Jorge Nagal, MEP Construction Assurance Engineer

Jorge Nagal

MEP Construction Assurance Engineer

LB-Egis Rail JV/QPM(Doha Metro Project Greenline Elevated & At Grade )

Lieu
Qatar - Doha
Éducation
Baccalauréat, Electrical Engineering
Expérience
28 années, 7 mois

Partager Mon CV

Empêcher usager


Expériences professionnelles

Total des années d'expérience :28 années, 7 mois

MEP Construction Assurance Engineer à LB-Egis Rail JV/QPM(Doha Metro Project Greenline Elevated & At Grade )
  • Qatar - Doha
  • Je travaille ici depuis juillet 2018

• QMS and Quality Policy
• Gaining QMS awareness of Corporate and Project Quality Policy requirements and their pursuit.
• Monitor works for compliance legally and with Employer’s Requirements; Qatar Construction Specification (2014); Euro Norm (EN); British Standards (BS); International Standards and Codes of Practice and highlight anomalies to CSL.
• Input into the attainment of pertinent KPIs.
• Monitor and report upon the Contractor’s observance of their QMS.
• Attend on a randomised basis Contractor ITP briefings to their staff.
• Report to the CSL any works commenced prior to its ITP being granted SONO.
• Review Contractor IREs and ITP intervention points, attend and witness inspection and testing conducted and the recording of the outcome as either ‘Right First Time’, ‘With Comments’ or ‘Fail’.
• Where a ‘Fail’, assure that Contractor issues an NCR in a reasonable time-frame and references on IRE.
• Monitor the use of MME to assure it is of requisite accuracy, and that records of all such equipment and its calibration are maintained.
• Assure that the Contractor records instances of non-conforming works, not rectifiable within the shift, as NCRs, with a realistic period for their close-out, proposes requisite corrections and corrective actions to NCRs.
• In the event of the Contractor failing to issue NCRs advise CSL accordingly.
• Monitor, audit & inspect the JV to ensure compliance with the Qatar Legislation, Qatar Construction Specifications and Employers Requirements.
• Intervene where required (unsafe acts and conditions) to ensure the safety of all.
• Report all accidents, incident and Near Missis.
• Raise all safety concerns to the relevant parties.
• Seek specialist advice from H&S team where required
• Assist in information gathering post-accident/incident

Lead MEP Construction Supervisor à Jacobs International/QPM (Doha Metro project, RNUGS)
  • Qatar
  • novembre 2016 à juin 2018

• Responsible for reviewing of submittals such as Method statements, ITP’s. Material approval and drawings.
• Generating/formulating datasheets that can help in the monitoring of key items such as progress and take off, providing assurance that the Design and Build Contractor is progressing with the observed construction activities in accordance with the Employer’s requirements and the approved “ For Construction” documents which is uploaded in the ACONEX in which the status is either of SONO or NOWC and have been certified by the Design Verification Engineer where appropriate.
• Conducting Quality Assurance services through the implementation of a three phase control and oversight system. i.e.; preparatory phase, initial phase and follow up phase.
• Attending initial and follow-up inspections in accordance with approved and applicable quality control plans.
• Inspecting the ContrMaterial inspection to all MEP services installation including Life and Safety Systems for Underground stations and tunnel Works in Redline Underground stations and Tunnel for Doha Metro Project. Under Qatar rail.
• Witnessing all the inspection request and assists in Supervising Main contractor activities. Verification and Closing all commented Non conformances after the approved rectification proposal and correction completed.
• Checking and witnessing all installation works done as per the raised IRE activities, Including the Fire Alarm System, Fire Suppression System, HVAC, Clean Agent System, Fire Pumps, Domestic Water Supply Lines, Drainage lines and Fire Fighting System. Lighting controls and all Access Controls.
• Prepare Daily Progress Report to Qatar Rail and Monitor the quality and Health and Safety of Workers during daily activities. Ensure that works follow as per the approved drawing and specifications pertaining to QCS requirements.
• Monitor all related activities in construction, Installation of supports and equipment and testing activities to ensure compliance with specifications, codes and clients requirements.
• Assist Client in all aspects of the final acceptance of the works and close out of all applicable contracts.

