Sabareesh Muraleedharan Nair, System Assurance Manager

Sabareesh Muraleedharan Nair

System Assurance Manager

RATP Dev - Park Life Metro

Location
Qatar - Doha
Education
Diploma, Diploma in Mechanical Engineering
Experience
16 years, 9 months

Share My Profile

Block User


Work Experience

Total years of experience :16 years, 9 months

System Assurance Manager at RATP Dev - Park Life Metro
  • Australia - Sydney
  • My current job since July 2023
System Manager FM - Metro at RKH Qitarat LLC - Doha Metro & Lusail Tram
  • Qatar - Doha
  • February 2018 to June 2023

Accountable for the Maintenance and Contract Management of FM Hard and BACS Maintenance contracts for Doha Metro and Lusail Tram, for which degree is specifically incorporates:
o HVAC Systems
o Low Voltage Systems
o Tunnel Ventilation Systems - TVS
o Plumbing Systems
o Fire Protection Systems - FPS
o Building Automation and Control Systems - BACS
o Environmental Control Systems - ECS
o CIVL/ARCH / Building Fabric Maintenance

• Ensure contractors maintain a safe system of work and are compliant with safety regulations.
• Analyse gracefully market and best practices in FM Hard and BACS class to challenge the FM and BACS contractors to offer service excellence and improve resource esteem.
• Review and arrange, as and when required, the FM Hard and BACS contracts.
• Contribute to set up the Asset Management Performance, targets and dashboards.
• Analyse the maintenance procedures and the Asset Management System proposed by the FM Hard and BACS subcontractors.
• Set up the procedures and devices with inner partners (Maintenance, Operations and Customer Experience bunches) to screen the work performed by the contractual workers against KPR.
• Ensure that the FM Hard and BACS administrations subcontractors give all necessary documentation (Organisation, Safety, Maintenance plan, Staffing plan, and Training plan) fortuitously and that they hold fast to it.
• Participate to the Metro Service and System Demonstration with a particular spotlight on services delivered by the FM Hard and BACS contractors.
• Finalise the legally binding reports with the contractors (regarding Testing and Commissioning, Trail Running, the Maintenance Management System and Asset Management System, the agreement O&M KPR).
• Arrange explicit gatherings to audit the exhibition of the FM Hard and BACS's subcontractors.
• Liaise with RATP Dev and Keolis specialists to guarantee best practices and developments executed.
• Contribute to the QHSE division in the diverse certification forms (for example ISO 9000, 14000, 55000 or EFQM).
• Ensure Safety/Quality/Environment sway is considered in all exercises under FM and BACS Maintenance Contract

Technical Sales Specialist, UAE, (Lenox Bandsaw) at Stanley Black and Decker
  • United Arab Emirates - Dubai
  • August 2017 to January 2018

Responsible for dealing with the business region and developing the piece of the pie through product testing, product application shows and training workshops in UAE domain.

• Assist existing and new clients in meeting or surpassing their particular business targets by selling and showing Lenox products.
• Support client support, merchants and different divisions in their endeavours to react to the business needs of clients.
• Effectively deal with my region utilizing Salesforce.com Reports, Perspective Reporting, Locator App, Lenox Docs., and Band Saw Blade Estimator to give fundamental information and services to clients and wholesalers.
• Conduct training for wholesalers and their business work force about the Lenox Advantage to assist them with selling Lenox products and administrations utilizing the 'Development by Trial' Guaranteed Trial Order (GTO) model.
• Provide specialized help to merchants, end clients and execute our development by leading 13-point check and Guaranteed Trial Order (GTO) process.
• Train end clients on Band Saw product information, Band Saw cutting edge rudiments, and product exhibits.
• Solve end-client issues through investigating and adjustment of gear, just as product execution and preliminary tests to accomplish ideal product execution.
• Maintain, align and investigate merchant welding hardware.
• Utilize Salesforce.com (SFDC) to gather and keep up information about end clients and dissemination.
• Train end-client work force on the basics of band sawing.
• Coordinate and execute specialized product and application arrangements that stretch out an incentive to Lenox clients, purchasers and agents.

MEPS Engineer at Serco Dubai Metro
  • United Arab Emirates - Dubai
  • April 2009 to August 2017

Joined as MEP Services Technician in Serco Dubai metro and increased enormous hands on understanding on the maintenance of different MEP systems introduced in Serco Dubai metro. Advanced as MEP Services Team leader during the opening of Dubai metro Green line stations. Later advanced as MEPS Engineer in Dubai metro and was liable for taking care of the Competency Management System (CMS), MMS and Trainings of MEPS department.

