أحمد الشامري

Install, start up and commissioning of industrial chargers and UPS solutions in oil& gas (green or brown) filed or any industrial field with different types, capacities and arrangement (single or three phase, dual type or single type), also solve any problem or trouble shooting any problem during operation of chargers and UPS

Install industrial charger’s batteries in oil and gas field (green or brown) or any industrial field, my experience in sizing batteries and choose the suitable type, then erecting battery racks in the required or designed arrangement and connect batteries to charger or UPS and charge/ discharge it in for the purpose of commission it

Installation, pre-commissioning & commissioning of HV&LV switch gear, UPS, HV&LV cable installation& testing in oil & gas field (green or brown) or any industrial field, FOC installation & testing, Pressure gauges calibration/functionality test, PT calibration / functionality test, patch panel installation, metering skid panels installation, VLF AC HIPOT test, CP system installation & testing in oil and gas filed (green or brown) or for any pipeline system

Installation of water treatment compact units and plants and also rehabilitation and installation of sewage treatment stations.

Sizing, load calculations, installing and maintenance and fixing of diesel generators /GENSET.

Design and Installation and maintenance of control panels for different systems, motors and HV&LV switch gears in substations and MCC

QA/QC Coordinator /engineer, preparing all required QA/QC documents for any plane to implement activity starting with writing Inspection Test Plan ( ITP), check list (CHL), issuing a notice for inspection (NOI), supervising the test and fill the test results then then create a dossiers for each system and sub-system to save all these test results, notices, reference documents & drawings, attachments lists of equipment or installations that tested, all prior to hand over. Also closed any Nonconformance reports (NCR) or Site Quality Notice (SQN). Also take action toward any modification to make it match/ compliance with standards and specifications by preparing all the required documents to be submitted for approval depending on the type of the modification discipline. Also prepare any concession request or Technical Query (TQ), follow up any punch list to close all items.

Design, estimation, prepare BOM and follow up contractor during execution

Perform Assessments for design of border fords with all related accessories as border fort
my assignment is regarding all Electrical work design and assessmnet then we as the team of assesment prepare common desgin and drawings and B.O.Q and price assessment
All the assessmnet information done by our team then given to contractors to bid on and to work according to it then.
Drawings done by AutoCad and all design is as per Internationall NEMA or BS standard

Supervising the work of installing 132KV/6.6 KV substation with all accessories and equipments and control & protection panels and make it all according to plane and standards and daily reporting to supervisor.
My job include also make decisions about placing equipments and make calculations and assessments for size and specifications of cables and equipments and electrical fixtures and submit all supports and consultants for the subcontractoras he performing his work and solve all the problems they face and give approval for the materials delivered by subcontractor and give permission for materials to be taken from warehouses of Siemens
The work is in South Rumaila which is south of Basra city, in CPS6, CPS7, CPS8, CPS, 9, CPS10 (CPS means cluster pump sation)which is refer for the Oil electrical network that belong to Electrical company and these pump dtations pumping water to oil wells in wells fields

Responsible for all technical issues/activities (Maintenance and Install and Marketing and pricing offers
Team player
Problem solver
Decision Maker
I

Participates in construction of 70 water treatment plants in the regions of south and middle of Iraq near center
Responsible of 8 Engineers 3 mechanical, 3 civil & 2elec. Our job is construction of 10 water treatment plants the work include civil, mech. & elec.
My accomplishments are install and set the water compact unit and operate it making all the wire connection and power connection and test the controller panels which was PLC and consist of microprocessor controlled board and a software for the hierarchy/sequence of operations of water treatment by compact unite and timing of each operation
And I make all the setting of timing and protections and some of these unites when delivered to sites was not work properly and need to be reprogrammed and some was defected and I take care of all by reprogramming it after we get the software from the PLC's that work properly and download it on the PLC's that need to be programmed and fix the defected ones
Also I found many manufacturing faults/errors that not match our environments or not using unsuitable parts that not compatible with water treatment operation and some operations are done wrongly or redundant and I list all these faults and e-mail it to the manufacturer
I complete the work with in time schedule and according to drawings and standard and safety plan I work in many locations in different governorates, in Najaf, Karbala and in Muthana and here I install units with R.O, also I work in Qadisyah, Basra and here I install all with R.O Unites which is more complicated
The work include using Autocad and many electrical and mechanichel softwars to calculate elctrical&mechanical loads and water flow and so
Also work included using many measuring instruments for commissioning and test purpose for electrical to check motors insulation and R.P.M and vibrations and continuity and and mechnical and chemical to check TDS and turbidity and PH and so

