Abhishek kumar singh Abhi

PROJECT: JAZAN REFINERY & TERMINAL PROJECT ( SAUDI ARAMCO

 Preparation of SAT Procedure & Equipment Energisatation Package according to Aramco Standard.
 Making work schedule of SAT & commissioning activities.
 Coordinating with the Client (PMT, PID & POD) For commissioning Schedule & activites
 Testing & commissioning of the Electric Heat Exchanger Thyristor Step Control Based Heater7288.6 KW(4X1822.15 KW) chroamlox make.
 Testing & commissioning of the Electric Heat Exchanger Thyristor Step Control Based Heater2574.88 KW chroamlox make.
 Done Testing & commissioning of the -Refinery Pilot Gas Vaprozier-& Refinery Fuel Gas Superheater.
 Performing Testing & commissioning of Transformer, MV Switchgear, MV MCC, LV Switchgear , MCC, LDB & transformer.
 Testing of CT, PT, Breaker, IR, HI pot test, Loop Test & Functional check.
 Inter Trip & interlock test of transformer, HV switchgear r& LV switchgear.
 Commissioning of HT Drives & LT drives (Solo Run Test).
 Clearing of Punch Before energisatation & final inspection of the Equipment.
 Making of the Test Report according to the Saudi Aramco Standards.
 Trouble shooting of the problems during fault Occurred & analysis of the fault.
 Making Fault Report & sending to client & coordinating with the Vendor.
 Testing, commissioning of HV, MV & LV Switchgears ( 4.16 KV, 480 Switchboards PCC, MCC & LDB)
 Protection Scheme checking for Transformer Differential, Transformer REF, SEF, & Motor Differential etc.
 Automatic Transfer System Checking of switchgear
 Thorough knowledge in Projects, Trouble shooting, Operation & Maintenance of Electrical equipment’s.
 Ensuring safety norms & safe work practices.

Electrical Commissioning Enineer at Jeddha South Thermal Power Plant, 4*723 MW Saudi Arabia.

Project: 4X723 MW JSTPP (Jeddah South Thermal Power Plant, SEC).Saudi Arabia
Testing & commissioning activities of STG in Thermal Power Plant,


• Testing, Commissioning & Synchronization of 4X891 MVA Generator of MISTUBISHI, Generator Protection Panel (GPP), Generator Control Panel and GCB of ABB. GENERATOR Make: MISTUBISHI ELECTRIC CORPORATION
• Testing, commissioning of All Protection Panel of Generator & its auxiliaries.
• Testing, commissioning of GT (4X906 MVA Hitachi), UAT (4X120 MVA), and CAT (4X70 MVA) and Power Transformers(Oil Type 60 nos ) with auxiliaries panels (CCC, Marshalling, AVR, OLTC & RTCC) of Rating upto 906 MVA.
• Protection & Interlocks checking of 380 KVA GIS, GIB, GPP, GCP, GT, UAT, CAT, ET Relay panels & 13.8kv, 480 V Interlock Checking.
• Testing & Commissioning of Emergency Diesel Generators (3 x 8.7 = 26.1 MW) & auxiliaries. Blackout logic and functional testing.
• Communication & Hardwire logics & interface checking of all Switchgears, Transformers, Protection panels, GCB, GIB & ECMS System (YPP) to DCS (Yokogawa).
• Worked as DCS Operator (Yokogawa based CENTUM Software) for all Electrical Equipment including MV SWGR, LV SWGR, Power Transformers, DC & UPS System, AVR, GCB, GIB and ECMS. Checked and modified logics and graphics.
• Testing, commissioning of HV, MV & LV Switchgears (13.8 KV, 4.16 KV, 480 Switchboards PCC, MCC & LDB)
• Testing, commissioning of HT Motors like, ID, FD, GR, CEP, CWP, BFP Upto 16 MW.
• Protection & Interlocks checking of HT & LT Motors from panel to DCS.
• Testing, commissioning of 220V DCDB and Battery Bank.
• Testing & Commissioning of High Speed Bus Transfer (HSBT)-ABB make.
• Testing & Commissioning of Protection Relays (Numerical, Electromagnetic & Static Protection Relays - GE Relay, Generator Relay, Alstom-MiCom, (MiCom P345, P643, P642, P141 relays) ABB make.
• Protection Scheme checking for Transformer Differential, Transformer REF, SEF, & Motor Differential etc.
• Thorough knowledge in Projects, Trouble shooting, Operation & Maintenance of Electrical equipment’s.
• Ensuring safety norms & safe work practices.

