QA/QC INSPECTOR
AL JABER and MAKHLOUF
Total des années d'expérience :33 years, 6 Mois
• Inspect Quality of works at site as per contract project specification.
• Check and conform actual testing materials.
• Check delivery of materials in conformance to required materials specification.
• Conduct actual testing of materials complying as per required data.
• Check Quality of Delivered materials conforming as per Technical Data Specification.
• Record and file the results of testing and inspection activities and prepare for acceptance by the clients.
• Ensure that inspection and testing activities are carried out in accordance with approved procedures, and to the extent specified in contract documents.
•Inspect Quality of works at site as per contract project specification.
•Check and conform actual testing materials.
•Check delivery of materials in conformance to required materials specification.
•Submit weekly progress test report for completed concrete works.
•Prepare materials quality report for billing attachment to be submitted to consultants.
•Conduct actual testing of materials complying as per required data.
•Check Quality of Delivered materials conforming as per Technical Data Specification.
•Check the Steel Reinforcement, Splicing, Spacing, Bend ties as per Contract Specification.
•Monitor the performance of laboratory testing on samples of materials such as soil, aggregates, concrete, etc. from appropriate construction site according to prescribed standards to determine conformity to specifications. Verify test results, and prepare reports describing the procedures used.
•Thermocouple monitoring for massive concrete to determine the maximum and minimum temperature and the difference between two point (max-min) of mass concrete.
•FRESH CONCRETE: Conducted and prepared trial mix design needed for the projects, performed test such as slump test, air content, unit weight and yield, bleeding test, penetration tests to determine the initial and final setting time of concrete and casting cube and cylinder samples and other incidental and related tests.
•HARDENED CONCRETE: Crushing of cube and cylinder samples, water absorption test and Pull-off test and other incidental and related tests.
•Performs laboratory analysis as per the approved standard operation procedures. Comply with the quality control programs designed to monitor the quality performance of the laboratory system, and laboratory instruments.
•Control and monitor of fresh and hardened concrete in the respective station. Conduct quality control inspection related to fresh concrete, hardened concrete.
•To assist quality control engineer for monitoring works.
•To inspect the site and collecting samples for frequency tests.
•To prepare daily progress reports.
•To maintain all laboratory records.
•Performs laboratory works related to the project of the company and other clients where the company is engaged. These include horizontal and vertical construction that need testing of materials, i.e. soil test, concrete tests and asphalt test;
•Control all plants operations (concrete plants, asphalt plants and crusher plants) in order to ensure that the production will conform to standard and specifications which result to competitive quality of materials;
•ASPHALT ( Marshall Method ):Conducted and prepared asphalt mix design (Job Mix Formula) needed for the projects:
•Aggregates:
Performed tests from hot bins such as sieve analysis, abrasion tests for coarse aggregate, soundness for coarse and fine aggregates, specific gravity and water absorption for coarse and fine aggregate, content of friable particles, and equivalent, plasticity index for fine aggregates, and thin and elongated pieces for coarse aggregates:
•Hot Mix Asphalt:t), aggregate sieve(washed), preparing marshall sample, marshall stability and flow test, retained stability test, drilling cores for density testing, bulk specific gravity of compacted mixtures, (Gmb), maximum specific gravity of bituminous paving mixtures (Gmm) and other incidental and related tests.
•ASPHALT Superpave ( Gyratory Method ):
Conducted and prepared asphalt mix design (Gyratory-Superpave method) needed for the projects.
•Aggregates:
Performed tests from the hot bins such as sieve analysis, bulk specific gravity, Gsb, apparent specific gravity, Gsa, water absorption, Pbw, coarse aggregate angularity (CAA), fine aggregate angularity (FAA), flat and elongated particles, sand equivalent, soundness, deleterious materials, toughness (LA abrasion).
• Hot Mix Asphalt:
Sampling of hot mix asphalt, determination of bituminous asphalt content (Extraction test), aggregate sieve (washed), evaluation of strength and moisture sensitivity (Tensile Strength Ratio TSR) and drilling cores for density testing:
•Monitors the progress of works at the jobsite of the company’s projects (concrete pouring for concreting works, base preparations for road constructions). These are to make sure that proper construction procedures are followed;
•Ensure that the materials and soil on the job site meet the standards required by the engineering plan.
Department of Public Works and Highways is a government agency in charge of all the construction of roads, bridges ports buildings and other infrastructure project financed by the Philippines government.
•Conduct testing on soils, aggregates and other materials needed in the project.
•Source out nearby materials for the use of the projects by having random testing of the projected materials at the work areas;
•Assist the quality control and monitor the progress of materials used in the road projects;
•Provide necessary actions and recommendation regarding the variations of the materials;
•Provide periodic quality test result and material testing reports;
•Performs all other job responsibilities that are beneficial to the company.
To control the quality of materials to be used in the project construction, conduct field and laboratory testing of materials.
On the job training as apprentice mate.
•Perform field and laboratory tests. Field duties include grading observation and soil compaction testing; compaction testing and observation of aggregate base and asphalt concrete; and obtaining samples of soil, aggregate base, and cement concrete. Laboratory testing performing standard laboratory testing for samples of soil, aggregate base, asphalt base, asphalt concrete, and cement concrete. Maintain of proper and complete files of field and laboratory data.
•CEMENT: Conducted tests such as normal consistency (time of setting of cement by vicat needle), time of setting of hydraulic cement by Gilmore needles, fineness of Portland cement by no. 200 sieve, fineness of Portland cement by air permeability apparatus, compressive strength of hydraulic cement and flow test.
•AGGREGATES: Conducted tests for aggregate to be used for concrete such as sieve analysis, moisture content determination, materials finer than the #200 sieve, computation of fineness modulus, sand equivalent, specific gravity and absorption, clay lump, soundness, abrasion test, unit weight (rodded, loose and jigging mass determination), elongation index, flakiness index, organic impurities, and all other tests necessary for the acceptance of the materials being tested.
• FRESH CONCRETE: Conducted and prepared trial mix design needed for the projects, performed test such as slump test, air content, unit weight and yield, bleeding test, penetration tests to determine the initial and final setting time of concrete and casting cylinder and beam samples and other incidental and related tests.
• HARDENED CONCRETE: Capping of cylinder samples, crushing cylinder and beam samples and other incidental and related tests.
Department of Public Works and Highways is a government agency in charge of all the construction of roads, bridges ports buildings and other infrastructure project financed by the Philippines government.