Total Years of Experience: 26 Years, 0 Months
May 2008
To Present
SENIOR INSTRUMENT TECHNICIAN
at LINDENBERG EMIRATES, LLC
Location :
United Arab Emirates - Abu Dhabi
-Commissioning of Electrical, Electronic control, Instrument and Safety System.
-Ability to read and understand P&IDs, Electrical Schematic, loop drawing and wiring diagrams.
-Installing, maintaining, troubleshooting, repairing and calibrating all instruments.
-Repairing and calibrating all fire and gas system.
-Repairing and maintaining all electronic control systems.
-Regularly inspecting the instrumentation, control system to ensure correct operation of the equipment.
-Ensure all applicable (installations) equipment adheres to intrinsically safe codes of practice.
-Tubing, laddering and cable pulling.
-Installation of all equipment and termination.
-Provide Technical and support to production, research and QC group.
-Testing of all equipment and calibration.
-Skilled in pneumatic, hydraulic and pressure joints and seals connecting process control equipment. -Performed documentation such calibration data encoding, AS-BUILT and revision of loop drawing.
-Responsible also for the training and certification of new technicians and operators.
-Analyzed new equipment and develop preventive maintenance standards and procedure.
-Ability to read and understand P&IDs, Electrical Schematic, loop drawing and wiring diagrams.
-Installing, maintaining, troubleshooting, repairing and calibrating all instruments.
-Repairing and calibrating all fire and gas system.
-Repairing and maintaining all electronic control systems.
-Regularly inspecting the instrumentation, control system to ensure correct operation of the equipment.
-Ensure all applicable (installations) equipment adheres to intrinsically safe codes of practice.
-Tubing, laddering and cable pulling.
-Installation of all equipment and termination.
-Provide Technical and support to production, research and QC group.
-Testing of all equipment and calibration.
-Skilled in pneumatic, hydraulic and pressure joints and seals connecting process control equipment. -Performed documentation such calibration data encoding, AS-BUILT and revision of loop drawing.
-Responsible also for the training and certification of new technicians and operators.
-Analyzed new equipment and develop preventive maintenance standards and procedure.
April 2001
To July 2007
Instrument Technician
at ABV Rock Group K.B.
Location :
Saudi Arabia
-Commissioning of Electrical, Electronic control, Instrument and Safety System.
-Ability to read and understand P&IDs, Electrical Schematic, loop drawing and wiring diagrams.
-Installing, maintaining, troubleshooting, repairing and calibrating all instruments.
-Repairing and calibrating all fire and gas system.
-Repairing and maintaining all electronic control systems.
-Regularly inspecting the instrumentation, control system to ensure correct operation of the equipment.
-Ensure all applicable (installations) equipment adheres to intrinsically safe codes of practice.
-Tubing, laddering and cable pulling.
-Installation of all equipment and termination.
-Provide Technical and support to production, research and QC group.
-Testing of all equipment and calibration.
-Skilled in pneumatic, hydraulic and pressure joints and seals connecting process control equipment. -Performed documentation such calibration data encoding, AS-BUILT and revision of loop drawing.
-Responsible also for the training and certification of new technicians and operators.
-Analyzed new equipment and develop preventive maintenance standards and procedure.
-Ability to read and understand P&IDs, Electrical Schematic, loop drawing and wiring diagrams.
-Installing, maintaining, troubleshooting, repairing and calibrating all instruments.
-Repairing and calibrating all fire and gas system.
-Repairing and maintaining all electronic control systems.
-Regularly inspecting the instrumentation, control system to ensure correct operation of the equipment.
-Ensure all applicable (installations) equipment adheres to intrinsically safe codes of practice.
-Tubing, laddering and cable pulling.
-Installation of all equipment and termination.
-Provide Technical and support to production, research and QC group.
-Testing of all equipment and calibration.
-Skilled in pneumatic, hydraulic and pressure joints and seals connecting process control equipment. -Performed documentation such calibration data encoding, AS-BUILT and revision of loop drawing.
-Responsible also for the training and certification of new technicians and operators.
