افضال حسين

Design-Civil
Review of Substation and Transmission Line structures with all its components of superstructures & substructures as per applicable
standards viz. ACI, ASCE, UBC & TRANSCO Standards, using latest softwares like E- Tab, STAAD.Pro.v8i, Staad foundation v8i,
SAFE, PLS CADD for reviewing the documents. Coordination with Client, Consultants and Civil Design Agency for approval process.
Coordination for All NOC and ADM Permits to start construction at Site.
N-12733.1- 132/11 kV SS -Khalifa city -Abu
Dhabi
N-15558- 220 kV/33 S/S at Al Towayyah-
Abu Dhabi
N-15200-400 kV Switching S/S at Dhafrah-
Abu Dhabi
Technical & Managerial scope of work:
Finalization of consultants, Vendor and Subcontractor. Finalization of OEL (Overall
Equipment Layout) of substation.
Verification and Evaluation of Design Documents prepared by Civil Design Consultant.
Optimization and finalization after thorough review of all design packages before final
submission to client and consultants.
Verification and review of all materials submitted by vendor and subcontractor prior
to the submission and approval from WSP and TRANSCO Abu Dhabi and Al Ain.
Coordination with Resident Engineer ( Consultants)
Obtain All Required NOC and Permits from Municipal and Concerned Government
Department of UAE
Technical Meeting with Clients and Vendors for Design Calculations and Design
Drawing approvals.
Technical meeting with sub-contractors and consultants to finalize them for order
booking.
Optimization of civil structural quantity during Design Stage to secure quality work.

Design-Civil
Review of Substation and Transmission Line structures with all its components of superstructures & substructures as per applicable
standards viz. ACI, ASCE, UBC & TRANSCO Standards, using latest softwares like STAAD.Pro.v8i, Staad foundation v8i, PLS Tower,
PLS CADD for reviewing the documents. Finalizing the Tender BOQ for Tendering Purpose.
Tender-4- Consists of 5 132/13.8 kV S/S in
central region of Saudi Arabia i.e.
8910- Hail South 132/13.8 kV
8936- Ghazala-2 132/13.8 kV
8938- Al-Azim-2 132/13.8 kV
Rafha-2C- 132/13.8 kV
Al-Jouf-2 33/13.8 kV
Technical & Managerial scope of work:
Finalization of consultants, Vendor and Subcontractor.
Finalization of GEL (General Equipment Layout) of substation.
Verification and Evaluation of Design Documents prepared by Civil Design Consultant.
Optimization and finalization after thorough review of all design packages before final
submission to client and consultants.
Verification and review of all materials submitted by vendor and subcontractor prior
to the submission and approval from NG.
Finalizing Base Design and Detail Design of Civil/Structural Design Documents and
Drawings for Substation Building and outdoor equipment’s.
Technical Meeting with Clients and Vendors for Design Calculations and Design
Drawing approvals.
Technical meeting with sub-contractors and consultants to finalize them for order
booking.
Prepare Technical Proposal to secure turnkey contracts. Preparation the BOQ for
tendering purpose
Prepare Technical Presentation to customers and understand the market requirement
Tender-1- Consists of 4 132/13.8 kV S/S in
central region of Saudi Arabia i.e.
8210- Izdihar-132/13.8 kV
8251- Rabwa-132/13.8 kV