Sr. Electro-mechanical Inspector à Transpo Group
  • Émirats Arabes Unis - Abu Dhabi
  • janvier 2015 à juin 2016

• Responsible for all MEP inspection for Operation and Maintenance activities like Preventive maintenance works and Corrective maintenance works in Sheikh Zayed Tunnel and Inspection of corridors for operation of all MEP Systems under the Abu Dhabi Municipality.
• Witnessing the corrective activities for any fault or defects in operation of all system in the tunnel operation. Verification and Closing all commented defects after the Inspection of correction completed.
• Checking and witnessing all preventive maintenance works done as per the maintenance list activities, Including the PPM of Fire Alarm System, Fire Suppression System, HVAC, FM 200, Fire Pumps, Misting System, Domestic Water Supply Lines and Fire Fighting System. Inspection of facilities including the H.V., M.V. SMDB’s, DB’s, Transformers, CPU, Diesel generator sets and monitors all the Functions of ELV/PLC, SCADA Interface. PTZP, VMS, VIDS, VVDS, FCU, Dampers, Lighting controls and all Access Controls.
• Coordinate with maintenance contractors regarding the PPM and corrective activities schedule and verify the permit to works and all the lane closure requests prior to schedule and approval.
• Follow up all the defects found in the facility and report immediately to ADM Operation and Maintenance Manager.
• Prepare daily, monthly/periodic reports based on agreed KPIs to demonstrate the effectiveness of the Tunnel Control Center operation and services delivered and ensure works follow the approved drawing and specifications pertaining to Quality & safety.
• Monitor all related activities in construction, Installation, Maintenance, support, documentation and testing activities to ensure compliance with specifications, codes and clients requirements
• Reviews specifications, purchase orders, subcontractors, inspection reports, inspection reports, delivery schedules, instruction manuals and technical data.
• Monitor and review all preventive, corrective and emergency programs and works proposed and undertaken by the contractors.
• Review and approve Contractor’s reports, documentation, technical notes and deliverables to ensure ITP's, approvals and witness points are included.
• Assist Client in all aspects of the final acceptance of the works and close out of all applicable contracts.

Sr. MEP QC Engineer à Belhasa Six Construct
  • Émirats Arabes Unis - Dubaï
  • juillet 2013 à décembre 2014

• Responsible for all MEPS QA/QC works like (Material Inspection, Installation Inspection and T & C Inspection). Verification and Closing all rejected Inspection and all QSO/NCR received from the Consultant. Checking and witnessing all Testing & commissioning stages performance including Fire Alarm System, Fire Suppression System, HVAC, FM 200, Fire Pumps Testing, CHWP Water Supply Lines and Fire Fighting System. Initiate and Witnessing the power supply provision for all Depot area. Verify the Cause & Effect, and Functional Test for ELV/BMS, SCADA Interface. HVAC, FCU, Dampers, Lighting controls and all Access Controls.
• Manage and prepare schedule to all MEP QA/QC team. Distribute the task for Electrical and Mechanical Inspection to all MEP QC Engineers/Inspectors.
• Review all rejected MIR, ITR, QSO, and NCR and propose the procedures and documents to close all the rejected items.
• Coordinate with Consultant, Construction Managers, Site Engineers and Sub-contractors regarding the inspection and materials for Depot use and discuss with the Consultant on the actual site conditions of installation.
• Conduct weekly meeting with the sub-contractor with regards to progress of works and all the requirements to close the relevant issues in work.
• Prior to pre-commissioning and commissioning works, make sure that all installed equipments are secured and all technicians are highly trained and equipped with safety instructions. All equipment must be clear from any unauthorized person in the vicinity of testing.
• Follow up Weekly and Monthly progress report to subcontractors for Higher Management Monthly presentation of progress.

Sr. E & M Engineer à Dubai Rapid Link Consortium(DURL)
  • Émirats Arabes Unis - Dubaï
  • mars 2008 à avril 2013

Responsible for all MEP works at stations; Redline, Greenline, Annexes, Cut & Cover Area, and Underground tunnel area. Coordinate with Engineers of Consultancy. Coordinate with Atkins Designers with regards to Field change requests on site. Responsible for Quality workmanship of sub-contractors. Prepares Inspection request and conduct testing with QC and Consultants.Responsible for final testing and commissioning of all the MEP system with regards to services.

MEP Engineer à Master Engineering Services WLL
  • Qatar - Doha
  • février 2004 à décembre 2007

Responsible for Testing and commissioning for the whole Project. Prepared daily activities, material requests, and inspection requests. Attended meeting with Consultants, Main contractors and Clients. Responsible for inspection of Kahrama for Electrical and water connection, Q-tel for telephone system, Ashgal for drainage system and Civil Defence for Fire Fighting System. Responsible for final inspection, testing & commissioning on all MEP works. Supervise in final testing & commissioning of the project before turn over

Éducation

Baccalauréat, Electrical Engineering
  • à Technological Institute of the Philippines
  • mars 1990

Specialties & Skills

Computer Literate
Electromechanical, Plumbing and Drainage Engineer

Langues

Anglais
Expert

Adhésions

Integrated Institute of Electrical Engineers
  • Member
  • August 1986
Philippine Instrumentation and Control Soceity
  • Member
  • September 1995

Formation et Diplômes

Risk Management Professional Exam Preparation Course (Formation)
Institut de formation:
Qatar Project Management
Date de la formation:
November 2017
Durée:
40 heures
ISO 14001 Lead Auditor (Formation)
Institut de formation:
Nigel Bauer Associates