Manager of gas plant LPG units and Hot Oil Unit
SONATRACH DOWNSTREAM ACTIVITY/ SKIKDA REFINERY
Total des années d'expérience :16 years, 4 Mois
Process chief engineer:( EDUnit )& reforming units and CRU
Process engineer :for the Technical department in charge for the Reforming unit and LPG units,
I achieved the regeneration of the catalyst with buyer UOP vendor
Process engineer: Paraxyene recovery unit, Xylene Isomerisation orthoxylene & metha xylene
to paraxylene) and Hydrogen purification unit
Process Engineer: Rehabilitation and adaptation project of sonatrach Skikda refinery with
EPC SAMSUNG ENGINEERING, overseas mission in south korea my responsibilities
included engineering details of rehabilitation and adaptation project of skikda refinery.
this mission is included as below: SIL &HAZOP recommendation for all units
IM “instrument modernization” for all units from pneumatics system to DCS system
(YOKOGAWA CS-3000), to make P&ID’s, PFD’s and Datasheet corrections, make comments for units including utilities units
(Boilers, ETP, DM, N2 CRU, CWT)
- Participate in manual operating of all units.
- 3D modeling meetings for units: utilities and offsite units, gas plant units, crude oil units,
Aromatics recovery units.
- Participate in the reception of equipments: vessels, columns, heat exchangers and Chemicals
Catalysts like activate carbon and alumina…..
- Pre-commissioning phase: follow all pre-commissioning procedures like hydrostatic test and
Cleaning part” including air blowing, pig cleaning, leak test…” and to inspect all these parts as
supervisor.
- Commissioning phase: attend units test run and start up, perfomance test.
Attended with PROJETTIITALIA the Pre-test run and Test run of Vacuum unit in
the sonatrach skikda refinery.
I used ULTRASON instrument for measurement of the real parameters like Temperature;
pressure
and viscosity and flow rate also thickness and diameters.
Resolved many problems at the refinery, especially LPG Unit, Cooling Tower; network’s cooling tower, etc.
I followed chemicals analyze for cooling tower’s refinery because it has many problems
With hydrocarbons contamination.
Coordinator and Supervisor : SONATRACH and CPECC
Instructor for new foam station of fire fighting unit was installed by CPECC.
I attended with “WIPCO Company, the subcontractor of Samsung Engineering” the scanning
I Participated as instructor with subcontractor and the vendor's instructor equipment.
Engineer in Chemical Engineering, major: Oil Refining Engineer. Sept 2001 to July 2006, National Hydrocarbon and Chemistry Institute – Boumerdes University ALGERIA CERTIFICATION : ________________________________________ Certified air product nitrogen generator operator : Certificate of completion issued by AIR PRODUCT company, June 2012. Basic operation and maintenance for oxygen analyzers: By EMERSON PROCESS MANGEMENT and ROSEMONT 14th -19th July 2012 Rosemont OX 4000 OCX8800, liquid analyzer, X-Stream Analyzer ANALYTICAL Project Management Primavera Software. Institute: Algerian Petroleum Institute – Algeria- Skikda Clogging of the Heat exchanger equipment : Algerian Petroleum Institute Practical Process Units:Training FERTIAL / Production dept Annaba” (Ammonia and Phosphate Module Plant -Annaba): From: 26/03/2006 to 10/06/2006 Location : Les Salines Annaba –. SAMSUNG Engineering: I attended a training concerning utilities units (boilers and demineralization unit, air compressor). I took part at training in Samsung engineering concerning production units including (Distillation units and LPG units, Aromatics units. GTC Corporation : I attended a training concerning Aromatics units (extractive distillation and cystallisation, isomerisation and converting orto and metha xylene to para xylene Schulumberger Company : Basic mud school Hassi messaoud algeria.MI-SWACO a SCHULUMBERGER Company 2011.