Senior Draftsman - Survey Department
Boskalis Westminster Oman LLC
Total des années d'expérience :25 years, 8 Mois
Project: DUQM LIQUID BULK BERTHS (DUQM PORT)
Scope of Work:
The Port works includes a dredged harbor with a depth of typically -18m CD, more than two kilometers of commercial quay wall that can accommodate container vessel up to 400m LOA, almost one kilometers of berths for Government use, a shipyard and dry dock facility that can accommodate vessel up to 500, 000 DWT ballasted, a 4.1km long Main breakwater, a 4.6km Lee breakwater and a 9.5km dredged Port approach channel with a depth of -19m CD.
Responsibilities :
Check Tender Layouts and Cross Sections Drawings.
Create all type of Templates Office Layouts.
Design of Dredging Proposal, Temporary Bund and Wadi Protection Layouts and Typical Cross Sections.
Design of Dry Excavation works plan and Sections.
Update Survey Data, Toe Lines and Contour Lines.
Arrange All Layout Coordinates (UTM40N & WGS84).
Quay Wall Blocks Arrangement and typical sections.
NEW PORT PROJECT (NPP /0013) :
Create New Port in Mesaieed Port Area.
Onshore and Offshore Reclaimation Area, Naval Base Reclamation, Naval Base Basin Dredging, 21km Channel Dredging, Northern and Southern Breakwater Construction, More Bunds, Quay Wall, Concrete Block and Crown Wall works.
Responsibilities :
• Preparation 3D-Design Technical Drawings.
• Preparation and verification of Design Drawings.
• Producing survey drawings and sections from topographic and hydro graphic surveys.
• Technical drawings, design drawings, presentations.
• Prepare base plans incorporating satellite images, bathymetric surveys and topographic surveys.
• Prepare 2-D and 3-D graphics of marine structures.
• Measure material quantities for BOQ’s and find the Area Volume.
• Department all Administration works. (Tide work, All reports, IR, WIR, Manhours, Timesheets, Travel and Leave Request).
Projects
Braka Nuclear Power Plant, DAS Island Extension Harbour, Ghantoot Naval Base, Umm Lafina Island, Abu Dhabi Refining, Eco Island & Nurai Island
Reclaimation and extend existing Horbour. Construction includes dredging, reclamation, ground improvement, revetment (concrete X-blocks and rock), Breakwater, Sheet Piles, Cut off wall and wave wall works.
Projects : 1) North Bahrain New Town, Marsa Al Seef - Bahrain.
2) Palm Deira, DMC Ferry Terminal, Dubai Promenade, Jumeirah Garden City, Port Rachid Quay wall & etc - Dubai.
3) A6-Island, Das Island and Ghantoot Naval Base - Abu Dhabi
4) Abu Dhabi Crude Oil Pipeline (ADCOP) - Fujairah
5) Mussandam Quarry, Sohar Majees & Al Seeb Air Port - Oman
6) New Doha Port & Qatar Petrolem Project - Qatar
Dredging, Reclamation, Break water construction, Quay wall construction, Pipe line works and Marine Works
• Draw and Editing the All typical cross section Drawings.
• Draw Plan and Tender Drawings.
• Prepare different Beach cross section Drawings.
• Preparation of Break Water Cross Sectional Drawings.
• Preparation of Sounding form for survey.
• Preparation of Break Water Rock construction Drawings.
• Draw Excavation Planing, Stages and Steps.
• Find Excavation are and volume.
• Draw the crane, truck and excavator drawings.
• Schematic Sequence of Quay wall Construction
• Create Qual wall Plan, Elevation and side views.
• Arrangement of Blocks and details of Blocks.
• Prepare Dome, Out fall and Quay wall cross sections.
• Create All type of Revetments and Profile.
• Create Pipeline cross section and find the pipeline details.
• Prepare Daily, Weekly and Monthly Progress Drawing and Daily, weekly Dredging and Construction work reports.
• Preparation of as built Drawings of Break Water for the submission to Client.
• Prepare every Islands Area, Volum calculation and Detail Drawings.
• Prepare Drawing / Document Transmittals
• Transmittal Follow up and Submit to Client.
• Prepare and Follow the Drawing Register.
Project: Dubai Maritime City Break Waters (Phase-1)
Construction of Break Waters for Dubai Maritime City at Port Rashid, Dubai.
• Draw and Editing the All section Drawings. (Stabits, Armour, Quarry Run, Filter etc...).
• Draw Plan and Tender Drawings.
• Draw shop Drawings.
• Preparation of Break Water Sectional Drawings.
• Preparation of Sounding form for survey.
• Preparation of Break Water Transition Drawings.
• Prepare Daily, Weekly and Monthly Progress Chart (Drawing) of Construction.
• Preparation of as built Drawings of Break Water for the submission to Client.
• Prepare Drawing / Document Transmittals
• Transmittal Follow up and Submit to Client.
• Prepare and Follow the Drawing Register.
Project : TOM QUARRY
• Draw Road Plan and Tender Drawings.
• Draw Daily Drilling Hole Drawings.
• Preparation of Drilling Hole Coordinates Drawings.
• Preparation of Drilling Points for survey.
• Preparation of Blasting Area Drawings.
• Prepare Daily, Weekly and Monthly Drilling and Blasting Chart.
• Preparation of Blasting Volume Drawing for the submission to Client.
• Prepare Rock Quality Test Reports and Submit to Client.
• Prepare and Follow the QA / QC -Documents .
• Prepare Drawing / Document Transmittals
• Transmittal Follow up and Submit to Client.
• Draw and Editing the Building & Machine Drawings.
• Draw the Gears and Transmission Drawings
• Create 3D Building and Machine Drawings
• Teach all AutoCad Commands to the Students
• Contact All Building and Industrial Drawings
• Draw the New Plan and Elevation Drawings.
• Draw shop Drawings.
• Preparation of Pipe line Drawings.
• Preparation of Electrical layout and Power Drawings.
• Preparation of As Built Drawing for submission to Client.