Vishak Kumar Jayakumar Kokila, Instrument Engineer

Vishak Kumar Jayakumar Kokila

Instrument Engineer

Fluor Hyundai

Location
Kuwait
Education
Master's degree, Instrumentation
Experience
15 years, 3 months

Share My Profile

Block User


Work Experience

Total years of experience :15 years, 3 months

Instrument Engineer at Fluor Hyundai
  • Kuwait - Al Ahmadi
  • My current job since March 2018

• Oil & Gas Field instrumentation and devices installation including as per the design and solving the issues as per site situation.
• SAT witnessing and function checks such as BOM, SDM, Controller redundancy checks, I/O checks and reviewing other System cabinet’s documentation.
• Supervised construction of field instruments erection as per design.
• Lead a team for permorming the loop test with company representative like KIPIC, KNPC Shell, ADGAS, Qatragas.
• Loop folder review with the P&ID, Data sheets and field instruments calibration reports.
• Having good System knowledge on DCS, IPS and FGS and Appliction logic checking.
• Reported to Instrument Construction & Commissioning Manager for work fronts implementation.
• Instrument& Control Engineering domain knowledge for Equipment/systems (such as Controlsystem, field instruments, analyzer, telecom, ESD /F&G system DCS Honey Well C300 controller, EPKS System & Emerson.
• Co-ordinate with loop checking and testing team, Calibration of various process control instruments & computer based process control systems.
• Reading & Understanding of Engineering drawings such as P&IDs, ILDs, Hook up drawings, & troubleshooting of Ladder Logic, Functional Block diagrams, Cause & Effect diagrams - Updating and modifying according to requirement and P&ID review as required on site.
• Downloading Field Foundation Segment in DCS. Configuration Alarm and checking Alarm
• Maintenance, calibration and trouble shooting of field instruments like temperature, pressure, level, DP .
• Experience in review of datasheet, specification sheet drawing, sizing calculation to finalize Instruments.

Metering Specialist at Qatargas
  • Qatar - Doha
  • May 2014 to December 2016

• Provide Custody Transfer Tank Gauging & Metering technical support for maintenance, Reliability and operation of custody transfer Tank Gauging & Metering Equipment’s.

• Had been responsible for the Annual Validation checks like Analog to digital(ADC) Check for PT and TT calibration, Flow Rate, Flow Total calculation in the Flow Computer.

• Responsible for the monthly Perodic Maintance check such as Pressure and Temperature Transmitter Calibration, TE spot check and cavity pressure check for the metering skids like Feed Gas, Helium, LNG, Propane, Ethane, Selexol, liqudsulphur, BOG and BUG.

• Had been responsible for the Annual Validation checks like Analog to digital(ADC) Check for PT and TT, Flow Rate, Flow Total calculation for the Flow Transmiter.

• Performed Health Check of Instromat USM using Uniform Software, Health Check for Caldon USM using Lefm Software and Health check for Sick 600 USM using Mepoflow Software for the Metering Skids.

• Responsible for carrying out preventive and corrective maintenance of skid instruments.

• Meter proving with Bi-Directional (Ball)prover and compact prover.

• Responsible for drafting and maintaining preventive and corrective maintenance documents of all tank gauging and metering systems for internal and shareholders audit.

• Provide technical assistance and resolution/troubleshooting support.

• Responsible for preparation of valid Job Safety Analysis (JSA) and Toolbox Talk (TBT) for work.

• Responsible for conducting TBT in the field before and after the work.




• Provide technical support to Distributed Control System (DCS) operator in performing the required functional tests and audits on various system integrated from different vendors.

• Performing meter proving and maintenance of Prover, both small volume Prover and ball Prover.

• Deftly drafting and maintaining metering systems documentation for Qatar Gas’ Shareholders Audit.

Instrumentation Engineer at Hyundai
  • United Arab Emirates - Abu Dhabi
  • April 2011 to October 2013

• Perform Preventive and Corrective maintenance job on Fiscal and custody transfer Metering Skid Instruments’ Ultrasonic Flow Meter, Coriolis Flow Meter.

• Perform annual validation, calibration with vendor.

• Meter proving with Bi-Directional (Ball)prover and compact prover.

• Perform Peroidic Maintanance and Corrective Maintance job on Enraf Tank Level Gauge Displacer Type, Rosemount Radar Level Gauge.

• Calibration, Status check and trouble shooting on DP Type Meter, Densitometer, PT, TT, MOV.

• Routine health check of USM, Coriolis Meter, Radar level gauge.

• Emerson Flow Boss S600 Flow Computer Configuration check.

• Generate Daily, Weekly, Monthly Reports of flow and level.

• Prepare Permit for next day Planned job.

• Approval of metering and analyzers OPERCOM functional test sheets and advice on commissioning activities related to metering and analyzers.

• Carry out inspection for metering and analyzers equipments to check for compliance with Company specifications.

Instrument Engineer at Shell
  • Qatar - Doha
  • April 2008 to October 2011

• Performed cable scheduling works, Erection of support and trays, calibration and documentation.
• Checked P&ID and reviewed as required on site.
• Checked instrument documents and reviewing as required on site.
• FAT witnessing and other System cabinet’s documentation
• Supervised construction of field instruments erection and termination.
• Checked field instruments calibration reports
• Having good System knowledge and logic checking.
• Oil Field instrumentation and devices installation
• PLC controls, safeguard systems, condition monitoring and control system interfaces.
• Inspected compressor / turbine controls.
• Witnessed bump test for vibration monitoring system.
• Carried out gas compressor surge control system loop testing.
• Witnessed fire & gas, ESD and PSS system functional test.
• Operated Plant Information Management System Software.
• Coordinated with other disciplines regarding material deliveries, fabrication, and installation and testing of equipment.
• Liaised with Shell Client and KBR PMC to issues related to job.
• Reported to Instrument Construction Manager for work fronts implementation.
• Worked with HONEYWELL EXPERION DCS System.
• Handled punch list closing and Final acceptance handover

Education

Master's degree, Instrumentation
  • at Manav Bharathi
  • April 2011

Specialties & Skills

Instructing
Project Execution
Leadership Development
Instrumentation
Problem Solving
PLC,DCS SCADA

Languages

English
Expert

Training and Certifications

Honeywell (Certificate)
Date Attended:
September 2008