Mohammad Reza Ardehi, Precommissioning Manager

Mohammad Reza Ardehi

Precommissioning Manager

Technip

Location
Iran
Education
Bachelor's degree, Electrical
Experience
28 years, 10 months

Share My Profile

Block User


Work Experience

Total years of experience :28 years, 10 months

Precommissioning Manager at Technip
  • Malaysia
  • My current job since April 2017

Pre-commissioning Manager 04/2017 - Current
RAPID iU&I (integrated Utility, interface) Project (JV Fluor Technip)
Area Pre-commmissioning and commissioning Manager RAPID PROJECT (Refinery and Petrochemical Integrated Development) Pengerang Johor
Pre-commissioning work pack creation management
P14 included 19 substations, 275KV/ 33 KV/ 11 KV/ 3.3 KV, ...
Revising all SLD subsystem markup
Optimize and develop system approach
Prepare plan schedule L4 & L5 for all 18 main and unit electrical substations
Prepare plan schedule L4 & L5 for electrical field equipment.
UIO, (utility, interconnection and offsite)
Commissioning procedure generated
Precom & Commissioning Check list and test sheet generated.
Electrical Functional test procedure
Pre-commissioning performance executive monitor
Preparation test sheet and check list for pre-commissioning certificates and dossier.

HUC-E&I Commissioning Lead at Technip
  • Malaysia
  • My current job since March 2015

EPCIC for KANOWIT-PETRONAS Floating Liquid Natural Gas (PFLET) Tie-in Project
Engineering, procurement, construction, onshore testing and pre-commissioning, load-out, sea-fastening, transportation to COMPANY’s designated offshore location, offshore installation, PFLNG Tie-in, hook-up & commissioning, start-up assistance and final documentation of the facilities as specified below. PFLNG Tie-in project will comprise of, Modification works on KAKG-A to cater for additional new facilities.

Lead electrical commissioning engineer at Spie OGS
  • Nigeria
  • January 2014 to January 2015

SPIE OGS., Nigeria EPCI5 OFON2 Project
Transfer ICSS signals from existed package to new system
Commissioning engineering for interface and Tie-in package in OFON old and OFON2
Verification Electrical Functional test
Develop a level 3 Pre-commissioning / Commissioning schedule aligned to system criticality and handover
Operation test procedure for systems and subsystems which included new and existed packages.
Description of interfaces, tuning parameters, representation and description, Control displays and frames, implementation in ICSS of Control logic - as defined on TSLD/F&G, programming.
Creation Technical procedure as regarding to Reliability Centered Maintenance (RCM) and production availability consideration in existed part

Electrical Commissioning Superintendent at SEREPT
  • Tunisia - Sfax
  • August 2013 to December 2013

SEREPT- Tunisia ASHTART Offshore Revamping Project
Commissioning Electrical Superintendent
RFC certificate control (and execution if necessary)
Commissioning of new GTG
Commissioning transformers
Commissioning MV & LV switchboards
Perform Functional Test
Perform Operation test procedure
Commissioning New UPS and DC systems
Preservation maintenance.
SFAX - TUNISIA

Lead commissioning Engineer at PFCE
  • Malaysia
  • July 2012 to July 2013

PFCE, Malaysia BORF Project
Develop of a gas refinery, CENTRIFUGAL COMPRESSOR, Pre-commissioning & Commissioning Plan preparation, Maintenance preservation Plan
Pre-Commissioning and commissioning procedure and specification defined for BORF project
System and subsystem boundary marked up on P&ID and SLD
Status index extracted,
Start-up sequence,
Function Test procedure,
Operation test procedure,
Test packages,
Performance test Procedure
Milestone defined as project strategy.

Head of Electrical at POMC (Petropars Operation Management)
  • Iran
  • September 2010 to October 2011

Oil and Gas, Onshore, Offshore, Electrical, Telecom and HVAC, CMMS software data creation, Phases 6, 7&8 in onshore, ten platform in offshore, train of operators trainee
Oil and Gas, Onshore, Offshore, Electrical, Telecom and HVAC superintendent
CMMS software technical data creation
RCM (Reliability Centered Maintenance)
Shutdown study, shutdown type, Shutdown constraints
Critical assessment, Criticality status (V, C, S)
Preservation plan maintenance PPM
Plan maintenance as agenda accorded the manufactures and plan production procedure.
MAINTA software.

Lead commissioning engineer at MEHRBORNAPETROGAS
  • Iran
  • March 2008 to March 2010

Commissioning Technical procedure creation,
Subsystem boundary
First gas sequence preparation
Marked up SLD, P&ID and PFD
Preparation test sheet and check list for pre-commissioning certificates and dossier.
OPERCOM strategy.
Function Test procedure,
Operation test procedure,
Interface defined between area contractors, disciplines and units as interconnection.

