Engineering Team Leader
OSC
Total years of experience :23 years, 10 months
Client : ADNOC Gas Processing (GASCO), ARAMCO, DP
Projects
EPC projects for Offshore and Onshore, Annuli Riser, Off Plot Tie-in Platforms, Pressure Reducing Stations, Surge Relief Stations, High Integrity Pressure Protection Systems, Oil and Gas Modular Skids, Water Injection Skids, E&I Skids, Metering Skids, Methanol Injection skids, CI Skids etc.
Responsibilities
Responsible for complete technical and commercial aspects, Project control, monitoring and supervision.
Manage Multidiscipline Engineers like Structural, Piping, Mechanical, Electrical, Instrumentation, Control Systems and Process.
Responsible for Engineering Design, Procurement, Manufacturing, Testing, Construction, Pre-commissioning, Commissioning, Function Test, Start up and Handover.
Project Management, Engineering Management.
Coordinate and project interfacing with clients, vendors, contractors.
Participate in FAT for various vendors like YOKOGAWA RTU / ESD systems, Cameron Gate Valves, MOKVELD Choke Valves, ITAG scrapper Ball valves, Proserve Wellhead Control Panels, Pietro Fiorentini MPFM and Rawabi Switch Racks.
Responsible for the Project Schedule, Scope monitoring / Control and Manpower utilization.
Technical Data base, International Standards, CAD templates, 3D Model templates, Documentation numbering system, Deliverable register and all deliverable templates.
Deliverables issued: Project Execution Procedure (details the procedure from Project Kick off till Project Delivery), Design and Development Procedure and Flow charts.
Client : ADNOC Refining (TAKREER)
Projects
CBDC (Carbon Black / Delayed Coker Project) for TAKREER Ruwais - PMC
Responsibilities
Responsible for all Instrumentation, Telecommunication, Electrical, Control Systems, Cyber Security, Fire & Gas related activities of the project which includes Engineering Design, Testing, Construction, Pre-commissioning, Commissioning, Function Test, Start up and Handover.
Responsible for Electrical activities related to UPS design, Substation Energization, IRP design etc.
Manage FAT/IFAT activities in YOKOGAWA Musaffah, Abu Dhabi
Responsible for SIT, SAT of DCS, ESD, GDS, BMS, MMS, CCS, ENWS and all third party system.
Responsible for the Project Schedule / Scope monitoring and Control.
Responsible for Engineering Deliverables like Control Narrative (Delayed Cocker, Carbon Black, Hydrogen, SHT, DHT, Sulfur, Utilities etc), Instrument Index, I/O list, Data sheets, Specifications, FDS, DDS, System Architecture, P&ID, C&E, Logic Diagrams, Cable Block Diagrams etc.
Responsible for Cyber Security Design, FAT, SIT, Installation, commissioning and handover.
Responsible for OTS, OMAS, LIMS, PEMS etc.
Client : ADNOC Gas Processing (GASCO), ARAMCO, SHELL
Projects
Turbine Control System Upgrade for GASCO ASAB - FEED
Turbine Control System Upgrade for GASCO BUHASA - FEED
ESD System Replacement Project for GASCO Habshan- EPCC
Turbine Control System Upgrade Mark V to Mark Vie-GASCO Habshan- EPCC
Saudi Aramco Upgrade Control System at Safaniyah- Proposal Engineering
Feasibility study for Qatar Shell GTL-UTL Hypo 0.8%, 12%
Responsibilities
To Lead Design Engineers, Transfer Engineers, Commissioning Engineers & Construction Engineers. Conduct performance evaluation of Discipline Engineers.
Provide total Project Design and Control from service award to completion of EPC contract
Coordination with Client (GASCO), Vendors (ABB-DCS, Yokogawa & ICS Triplex-ESD, Emerson-PVST & Field Instruments, Bentley Nevada-MMS etc.) and subcontractor-EMCO.
Responsible for complete technical and commercial aspects, Project control, Monitoring and Supervision.
Active participation in HAZOP, HAZID, SIL, Logic validation, IFAT, ISAT, Commissioning, Start-up and Unit Handover.
Preparation of Control Narrative for Turbo Expander, Glycol Reboiler, Ammine Recirculation Pump and for each unit of GASCO plant, Control System Specifications, I/O list, Cause & Effect, P&ID, Loop Diagram, Control System architecture etc.
Client : QP, Qatar Gas, Ras Gas, SHELL, OXY
Projects :
Shell GTL Kero Blending Project: Control system interface agreement between RLTO (QG, RASGAS) and SHELL. Successfully done the presentation for interface agreement in meeting with Qatar Gas, Ras Gas, RLTO & SHELL and got the approval for proposed scheme for DCS (FOXBORO) & ESD (Triconex) interface. Produced the reservation drawings, system scope of work, C&E, I/O list etc.
MFP (Minimum Facility Platform- South dome, OXY, Offshore): Produced the detail engineering deliverables like RTU Bitmap schedule, I/O list etc. Issued specification for RTU, MPFM, DHG etc. Prepared the Electrical interface drawing for VSD, ESP and F&G trip.
Instrument Air Upgrade detail engineering (OXY offshore, PS1E & PS1K): Interface with SSUP (Safety System Upgrade Project) team for DCS and ESD interfaces and utilisation of new G-node DCS.
