Commissioning Instrumentation Engineer
MS SICIM
Total years of experience :11 years, 11 Months
Managing a team to carry out all the instrument work for the project during the execution of the instrument work of the project to meet the specification, procedure, drawings and Co-ordination with team member to generate the RFI, in different stage of construction activities as approved ITP. Any modifications are required as per site condition and then the issue will be discussed with construction superintendent/supervisor. Installation of control panels in PIBs, (process interface buildings). CCR (Central Control Room) Glanding and termination of multi core instrument power and signal cables, panel wiring, logic testing with pre-commissioning work necessary. Quantifying the field instruments from P&IDs, location of the field instrument was decided with respective of instruments point & lines, instrument hook-up drawing & site condition
West Qurna Phase ii IQ-80 WELL PAD YAMAMA PILOT FACILITY-831, Client : LUK OIL MID EAST LIMITED
Duties and responsibilities
•Preparation for loop folder.
•Preparation for permit in order to attend the job at Yamama 678, 787, 831.
•Trouble shoot for fire and gas instrument IR detector Crowcon and H2S detector Honeywell.
•Troubleshooting for Coriolis FT- Emerson, Ultrasonic FT from GE at flair line and Radar type FT from Honeywell.
•HIPPS valve Loop & function check manufacturer FORAIN S.R.L & Betttis.
•Loop check and cause and effect check for analog and digital signal.
•Loop check & functional check for flare manufacturer ZEECO.
•Loop check & functional check for Safety Shower -AQUA SAFETY SHOWERS.
•Calibration and loop check for MSA detector H2s and combustible detector.
•Loop & Commissioning check MSA Flame detector with test lamp.
•Loop & Commissioning check MSA open path detector with test lamp.
•Loop check and commissioning for manual call point.
•Loop check and commissioning for flow line instrument & close drain vessel like PT, LT, TT.
•Preparation of loop check procedure for F&G and Instrumentation.
•Commissioning test procedure for F&G, INST & ICSS.
•Preparation of ITR B and finalization of ITR Matrix
Reading Specification & Standards, Quality System Documents, Drawings, Site Instructions etc.
•Preparation & Review of As Built Drawings and prepare Ready for Commissioning Packages
•Preparation & Review of Final QC Dossiers for testing, commissioning & handing over.
•Controlling the Monitoring & Measuring Devices of the Projects.
•Make sure that all construction works are done as per the project specification and requirements.
•Incoming material receiving inspections to ensure materials are in compliance with project standards and purchase order and maintaining the appropriate verification records and data sheets.
•Inspection of various equipment’s during receiving Material at store and warehouse
•Leads and supervises an Instrument commissioning team, plans and conducts commissioning activities in the assigned area and coordinates these activities with operation and other commissioning sections efficiently and safely. Supervises the Instrument commissioning team conducting field-commissioning activities for a wide variety of instrumentation and control systems such as field transmitters, control valves, DCS, PLC and ESD systems.
•Plans the work process, review/approves necessary documents such as checklists, and work schedules for total execution of the field instrument commissioning activities.
•Coordinates with other commissioning manager and Systems Engineers in planning and completing commissioning activities. Assure that all components in the loop meet specification & calibration requirement.
•Verify action of Interlocks & supervise simulation operations on the Instruments, correct interventions off alarms.
•Involving in Pre-comm. /Commissioning activities of HVAC Systems
•Verify right operation of loop including fail-safe valve actions.
•Prepares commissioning work reports.
•Involve in pre commissioning and commissioning activities for telecom com system at BAB and HABSHAN Casco plant for Camera, CCTV, Telephone, Radio, PA system and F&G system, Integration with existing DCS Honeywell PKSC200 and yukogawa centum VP
•Review / comparison al connection list, loop diagram, and vendor print for ESD, DCS & F&G system,
•Provide support to construction team for resolving and meeting specification.
•Resolve any discrepancies at site work or office doc.
•Assisting vendor for honey well DCS ESD F& G
•Leads and supervises an Instrument commissioning team, plans and conducts commissioning activities in the assigned area and coordinates these activities with operation and other commissioning sections efficiently and safely.
•Supervises the Instrument commissioning team conducting field-commissioning activities for a wide variety of instrumentation and control systems such as field transmitters, control valves, DCS, PLC
and ESD systems.
•Commissioning the HART and Field Bus Digital Valve Controllers (DVC, FISHER) with Delta V control system and doing Partial Stroke Test for the ESD and BDV valves.
•- Knowledge of HIMA system hard ware, marshalling cabinets, installation and troubleshooting.
•Having experience of HIMA system SAT activities such as checking HIMA system panel, marshaling cabinets etc...
•- Plans the work process, review/approves necessary documents such as checklists, and work schedules for total execution of the field instrument commissioning activities.
• Coordinates with other commissioning engineers and Systems Engineers in planning and completing commissioning activities. Assure that all components in the loop meet specification & calibration requirement.
