Senior Mechanical Engineer
Pioneer Contracting & Trading Co.
مجموع سنوات الخبرة :14 years, 8 أشهر
2B+G+42 Floors QIIB Tower (Al Dafna)
G+9 Floors Qatar Petroleum Head Quarter Building (Al Dafna)
2B+G+6 Floors Hilton Hotel ( Al Saad)
HVAC, Firefighting, Plumbing and drainage system.
- Preparation of HVAC shop drawings, Material Inquiry, Equipment selections, Material submittals, BOQ (Bill of Quantities), Coiling load calculation, ESP calculation, Pump Head calculation, coordination drawings, air outlet selections, ..etc.
- Reviewed engineering design proposals, design drawings, specifications and recommend improvements.
- Coordinate with consultant on reviews for shop drawings provide solution options.
- Log & post all HVAC changes into field drawings.
- Monitoring installation of HVAC work.
- Air balance and water balance for HVAC system.
- HVAC testing & commissioning.
- Responsible for installation of fire fighting system (sprinkler system, wet riser, fire pump sets, fire safety equipment’s & gas suppression system).
- Familiar with: all the fire protection valves, fire tank sizing & pump testing.
- Review all the Fire fighting design drawings & Shop Drawings.
- Responsible for preparing the project Material inquiry for Fire Fighting System.
- Designed and implemented water supply layouts and schematics for residences and commercial buildings.
- Installed and tested water and sewage lines for residences and commercial buildings.
- Review all the plumbing & drainage design drawings & Shop Drawings.
- Conducted equipment and material testing in compliance with all relevant codes and specifications.
- Fabricated and inspected equipment for functionality and resiliency.
- Monitor & report plumbing & Drainage work progress.
- Calculated, checked and submitted all contractors.
B+G+7 Floors Residential & Hotel building (Palm Jumeirah)
HVAC, Firefighting, Plumbing and drainage system.
- Responsible for installation of fire fighting system (sprinkler system, wet riser, fire pump sets, fire safety equipments & gas suppression system).
- Familiar with: all the fire protection valves, fire tank sizing & pump testing.
- Review all the Fire fighting design drawings & Shop Drawings.
- Responsible for preparing the project Material inquiry.
- Designed and implemented water supply layouts and schematics for residences and commercial buildings.
- Installed and tested water and sewage lines for residences and commercial buildings.
- Review all the plumbing & drainage design drawings & Shop Drawings.
- Conducted equipment and material testing in compliance with all relevant codes and specifications.
- Fabricated and inspected equipment for functionality and resiliency.
- Monitor & report plumbing & Drainage work progress.
- Calculated, checked and submitted all contractors.
- Address problems that might develop, between consultant / HVAC subcontractor.
Coordinate with consultant on reviews for shop drawings provide solution options.
- Log & post all HVAC changes into field drawings.
- Review scope of works for HVAC contractor including budgeting & justification of HVAC change work order.
- Review installation of HVAC work.
- Coordinate & manage HVAC related materials, systems & shop drawings submittals.
- Ensure HVAC Subcontractor adhere with relevant Quality records /regulations including safety.
- Review the minutes of meetings of consultant.
- Monitor & report work progress.
- Review HVAC drawings submission & verify bill of quantities.
- Review contractor monthly progress valuation of HVAC work prior to invoicing.
Al Shekh Tani bin Abd Allah Al Thani Palaces Project (from 02/2015 to 01/08/2015)
Al Shekh Khald bin Tani Al Thani Palaces Project (from 02/2015 to 01/08/2015)
Al Khyreen tower (3B+G+ 14 Floors) (from 02/2015 to 01/08/2015)
HVAC works
- Address problems that might develop, between consultant / subcontractors
Coordinate with consultant on reviews for shop drawings provide solution options.
- Log & post all HVAC changes into field drawings.
- Review scope of works for contractor including budgeting & justification of HVAC change work order.
- Review installation of HVAC work.
- Coordinate & manage HVAC related materials, systems & shop drawings submittals.
- Liaison with consultant, engineers, subcontractors & concerned.
- Ensure HVAC Subcontractors adhere with relevant Quality records /regulations including safety.
- Review the minutes of meetings of consultant.
- Monitor & report work progress.
