Senior Civil Structural Engineer
Worley Parsons Saudi Arabia
Total years of experience :17 years, 11 Months
Review of structural design of Marafiq Head quarter Building project (Basement+7 Floors) with Pile foundations and its associated facilities.
• Validation of pile capacities and its requirements for various structures based on the geotech reports and recommendations.
• Review and approval of Structural engineering deliverables (Drawings, Calculations, method statements, material submittals, shop drawings, inspection test plan, etc.) submitted by the design consultant and contractor.
• Ensure that the design is in compliance with the Royal Commission/Marafiq Specifications and International standards.
• Analysis and design of pipe rack structure and its foundations.
• Assessment of existing pipe rack and providing recommendations for the strengthening of existing structure to support new piping.
• Experience in Leading FEED studies, Detailed Engineering & Construction support. Good exposure on Saudi Aramco projects.
• Ensure compliance of Quality standards, Worleyparsons systems and procedures, Health, Safety and Environment (HSE) Plans and procedures established for the project.
• Participated in the design/development of multidiscipline deliverables; review of pipe stress analysis report, project schedule, PEP (Project Execution Plan), engineering studies, Isometrics, piping 3D models.
• Design of exchangers, pipe sleepers and pump foundations.
• Preparation of Feed package for the Sabic -United expansion EO/EG project.
• Design of Ladle cleaning machine foundation and its associated works.
• Extension of existing Structural steel shed for the new LCM machine.
• Design and analysis of low level cable rack, tunnel foundations.
• Identify & analyze design changes & modify design drawings & documents.
• Preparation of scope of work for contractors, method of statement, constructability review, etc.
• Interact with the construction manager and the client representatives in all matters related to the civil/structural design and proposed a various alternatives for the safe and economic design.
• Carryout the periodic site inspections for the contractor activities for the construction and testing of piles, concreting works, etc.
• Preparation of weekly reports by highlighting various issues, concerns for the project.
• Technical bid evaluation for the geotechnical and topo survey contractors.
• Preparation of Bill of quantities for structural steel and civil works.
• Design and analysis of pipe rack and its associated foundations, Equipment supporting structure, Heat exchanger foundation, Anchor bolt and Base plate design.
• Design of dyke wall, pump foundations, water stripper foundation, pipe support foundation and structural requirement of project, substation building, transformer foundation and shed.
• Interfacing with the client technical queries and providing feedback as required
• To perform tasks in accordance with procedures and contractual requirements.
• Review and approves Structural engineering deliverables ( Drawings, Calculations, Specifications, method statements, etc.),
• Preparations of scope of work, Geotechnical requirement for the project, Material Take Off(MTO) for concrete and steel structures..
• Preparation of GA drawings, cross sections and connection details (Shear and Moment Connection).
• Identify & analyze design changes & modify design drawings & documents accordingly as per Site requirement.
• Preparation of scope of work, design basis, execution plan and Project Specifications for Underground Cooling water project.,
• Providing the design and support to underground foundations during excavation works.
• Preparation of layout drawings for Structural and Bill of quantities.
• Design & Analysis of Pipe Rack with its connection details and foundations.
• Support structures for above ground piping, cable trays, including underground civil works such as pipe trenches, sumps, basins, and drainage systems.
• Perform structural modifications to facilities such as industrial shop buildings; warehouses and plant facilities.
• Providing technical advice and support on the design, construction and modification of civil and structural components, supports, drains, roads and buildings, vendor identification, and cost estimates.
• Perform engineering analysis and the providing recommendations and alternatives solution of complex problems, related to the plant.
• In addition to project works my responsibility extend to Project Management, Technical leadership and responsible for the design and construction.
• Preparation of tender documents, prequalification criteria and evaluation of bid package. Check, approve and answer all queries from bidders.
• Involves in technical bid evaluation, check/review design calculations of structures submitted by the contractors.
• Project scope development, conceptual planning, estimating, Front End Engineering (FEED) and detailed design for various projects, and project execution.
• Provide technical proposals for Designers (in-house and/or third party engineering firm) during the engineering phase of the projects.
• Monitoring the overall work progress as per target schedule by considering QA/QC, safety
and project standards & specifications.
• Sorting out any technical issues in the form of technical Queries raised from the site for smooth execution of project.
• Preparation of weekly and monthly reports to senior management.
•Analysis & Design of Booster Air Compressor (BAC) & Main Air Compressor (MAC) Noise Hood platform structure.
•Design & Analysis of Pipe Rack-1 & 2 with its connection details and foundations.
•Design of Access platform required for various supporting structures.
•Load calculations & Staad Modelling for Argon & MP/BP Cold Box.
•Design of Raft/Mat foundations.
•Design of Crusher House, Transfer tower structures, Double conveyor galleries, etc
•Design of Underground tunnel, Reclaimer foundations.
•Design of foundations for MAC Discharge silencer, Pumps, Structural supports, etc.
•Design of Elec and Inst Cable rack structure & Electrical 20m high mast foundation.
•Design of Inst Air Compressor Building, DG set, Warehouse & workshop.
•Design of DG set block foundation with Dynamic Analysis.
•Design of foundation for LOX Horizontal Storage tank & LIN Vertical storage tank for LILO India project.
•Design of Liquid Disposal System (Vent Stack, Blower Fan, & Disposal Tank)
•Analysis and design of 2-Legged & 4-Legged Trestles, Transfer tower structures, Crusher House.
•Preparation of technical proposals for various projects and evaluation of technical bids.
•Analysis, Design/Detailing of Pipe Racks of Reboiler pipe rack structure, Condenser Structure in Petrokemya Isopentene Recovery Unit & Acetyl Polishing Unit in Sipchem BDO plant
•Assessed the viability of existing structure for future expansion of condenser structure & recommended necessary strengthening measures.
•Estimation & preparation of Material Take- offs for proposals like KOTC, Sipchem, etc.
•Involved in the design of Al-Murajan/Total upgrade project.
•Design of Foundation and pipe support for the equipment & piping in the Saudi Chevron Phillips.
•Design of underground water tank and pump house as per MODA specifications.
•Design of Firing Control Unit platforms slab and ramps.
•Respond to the technical queries raised by the contractor during construction.
•Design of pipe sleeper and pipe support.
•Design of foundations and sump pits for Process buildings (Heat treat, Hydro NDT & Threading Buildings) Maintenance shop, Warehouse, etc.
•Revision of process building drawings in accordance with the Brandt Engineers (Canada) equipment layout drawings and the same issued to contractor for construction.
•Design of Underground utilities such as Firewater tank (According to NFPA standards), Utility water tank, Septic tank.
•Design of Flare stack foundation for Austinizing and Tempering furnace pits.
•Getting the approval from SCECO for the substation drawings.
•Review & approval of Zamil steel structural drawings
•Visits the construction site to inspect progress and quality of work in accordance to design and schedule. Orders repair or rework, if non-compliance is found.
•Ensure designs are executed in line with International / Company specifications, standards and procedures.
•Ensure that scheduled requirements are always met while at the same time ensuring quality.