Review of Substation and Transmission Line structures with all its components of superstructures & substructures as per applicable
standards viz. ACI, ASCE, UBC & SEC Standards, using latest softwares like STAAD.Pro.v8i, Staad foundation v8i, PLS Tower, PLS
CADD for reviewing the documents.Preparation of SOW
For Substation, SVC, Transmission Line, HVDC Transmission Line. HVDC Converter Station. Project Management.
Owners Engineering for Central-West ±600
kV (3500 MW) HVDC Interconnection
The Project Consists of 600 kV (3500 MW) HVDC Transmission Line
(800 km), From Jeddah to Riyadh, KSA. Converter Stations at Riyadh and Jeddah.
Study & Review of SEC Standards to Establish and prepare the SOW (PTS) for ±600
kV HVDC OHTL and Converter Station. Preparing Tender Documents for Bidders and
Clarifying the Pre Bid and Post Bid Clarifications.
Responsible for Reviewing of All the Structural Component of Transmission Line viz.
Family of Towers and Converter Station Structure and its Foundations as per SEC
Standards and applicable software’s. Managing the whole project by coordinating all
the contractor, subcontractor and consultant involved in this project During technical
Submission..
Owners Engineering for Madinah, Tabuk
and Aqaba Gulf ±500 kV (3000 MW)
HVDC Interconnection.
The Project Consists of ±500 kV (3000 MW) DC Transmission Line
(850 km), From Aqaba, Tabuk and Madinah KSA. Converter Station at Madinah and
Tabuk, Transition Yard at Aqaba Gulf.
Study & Review of SEC Standards to Establish and prepare the SOW (PTS) for ±500
kV HVDC OHTL and Converter Station.
Preparing Tender Documents for Bidders and Clarifying the Pre Bid and Post Bid
Clarifications.
Responsible for Reviewing of All the Structural Component of Transmission Line and
Converter Station Buildings viz. Family of Towers and Converter Station Structures
and its Foundation, as per SEC Standards and applicable software’s. Managing the
whole project by coordinating all the contractor, subcontractor and consultant
involved in this project During technical Submission.
Owners Engineering Design, Fabrication,
Erection And Testing Of New Family Of
Towers For HVDC Projects.
The Project Consist of Family of Tower ( 6 Towers) as follows:
1- DSH- Suspension Tower for ±600 kV HVDC Line
2- DSL- Suspension Tower for ±500 kV HVDC Line
3- D15- Angle Tower for 0 to 15 degree for both ±500 & ±600 HVDC Line
4- D45- Angle Tower for 0 to 45 degree for both ±500 & ±600 HVDC Line.
5- D90- Angle Tower for 0 to 90 degree for both ±500 & ±600 HVDC Line
6- DE- Dead End Tower for 0 to 45 degree for both ±500 & ±600 HVDC Line
Prepared the Scope of Work for the above Prototype Tower Test Contract.
Reviewed All the Structural Design and Drawings. Software used PLS CADD and PLS
Tower.
The above towers have been already fabricated and tested at Al-Babtain Tower
Testing Station KSA and L&T Tower Testing Station India. The results are very good
Towers have been destructed at around 110%.

Detailed Design of Power Plant, Substations buildings with all its components of superstructures & substructures as per ACI-318,
ASCE, UBC & IS codes.
Deputation Engineer at overseas offices for Middle East Detail Engineering projects.
Ras Al Khair 2400 MW Combined Cycle
Power Plant, Jubail, KSA
Preparation DBR, RFQs, Detailed Design of Plant and Balance of Plant building with all
its components of superstructures & substructures as per ACI-318, ASCE, AISC-360.
UBC codes & Saudi Standards.
Provided detailed drawings and calculation of Gas Turbine Building, Steam Turbine
Building, HRSG, Bypass Stack, CCR, Local Switchgear, Main Pipe Rack etc.
Worked also as design coordinator for this project at Riyadh & Al- Khobar PMO office.
LANCO: 2x660 MW Thermal Power Plant,
Vidarbha Maharashtra India
Provided detail drawings and calculation for all its components of Power Plant
Structures as per Indian Codes. viz Pipe Rack, Wagon Tippler Shed Building, Steam
Turbine Buildings, BOP Buildings.
Al Toukhi :2x50 MW Power Plant Extension
of Wadi Al- Dawaser Open Cycle Power
Plant
Extension of Najran Open Cycle Power
Plant
Extension of Sharourah Open Cycle Power
Plant
Preparation DBR, RFQs, Detailed Design of Plant and Non Plant building with all its
components of superstructures & substructures as per ACI-318, ASCE, UBC codes &
Saudi Electricity Company Standards.
GMR 4 X 350 MW Thermal Power Project.,
Kamalanga, India
\[Lahmeyer International India\]
Worked as owner’s engineer & reviewed detail drawings and calculation with all its
components of superstructures & substructures as per Indian Codes
115 kV Hafer University Substation for SEC
EOA, KSA
Preparation Design Philosophy Detailed Design of superstructures & substructures of
Substation Building as per ACI-318, ASCE, UBC codes & Saudi Electricity Company
Standards
132 kV Muzahmiah Substation for
SEC-COA, KSA
Preparation Design Philosophy Detailed Design of superstructures & substructures of
Substation Building as per ACI-318, ASCE, UBC codes & Saudi Electricity Company
Standards