• Doled out on Secondment with MHI (Mitsubishi Heavy Industries Ltd) for the Testing and
commissioning of Platform Screen Doors (PSD) introduced in Dubai Metro stations.
• Undergone different MEP Technical trainings led by JTMJV consortium and Serco Dubai Metro Training Department.
• Conducted the DLP assessment of MEP assets in Dubai Metro and submitted to Client RTA.
• Plan, Organize and screen all Level (1-5) MEP maintenance exercises inside Dubai metro.
• Ensure that the MEP assets introduced in Dubai metro stations appropriately kept up as per the best practice in a financially savvy and ideal way and operational consistently.
• Lead a group of MEP Team leaders, MEP Technicians and outsourced contractors to attempt all Preventive and Corrective maintenance of MEP assets in Serco Dubai metro.
• Contributed proficiency improvement thoughts in the significant change task of MEP systems in Dubai metro.
• As a Lead Assessor, was liable for checking and improving the competency standards (CMS) of MEPS division by directing the interior examining.
• Directly associated with the Internal just as Client Auditing of MEPS Department.
• Certified Key instructor (Trainer) for leading the Trainings for 150 staffs in MEPS division including the Level 1-5 maintenance Training of PSD and TVS systems.
• PRF champion for MEPS division and the middle purpose of contact in coordination between customer (RTA), Procurement, Logistics and Finance department.
• Responsible for leading the Tender Evaluation of MEP spares in MMS.
• Corrective and Preventive Maintenance completed for the distinctive MEP systems along the Serco Dubai metro stations, Depots, carparks and Tunnel segment. The systems that I had understanding on Incorporates

oHVAC Systems
o Low Voltage Systems
oTunnel Ventilation Systems - TVS
o Plumbing Systems
oFire Protection Systems - FPS
o Platform Screen Door System (PSD)
oEnvironmental Control Systems -ECS
oGenerator / UPS / VHTS/ SC

Service Engineer at Sandvik Asia Ltd.,
  • India - Pune
  • October 2007 to March 2009

Designated as Project Mechatrician, experienced a half year training on electrical, hardware, mechanical, hydraulic and pneumatic systems from Sandvik Training Academy.

• Assigned for the abroad training from Tam rock manufacturing plant in Finland.
• Worked in the R&D project of a pneumatic drill rig named DH150, which is utilized in Surface mines. Had contributed numerous alterations on both electrical and hydraulic circuits dependent on the disappointment happened during site testing.
• Was answerable for the site testing of the DH 150, and led the effective testing of the drill rig in different surface mines all over India.
• Assisted the documentation department really taking shape of O&M manuals for DH150.
• After the fruitful dispatch of DH150 drill rig in both China and India markets, began the creation in Sandvik Pune Plant and was answerable for the production line of DH 150, which include a group of 30 specialists.
• Played a significant job in executing 5 S's of Japanese productivity in the creation plant.
• Assisted the Section Head on the report groundwork for the Production meeting with the Management.
• Deals with the guarantee of spares from sites, distinguished the main driver of issues and made changes as needs be.
• Had done the significant breakdown maintenance of DH150 in different surface mining sites.
• Conducted the training for recently joined learners in Sandvik Training Academy.

Service Engineer at Unicorn Power Solutions
  • India - Bengaluru
  • June 2007 to October 2007

Designated as Service Engineer, gained tremendous experience in the servicing of FG Wilson Generators.
• Received onsite training from the Perkins Engine Service Engineers.
• Hands on experience on the Leroy Somer Alternators for FG Wilson Gensets.
• Sound knowledge in the control panel trouble shooting and maintenance.
• Responsible for the Preventive Maintenance Scheduling and Supervise the Technicians
• Made warranty claims, masterminded the defective spares, and transported for warranty substitution.
• Performed the corrective maintenance in different client sites, guaranteed that the Gensets are under least down time.

Education

Diploma, Diploma in Mechanical Engineering
  • at Carmel Polytechnic College
  • May 2007

Specialties & Skills

Competency Management
Contract Management
Facility Management
AUTOCAD
RAMS Analysis
KPI Calculation
Defect Managment
Competency Mangement

Languages

English
Expert
Hindi
Expert
Malayalam
Expert
Arabic
Beginner

Training and Certifications

RAMS Training for Metro Rail Systems (Training)
Training Institute:
L&T Metro Rail, Hyderabad
Certified Facility Manager (CFM) (Training)
Training Institute:
Texas Management Training Centre
Date Attended:
January 2020
Duration:
40 hours
International Introductory Award in Conflict Handling (Training)
Training Institute:
City and Guilds, London
Date Attended:
September 2017
Slinging Lifting and Rigging Techniques Training (Training)
Training Institute:
Eurolink
Date Attended:
June 2017
Advanced First Aider (Certificate)
Date Attended:
July 2011
Valid Until:
July 2011
Software Application and Computer Hardware (Certificate)
Date Attended:
December 2007
Valid Until:
March 2008
Working at Height including Aluminium Tower Training (Certificate)
Date Attended:
April 2011
Valid Until:
April 2011
Fire Fighting and Safety Protection (Certificate)
Date Attended:
April 2009
Valid Until:
April 2009
Foundation in Mechanical CADD (Certificate)
Date Attended:
May 2007
Valid Until:
June 2007
HVAC systems (Certificate)
Date Attended:
June 2009
Valid Until:
June 2009
IOSH (Certificate)
Date Attended:
April 2009
Valid Until:
April 2009
Diploma in Production Control (Certificate)
Date Attended:
January 2009
Valid Until:
January 2009

Hobbies

  • Drawing
  • Cooking
  • Playing cricket