specialties & Skills

System Automation
AutoCAD
Instrumentation

Languages

English
Intermediate
Hindi
Expert
Gujarati
Native Speaker

Training and Certifications

INTERNAL AUDITOR TRAINING: ISO 9001:2015 & OHSAS 18001:2007 (Training)
Training Institute:
ABS QUALITY EVOLUTIONS :
Date Attended:
August 2016
Duration:
40 hours
PLC (Programmable logic controller) (Training)
Training Institute:
NCVT Private Limited
Date Attended:
October 2011

Hobbies

  • Puzzles
    Excellent problem-solving skills