Electrical Maintenance (O&M):

Done CEA certified two weeks Simulator Training for ONM at JIPT, Tamnar, Raigarh.

• Proficient handling Preventive / Predictive / Planned and Break down maintenance/trouble shooting/Drawings modification and implementation of various auxiliaries in BTG, & GRP(GT, ST, UAT, HT Switch Gear and MCC PCC, Circuit Breakers VCB, ACB, SF6, Protection Relays, Control and power circuit, HT & LT motors, Transformer, Generator, CT, PT, Excitation System, NGR, Battery, Charger, UPS.
• Testing and Maintenance of 11 kV HT Switchgear panels (CB and Protection Relay’s), 415 Volts LT Switchgear panels (PCC, MCC) with all protection and interlock scheme.
• Trouble shooting of Fast Changeover Power Supply Scheme in 415 V LT PCC & MCC and in 11kv HT, to enhance reliability of the system.
• Maintenance and Testing of Battery Bank (800AH VRLA type battery), Battery Charger.
• Maintenance and Testing of UPS.
• Analytical and Logical approach towards problem solving for reducing equipment’s downtime to Minimum.
• well versed with Power plant electrical systems & auxiliaries maintenance along with operation aspects of Power plant.
• Electrical scheme design check, rectification and modification as per requirement.
• Materials and Spare management

4 X 360 MW TPP

2 X 660MW & 2 X 300MW TPP

PROFILE SUMMARY:

•Having versatile professional experience of 7 + yrs Installation, Commissioning, Maintenance, Breakdown Analysis, Troubleshooting, Electrical Functions and Safety.
•Having Experience of commissioning of Generator protection, ATS system, synchronization system (including function test, final setting, final trip test, interlock test CT/VT loop check etc.)
•Hand experience of transformer testing, HV switchgear testing(including CT/VT loop check, function test etc. ).
•Making schedule before work start & Test report preparation.
•Maintenance of Electrical equipment & Trouble shooting during problem occurred.
•Performing Testing & Commissioning Activities according to Client ( Saudi Aramco, SEC)
•Closing of punch related to Commissioning & Final walk through Before Energisatation with client
•Hand Experience of commissioning of VSD Of GE Model MV761812P Operation & maintenance.
•Well Knowledge on Maintenance of Generator, Power Transformers, HT & LT Motors (3 Phase Induction) & their protection scheme.
•Having Experience in 400KV GIS Commissioning of ALSTOM & Worked on Hyundai GIS Of 380KV In Current Project.
•Having Experience of Generator & Its Auxiliaries Testing & commissioning (Including CT, PT & protection Relay by using With omicron Test Kit )
•Commissioned Generating Transformer (GT), UAT, and CAT & Other HV Transformer with its protection.
•Done commissioning of HV switchgear of 33KV ABB, 13.8kv, 11kv & LV switchgear.
•Well versed in SF6, Vacuum and ACBs of different ratings (up to 4000amp) with micro-processor based over load, short circuit, earth fault relays and time delays.
•Having experience of GE Relay, ALSTOM, and ABB & Siemens Relay.
•Checking of Interface DI, DO & DCS logic of Electrical & instrument system.

EXTRA ACTIVITES RELATED TO JOB Responsibilities:
•Material requisitions and material take off.
•Knowledge of Lockout & Tag Out, LOTO Permit Reciever
•Cable and lighting calculation notes, cable schedule and power and lighting distributions.
•Consumer list and vendor documents review.
•Knowledge of electrical schematics and Earthing.
•Ensures timely and qualitative preparation of technical specifications and requisitions in coordination with other disciplines.
•Ensures contractual technical specifications are met by the suppliers.
•Ensures proper communication with vendors and technical follow up of the orders.
•Ensures timely reporting on engineering / requisitioning activities to the Lead Discipline Engineer.
•Meets quality and HSE objectives of the project.
•Interfaces with other discipline specialist engineers and possibly project support functions such as procurement and planning