I was team leader engineer
Responsible of 5 engineers, 1 Civil, 2 Mech., 2elec, My duty is was rehabilitation of 20 primary lift station and 6 intermediate low lift sewage stations and one main sewage treatment station in Hamdan industrial district in Basra
My accomplishments in this period is that I make the setting of many ultrasonic level detector used to detect the level of sewage in the main manhole that sewage collected in and according to operate one or two or three submersible pumps, and I programmed this ultrasonic level detector to work properly as per data and assessment I make for each station
Also I make the setting of all the protection relays in the control panel of the submersible pumps and we use float switches for level detection and these send signal to microprocessor controller connected in the control panel of the submersible pumps responsible to run one or two or even three pumps to discharge sewage to main or intermediate station
Also I make the setting of the stand by Generators Perkins Trade Mark; which was set up by LCD screen display to input all data that control the function and the threshold for speed and Temp. of oil and water and coolant system and so
I complete the work with in time schedule with problems and all was as per international standards and safety plan
th work include using many Instruments for commissioning and test and measurments like Insualtion tester and R.P.M laser instrument and network analyser and clamp meter and phase sequence tester and motor rotation teste and so

I was responsible of supervising the work of trench excavation and make it in the right route then placing layer of sand and then placing the cable and bury it with sand to be surround the cable and then back filling with structural materials and make all cable end joint by optic fibers welding and then insulate it to be bury under ground and continue extending the cable.
The work complete with in time schedule and as per standard and safety plan

Project Manger Responsible for all reconstruction and rehabilitation operations in the sweet water canal pump station #1 ( work was very critical since we have to keep pump water to Basra city with enough capacity for people and at the same time we have to keep reconstruction/refurbishing work for pump station
The work include refurbishing 14 electrical Pumps of 270 HP Motors and 4 L.V (i.e. 400 volt) 1.25 MVA generators and 2 H.V (i.e. 11 KV) 1.25 MVA generators and Installation of 14 E-M starter (i.e. Δ-Y starter) for motors and computerized MCC panel with 1600 Amp. manual change over switches used fro exchange between generators, and Installation of 6 incomers 11KV computerized switch gear used to switch between the two H.V stand by Generators and the power utility incomers and I mean by computerize that all protection and status displaying and all operating parameters was PLC type ALSTOM
My assignment was install and set all set points and operate all kinds of control panels for motors and Generators after make all assessment and calculations that I need for set the protection relays inside each panel and I complete the assignment with in the time schedule and with out problems or errors and I enter data for the computerized panels some times manually and other times via a lap top using a specified software CD. Also I accomplish a modification for the protection system for one of generators which was computerized that wasn't work properly due to problem in the software that we couldn't down load or open the system to have it or get it any where because it was old version so I modified the protection system of the generator and I design and install external solid state printed board to function as protection (i.e. high temp., low oil pressure, ..) and it works properly with out any problems .The work was in very dangerous area near Marshes where looters and kidnapping tribes are live
work done with in time schedule and as international standard

Project Manger of 18 Schools and 3 clinics, responsible of all rehabilitation activities which was replastering all walls and then paint it furbishing all windows and install glasses and hand couches for and paint its frame remove all rooms' doors and install new ones also work include install new ceiling fan with two for each room and fluorescent lamps and fix terrazzo tiles or some times Replace it all with new one and refurbish buildings roof Also work include furbishing W.C and install new water pumps and tanks Also work include replace all electrical Fixtures and install new one and I Accomplish work with in time Schedule and according to specifications and safety plan and standard

Design and installation and operating and maintenance a lot of governmental project
Like design and install a stabilized switch mode DC power supply with high technology that installed in a control panel that controls bowler in Al Najibayh power utility
Also reverse engineering for a lot of electronic boards (solid state and computerize) that used in monitoring the operation and send status signals to control room and my work was to rebuilt these boards as PCB and operate it and then install in where it has to be in a certain panel in control room, and that was for Hartha power utility
Also I fix and maintenance and set and reinstall and operate the controller and protector and monitor of 11kV secondary/substation that control the open/close of 11KV C.B and monitor its function and display all corresponding reading and show it on meters and monochrome LCD and control and set and operate all the protection relays, that was in Um Qacer cement milling factory
Also I install and operate Vehicle Electronic Weighing system 2 number and connect it with PC in Um Qacer cement milling factory

Um Qacer Port Communication Engineer Responsible of all communication systems in the port and all electrical operations Installing many communication systems like paging systems Fire alarm systems and fixing electrical cranes and Install and fix many electrical control panels for lighting and for conveyers Installing many cooling systems and their controller and fixing and maintenance cooling systems for offices and buildings and cooling systems of food warehouse

Electrical engineer
Provide electrical support for all projects. installing cement central mixture and asphalt producing factories and stones demolishing/breaking factories and fixing these factories when trouble shooting or defected and apply a periodic maintenance table for

Electrical engineer
Responsible of electrical installations and support in MGO project

Research Engineer responsible of doing a lot of communication researches and repairing many damaged communication systems after war. Repairing all control panels chlorine producing plant fixing the exchange of the ministry of defense and fixing communication radio relay system between Iraq and Jordan and Fixing a CNC machine for Different plants Fixing many control system in Baji Oil plant and improve these systems To be microprocessor controlled or Computerized