Designing of structures using latest softwares like STAAD.Pro.2006, ETABS, and manual. Detailed Design of substation building
with all its components of superstructures & substructures as per ACI-318, ASCE, UBC codes & SEC Standards. Finalization of layout
for the whole substation. Analyzing all the necessary Structural and Architectural Drawings for any discrepancies and getting
clarifications wherever necessary before starting the projects. Interacting with Client, Consultants & Subcontractors
regarding issues involving Structural Design, the quality of work and on time of execution.
Reinforcement of North East 43 BD 115/
13.8 kV substation expansion of existing
community power network.
Preparation of Design Philosophy Detailed Design of superstructures & substructures
of Substation Building as per ACI-318, ASCE, UBC codes & Saudi Electricity Company
Standards
Construction of New 132/13.8 kV
Substation # 8906 in Hail. KSA
Preparation of Design Philosophy Detailed Design of superstructures & substructures
of Substation Building as per ACI-318, ASCE, UBC codes & Saudi Electricity Company
Standards
Extension of Existing 132 kV Design calculations and checking of drawings of 132kV GIS building, 13.8 kV
switchgear & control relay building, power transformer foundations/fire wall, station
Substation # 9030, Hail, KSA service transformer foundation,
Reinforcement of North East 19 BD 115/
13.8 kV substation expansion of existing
community power network
Preparation of Design Philosophy, Design calculations and checking of drawings of
115kV GIS building, 13.8 kV switchgear & control relay building
New 69/13.8 kV Az-Zuhoor
Substation, Dammam, KSA
Detailed Design of substation building with all its components 69 kV GIS, power
transformer etc.
New 132/13.8 kV Substation # 8829
KSA
Preparation of Design Philosophy Detailed Design of superstructures & substructures
of Substation Building as per ACI-318, ASCE, UBC codes & Saudi Electricity Company
Standards
New 132/13.8 kV Substation # 8122
KSA
Preparation of Design Philosophy Detailed Design of superstructures & substructures
of Substation Building as per ACI-318, ASCE, UBC codes & Saudi Electricity Company
Standards
New 115/34.5 kV Secondary industries
substation#4, jubail-2, KSA
Preparation of Design Philosophy Detailed Design of superstructures & substructures
of Substation Building as per ACI-318, ASCE, UBC codes & Saudi Electricity Company
Standards
380/115 kV BSP, Al-Dahiya, Saudi Arabia Preparation of Design Philosophy Detailed Design of superstructures & substructures
of Substation Building as per ACI-318, ASCE, UBC codes & Saudi Electricity Company
Standards
Reinforcement of 33/13.8kV Qurrayat West
S/S, Saudi Arabia
Detailed Design of Power Transformer foundations/fire wall, station service
transformer foundation
New Madinah East 380/110 kV BSP
Madinah East. KSA
Detail design of Gas insulated Bus duct foundation as per ACI-318 and ASCE 07, UBC
1997
SWCC (Saline Water Conversion
Corporation), KSA
132/13.8 kV PAS2 substation
132/13.8 kV PAS3 substation
132/13.8 kV PAS4 substation
33/13.8 kV PSR1 substation
33/13.8 kV PSR2 substation
33/13.8 kV PSDJ substation
The whole project consists of 6 substation building and gantry structure.
Third party Review of all the drawings and design calculations.
As per ACI-318, ASCE -7-05, UBC 1997 codes & SEC Standards.

Designing of structures using latest softwares like STAAD.Pro.

Interacting with Architects, Consultants & Subcontractors regarding issues involving Structural Design, the quality of work
and on time execution. Monitoring the quality of raw material used and work procedures to ensure good quality construction as per
the standards. Supervising the construction work at the sites and reporting its progress to the Top Management. Execute Two Blocks
site Activities (Managed 54 Flats work activities) form Excavation to Finishing. Prepare Bar Binding Schedule. Estimation of quantities
of steel and concrete.