•Verify action of Interlocks & supervise simulation operations on the Instruments, correct interventions off alarms
Project : Block 15 and Block 17 ( Girrasol & Dallia Brown field)
Duties and responsibilities
•Expertly handled construction activities which includes fabrication of supports and stanchion, installation of control panels, skid frames junction boxes, laying of fiber optic data highway cable, main and secondary cable tray, instrument air supply and instrument Installation as per hook-up drawing, multi cable transit installation.
•Integration of SCADA and PLC system with an existing to new system.
•Modification of existing RTU panel.
•Perform commissioning activates as per client requirement with help of vendor and site team for SAT test.
•Checking the site readiness for vendor mobilisation and de mobilisation.
•Preparing surveillance reports for all kind of instrumentation activities at site.
•All kind of calibrations. \[Transmitters, gauges, control valves, etc.\]
•Work with the hydro-testing of impulse tubing and instrument air-lines.
•Pre-loop checking of all kind of instrument loops.
•NEW JB and lighting installation for extended facilities.
•Lug test for additional light installation
•Follow instruction of Project Manager
•Termination and Mechanical Completion as per the ATEX Standard.. Direct coordinate Engineering, manufacturing, construction, .
•Installation of newTemperature Transmitter, Proximity Sensor/Switch, Vibration sensors,
•various FPSO machinery and equipment, turbochargers, boilers,
•compressors, pneumatic and hydraulic components, deck machinery and related systems to control etc. Able to work independently and as a part of a team
Duties and responsibilities
•Preparation of Project Quality Plans, Request For Inspection (RFI), Inspection & Test Plan (ITP), QA/QC Procedures, QC Plans & Work Instructions and monitor the implementation of the same in line with Quality Policy & Project Specifications.
•Inspection pertaining to Instrument work at appropriate stages of construction process as per the Project Quality Plan and contract requirements.
•Factory acceptance test witnessing & Approvals. ( FAT )
•Preparation of Material approval documents ( MAS) & Approval taking as per contract requirements for all Projects Materials
•Coordinate customer and contractor for inspections and maintain Inspection.
•Control of Specification & Standards, Quality System Documents, Drawings, Site Instructions etc.
•Preparation & Review of As Built Drawings and prepare Ready for Commissioning Packages
•Preparation & Review of Final QC Dossiers for testing, commissioning & handing over.
•Preparation & Review of Construction & Commissioning check sheets (WINPCS).
•Controlling the Monitoring & Measuring Devices of the Projects.
•Make sure that all construction works are done as per the project specification and requirements.
•Incoming material receiving inspections to ensure materials are in compliance with project standards and purchase order and maintaining the appropriate verification records and data sheets.
•Inspection of various equipments during receiving inspection at store and warehouse.
•Witnessing of pre commissioning tests.
•Inspection of completed jobs with client to ensuring quality and conformity to prescribed standards and contractual requirements.
•Preparation of punch list
•Good command over reading and understanding P&IDs, Loop Diagrams, Cable Schedule, Termination Detail, Tray/Trench Layout, Data Sheet, Hook-up and Logic Diagrams.
•Instrument, Impulse line, Cable Laying, Tray, Conduit, JB/Panel Installation as per drawings.
•Walk down for to be ensuring all work is correctly prepared prior to any inspection being undertaken.
•Attending/generating punch points as a part of mechanical completion activities
•Dealing with supervisor to do the work as per drawing and specification.
•Involvement in commissioning for loop check and startup for power project in PDO QAPS PH -3
•Construction and Commissioning experience of BHEL/GE GAS TURBINE (Fr.9E, Fr.5)
•Familiar with DCS/BMS/FCS/ESD/FGS systems such as Yokogawa, Allen Bardley etc.Well experienced in HART & FF Transmitter configuration and calibration like Rosemount, Foxboro, and Honeywell.
•Familiar with Mark VIe GT, HRSG, Boiler, GTP, Polishing Plant, Desalination, BOP Systems.Loop checking, function test, sequence test, interlock and other commissioning activities.
(A leading Epc company)
Qatar gas-2 LNG expansion project, Qatar
Client : Qatar Gas
•Ensure instrumentation work carried out in accordance with company rules, regulations, and standards.
•Planning & Co-ordination of Project Activities Design Verification / Modification, Installation, Calibration, Testing, Loop checking, QA/QC vendors and subcontractors.
•Highlighting material shortage and discrepancies.
•Dealing with supervisor to do the work as per drawing and specification.
•Handling work of instrumentation such as Glanding and termination of multi core instrument power and signal cables, panel wiring, logic testing with pre-commissioning work necessary. Manual Termination of branch cable calibration all types of instrument Pressure, Flow, Temperature, and Level.
•Attending the daily and weekly progress review meeting with consultant, contactors, subcontractor, General const Manager, Area Superintendent, Site Manager and Project Directors etc, update them with the current site status and reports
•Preparation of Non availability of material list for the completion
•Attending/generating punch points as a part of mechanical completion activities
•Review the Project Quality Plans, shop drawings, project standards and engineering specifications to ensure efficient execution of works
A leading Epc company)
Shuibah Mina Refinery
in