- Review drawings submission & verify bill of quantities.
- Review contractor monthly progress valuation of HVAC work prior to invoicing.
Al Khyreen tower (3B+G+ 14 Floors) (from 02/2015 to 01/08/2015)
Firefighting systems Works
- Responsible for installation of fire fighting system (sprinkler system, wet riser, fire pump sets, fire safety equipments & gas suppression system).
- Reviewing tender documents and preparing technical bid proposal documentation to ensure all systems and components of the tender are included.
- Familiar with: all the fire protection valves, fire tank sizing & pump testing.
- Review all the design drawings & Shop Drawings.
- Responsible for preparing the project Material inquiry
- Following up with the latest Regulation of NFPA & Qatar civil defence requirements.
- Handing over the project to Qatar Civil Defense department.
Al-Abdul Wahab Gholam tower (2B+G+38 Floors) (from 12/2013 to 01/2015)
Al Shamal Residential Compound & Hotel Project (From 8/2012 to 11/2013)
HVAC, Firefighting, Plumbing and drainage system.
- Address problems that might develop, between consultant / subcontractors
Coordinate with consultant on reviews for shop drawings, MEP related designs, HVAC, Fire Fighting & provide solution options.
- Assist in MEP, HVAC/ Fire Fighting & Plumbing submittals / comments the submittals.
- Log & post all MEP changes into field drawings.
- Review scope of works for contractor including budgeting & justification of MEP change work order.
- Review installation of MEP, HVAC / Firefighting works and Plumbing & drainage works.
- Coordinate & manage MEP related materials, systems & shop drawings submittals.
- Liaison with MEP consultant, engineers, subcontractors & concerned.
- Ensure MEP Subcontractors adhere with relevant Quality records /regulations including safety.
- Review the minutes of meetings of consultant.
- Monitor & report MEP work progress.
- Review drawings submission & verify bill of quantities.
- Review contractor monthly progress valuation of MEP work prior to invoicing.
Al Shamal Residential Compound & Hotel Project (From 8/2012 to 11/2013)
Plumbing & Drainage works
- Designed and implemented water supply layouts and schematics for new residences and commercial buildings.
- Installed and tested water and sewage lines for residences and commercial buildings.
- Review drawings submission & verify bill of quantities
- Review all the design drawings & Shop Drawings.
- Conducted equipment and material testing in compliance with all relevant codes and specifications.
- Performed pump testing at all facility locations.
- Fabricated and inspected equipment for functionality and resiliency.
- Monitor & report plumbing & Drainage work progress.
• Installation and maintenance for lines and machines concerning with glass field.
- Lamination production line (Bentler)
- Double glass production line (Forel)
- Tempering production line (Glassreport)
- Grinding production line (Bentler)
- Cutting production line (Hegla)
- Printing machine (Steinemann)
- Autoclave machine (Scholz)
- Water treatment station (Multi)
• Maintenance for HVAC system and chiller.
• Pneumatic systems, compressors, air lines.
• Workshop works (Design and fabricating) for different application.
• Water treatment works, (RO station).
• Repair and maintenance for Electrical motors, Trouble shooting.
• Preventive maintenance plan for the machines with required timing interval (yearly, half yearly, monthly, weekly and daily)
• Arranging for spare parts and analyzing for life time of old parts.
• Installation for hydraulic systems, pumps and pipes lines (Water, steam, and oil) required for machines installation like MONFORTS Stenter.
• Installation for small chilled water plant.
• Repair and maintenance for steam boiler 8 tons.
• Repair and maintenance for (dyeing, raising, shearing, compactor, dryers) machines.
• Design and carry out for textile utilities machine with all details of requirements.
• Heat transfer application (shell and tube), water treatment station.
• Repair and maintenance for Pneumatic systems, compressors, air lines.
• Repair and maintenance for power transmission systems (gears, belts, power screw, conveyers and gearbox)
• Installation and modification for fans, ducts and using the suitable insulation.
• Installation for MONFORTS STENTER machine.
• Preventive maintenance plan for the machines with required timing interval (yearly, half yearly, monthly, weekly and daily)
• Arranging for spare parts and analyzing for life time of old parts.
Bachelor of Mechanical Engineering.