-Analyzed new equipment and develop preventive maintenance standards and procedure.
July 2000
To July 2001
MAINTENANCE TECHNICIAN
at ATEC AUTOMOTIVE TECHNOLOGY PHILS.
Location :
Philippines
PROCESS SUSTAINING
- Assist in resolving process related issues that would lead to quality problems and production delays.
- Performs daily machine calibration and set-up to ensure good running condition of equipment.
- Performs machine/device conversion and set-up for continuous production operation.
- Keeps an update record on machine history, major repair, and replacement of parts, downtime records and charts for control and references purposes.
- Coordinates with his superior regarding maintenance requirements.
- Conduct preventive maintenance, machine overhauling, and painting and complete machine reconditioning following approved schedule.
- Performs troubleshooting and repair of breakdown equipment, replacement of worn-out parts, refilling and charging of lubricants.
PROCESS DEVELOPMENT
- Assist in setting up, evaluation and implementation of new technologies.
- Assist in evaluation of new products and engineering runs as required by the customer.
- Supports activities or programs related to the overall goals of the engineering group.
- Assist in resolving process related issues that would lead to quality problems and production delays.
- Performs daily machine calibration and set-up to ensure good running condition of equipment.
- Performs machine/device conversion and set-up for continuous production operation.
- Keeps an update record on machine history, major repair, and replacement of parts, downtime records and charts for control and references purposes.
- Coordinates with his superior regarding maintenance requirements.
- Conduct preventive maintenance, machine overhauling, and painting and complete machine reconditioning following approved schedule.
- Performs troubleshooting and repair of breakdown equipment, replacement of worn-out parts, refilling and charging of lubricants.
PROCESS DEVELOPMENT
- Assist in setting up, evaluation and implementation of new technologies.
- Assist in evaluation of new products and engineering runs as required by the customer.
- Supports activities or programs related to the overall goals of the engineering group.
October 1999
To May 2000
INSTRUMENTATION FOREMAN
at AMC INDUSTRIAL CONSTRUCTION COMPANY LTD.
Location :
Saudi Arabia
-Commissioning of Electrical, Electronic control, Instrument and Safety System.
-Ability to read and understand P&IDs, Electrical Schematic, loop drawing and wiring diagrams.
-Installing, maintaining, troubleshooting, repairing and calibrating all instruments.
-Repairing and calibrating all fire and gas system.
-Repairing and maintaining all electronic control systems.
-Regularly inspecting the instrumentation, control system to ensure correct operation of the equipment.
-Ensure all applicable (installations) equipment adheres to intrinsically safe codes of practice.
-Tubing, laddering and cable pulling.
-Installation of all equipment and termination.
-Provide Technical and support to production, research and QC group.
-Testing of all equipment and calibration.
-Skilled in pneumatic, hydraulic and pressure joints and seals connecting process control equipment. -Performed documentation such calibration data encoding, AS-BUILT and revision of loop drawing.
-Responsible also for the training and certification of new technicians and operators.
-Analyzed new equipment and develop preventive maintenance standards and procedure.
-Ability to read and understand P&IDs, Electrical Schematic, loop drawing and wiring diagrams.
-Installing, maintaining, troubleshooting, repairing and calibrating all instruments.
-Repairing and calibrating all fire and gas system.
-Repairing and maintaining all electronic control systems.
-Regularly inspecting the instrumentation, control system to ensure correct operation of the equipment.
-Ensure all applicable (installations) equipment adheres to intrinsically safe codes of practice.
-Tubing, laddering and cable pulling.
-Installation of all equipment and termination.
-Provide Technical and support to production, research and QC group.
-Testing of all equipment and calibration.
-Skilled in pneumatic, hydraulic and pressure joints and seals connecting process control equipment. -Performed documentation such calibration data encoding, AS-BUILT and revision of loop drawing.
-Responsible also for the training and certification of new technicians and operators.
-Analyzed new equipment and develop preventive maintenance standards and procedure.
Share on Facebook
Share on Twitter
Share Via Email