Responsibilities
To deliver work pack of various projects for OXY. Review & Approval of Work pack. To Lead Engineers & designers. To prepare CTR. To Co-ordinate with Client, Offshore Automation Engineers, System Vendors and subcontractors. Offshore site survey.
Client : QP, Qatar Gas, Dolphin, BAPCO
Projects :
Dolphin Tie-in to Common Sulphur Project: Client- Dolphin Energy Ltd, Qatar
Common Condensate Single Point Mooring Project: Client- Qatar Gas
Common Sulphur Project: Client- Qatar Gas
BAPCO project: Client- BAPCO Bahrain
Responsibilities
To lead design of all necessary Instrumentation equipment/facilities for adding second molten sulphur storage tank on dedicated location next the first tank. To size, specify and procure all instrumentation materials for a new SEEHT pipeline (above ground) between the new transfer pumps and the new tie-in points to the two 12-inch CSP liquid sulphur gathering lines at the South other side of Hamad Street. To supervise discipline engineers to work with Smart Plant Instrumentation-INtools & AutoCAD software’s. To participate in HAZOP and SIL analysis. To deliver Instrumentation Documents & Drawings like Instrument data sheet, Instrument Index, Control Valve sizing, Cause and Effect Diagram, Logic Diagram, Loop Diagram, DCS Control System Standard, PLC Control System Standards, I & C Design Criteria, Control System Architecture. To supervise discipline engineers to meet the Schedule & Deliverable tracking
Client : ADNOC Gas Processing (GASCO)
Projects Done :
Yokogawa DCS (Distributed Control System) Workstation and GPC (General Purpose Console) replacement from old Main Control Room to the new Main Control Room for Storage and Loading, Utility, SRU(Sulphur Recovery Unit) and Train3. Preparation of Design Pack, Engineering, Commissioning and Automation for the same.
Honeywell and Yokogawa ESD (Emergency Shutdown) System Interconnection from ITR (Instrument Technical Room) to the new ESD system in FAR-6 (Field Auxiliary Room-6). Preparation of Design Pack, Engineering, Commissioning and Automation for the same.
Jetty Control Room (JCR) and Jetty Fire Fighting Room (JFFR) DCS Workstation and GPC replacement to the new JCR and new JFFR for Berth1, Berth2 and Berth3. Preparation of Design Pack, Engineering, Commissioning and Automation for the same.
Fire & Gas and Mimic Panel (Yokogawa) replacement from Old Main control Room to the new Main Control Room. Preparation of Design Pack, Engineering, Commissioning and Automation for the same.
Responsibilities :
Provide total Project Design and Control from service award to submission.
Coordination with Clients, Vendors, and Contractors like GASCO, Foster Wheeler, Archirodon, CCC, CBI, Yokogawa, Honeywell, Schneider Electric etc.
Responsible for complete technical and commercial aspects, Project control.
Provide resource scheduling.
Site verification and Data gathering surveys.
Implement Company Quality Assurance and Quality Control (QA/QC) program to ensure full adherence to Client standards and specifications.
Preparation of Drawing control sheet, Construction scope of work, Piping Instrument Diagram, Instrument Specification Sheet, Instrument Name and Location, Instrument Point and Lines, Instrument Piping detail, Material take off, Instrument Loop Diagram.
Client : ADNOC Gas Processing (GASCO)
Responsibilities :
S 5 PLC Programming, Installation and commissioning for Plant modification.
S 7 PLC Programming, Installation and Commissioning for the new Plant.
Installation of Siemens Proximity, Photocell, Contactors, I/O card, ELCB, MCB.
Installation and maintenance of the Profibuss, Ethernet cables.
Implementation of Safety factors inside the plant.
Provide PLC training to the technicians in the field and Supervisors.
Configuration of the Frequency converters.
Attend any Electrical or PLC related faults in the Plant.
Client : ARAMCO
Responsibilities :
Responsible for complete technical and commercial aspects, Project control, monitoring and supervision- to the instrumentation projects handled.
Provide resource scheduling
Site verification and Data gathering surveys
Provide total project design and control from service award to submission
Implement company quality assurance and quality control (QA/QC) program to ensure full adherence to client standards and specifications.
Coordinate and project interfacing with clients, vendors, contractors and other concerned disciplines.
Preparation of Drawing control sheet, Construction scope of work, Piping Instrument Diagram, Instrument Specification Sheet, Instrument Name and Location, Instrument Point and Lines, Instrument Piping detail, Material take off, Instrument Loop Diagram.
Responsibilities :
Provide Automation and Commissioning for the Plant which use Bellows, Diaphragms, Position gauge, Conveyors, Thermocouple, Strip chart recorder, Circular chart recorder, Ultrasonic level gauge, Float type level gauge, Flapper nozzle system, Pneumatic cable, Water pressure cutter, Level transmitters, Pressure transmitters, Motors, Contactors, Relays, Temperature transmitters, Mercury gauge in Boilers, Indicators, Control panel, VFD, PLC, Input Output card, Hydraulic Press, Solenoid valve, Directional control valve, Consistency gauge, Viscosity transducers, Accumulators etc.
Implementation of the Weekly, Monthly, Quarterly and Yearly shutdowns.
Provide PLC training to the technicians in the field and supervisors.
Configuration of the Frequency Converters.
Isolation of the shutdown area from other area of the plant for smooth operation.
Instrumentation and Control Engineering