Electrical Commissioning Supervisor & Maintenance engineer at Petro Pars
  • Iran
  • March 2007 to March 2008

Petropars Ltd., Iran
Commissioning supervisor,
Maintenance team leader
Train of operator’s trainee south pars phases 6, 7 & 8, Onshore Petropars Ltd.
Pre-commissioning and commissioning of reception facilities, utility, process units, including 65 units in onshore and SPD 7&8&9 in offshore.
Preservation maintenance.
PTW meeting coordination
Reporting to commissioning manager in daily commissioning meeting every morning.
Support vendor’s specialist on site.

Electrical Construction & Commissioning Supervisor at Eni Iran B.V
  • Iran
  • September 2003 to March 2007

Onshore, offshore, phase 4&5 south pars
Electrical, Construction and Commissioning supervisor onshore
Platforms fabrication yard supervisor of pre-commissioning.
Task risk assessment
Control as subsystem and system status index
Static Tests of equipment « Cold testing »: Pre-commissioning
Check via ICAPS software,
Punch list control,
RFC certificate
Electrical equipment function and operation test
RFCU (ready for startup) certificate creation.
Maintenance preservation
WDN (warranty defected notification) Onshore, offshore.

Electrical Construction & Commissioning Supervisor at POOLAD ENGINEERING CO
  • Iran
  • September 2002 to September 2003

E&I Supervisor, Construction and Commissioning supervisor, achievement control, report to site manager of client, Shipping and Port equipment BIKOT project Mahshahr, Khoozestan, Iran
Poolad consultant engineers co.
Construction and Commissioning supervisor
Project analyzes and control the progress
Report to site manager and client
Shipping Port equipment of BIKOT project
E&I Supervision of consortium consisted of TAIM -TFG & ABB,
Electrical and instrument & control equipment
Ship unloaded, Stacker reclaimed & train loading included,
Three substations for distribution MV and LV in site,
MV electro motors,
Power transformer,
Control panels,
UPS and Battery bank,
Cabling power and control,
Earthing and lightening, lighting, …,
6 km belt conveyer,
Construction & commissioning of all electrical equipment & instrument devices.

Electrical Construction & Commissioning Supervisor at MOSHANIR
  • Iran
  • September 1998 to June 2002

Projects coordinator, Basic design consultant supervision of Executing, of construction, commissioning and start up of E&I, train of operator trainees, hydro power plant EHV substations
MOSHANIR(electrical consultant engineers) official consultant of Iran energy ministry
Conformity check of engineering consultant designed.
Supervision of construction EHV substation
Power plant switchgear 400KV/ 230KV/ 132KV/ 66KV/ 20KV.
Disconnected switch,
Outdoor Circuit breaker, CT, PT, REACTOR, transformers,
Control panels. Protection relays (CBF, distance, directional)
Aluminiume Bas-bar welding inspection
Provided as-built drawings,
Control contractors invoice,
Prepare job description for operator.
Supervision of construction, commissioning and start-up of E&I,
Prepare training course for trainees of client
Train of operator trainees, of hydro power plant EHV substations.
Projects KARKHE, KAROON3, MASJED SOLEYMAN, CHOGHADAK, DIVANDAREH, BOOSHEHRE2)

Electrical Construction & commissioning supervisor, and maintenance at HARD METAL PROJECT
  • Iran
  • May 1995 to August 1998

Electrical supervisor, Maintenance shift Supervisor Hard Metal Project (Toshiba Tungaloy) Iran-Japan
Electrical supervisor
Maintenance shift Supervisor
Hard Metal Project (Toshiba Tungaloy) Iran-Japan,
Installation & startup factory equipment
Machines (spark, wire cut, chamfer, sintering, spray dryer, CVD, PVD).
PPM creation for machines and equipment regarding to plan production and utility.
Utility include,
Boiler, Instrument air and EDG power generation.
Cooperated with R&D (researching and develop),
Prepare production procedure planning,
Criticality assessment

Electrical Construction Supervisor at N.I.P.C (nationally Iran petroleum co.)
  • Iran
  • January 1994 to March 1995

E&I Supervisor of BUTTACOLOR and ALACOLOR petroleum project, NIPC (Nationality Iranian Petroleum Co.)
E&I and telecom supervisor
BUTTACOLOR & ALACOLOR site
Infrastructure facilities power consumer design
Tower Crain panel control
Designed street lighting and lighting of 12000scm included 3 storage product and material
Electrical execution supervision
Temporary power distribution in construction and commissioning during design and supervision
Designed of temporary power distribution panels
Plan producer preparation, procurement
Call of tender Documents control
Contractor invoice control.

Education

Bachelor's degree, Electrical
  • at Technology
  • August 1991

Specialties & Skills

Onshore
Preparation
Commissioning
Welding inspector
Lead commissioning engineer
Electrical superintendent
Electrical supervisor
Maintenance (CMMS)
commissioning superintendent
OPERCOM
Hook up commissioning lead
Operation
Planing
maintenance management
plant maintenance
protection
powerplant
plant commissioning
switchgear
maintenance engineering
project execution
ms project

Social Profiles

Personal Website
Personal Website

URL removed due to policy violation. Please contact support for further information.

Languages

Persian
Expert
English
Expert
Arabic
Beginner

Training and Certifications

AD electrical eng. (Certificate)
Date Attended:
September 1988
Valid Until:
August 1991