أحمد محمود على محمود السيد السيد

 Leads the supplier technical audit process, evaluates supplier performance, and collaborates with other supplier engineers on the supplier audit and evaluation process.
 Reviews the purchase requisition to make sure that all quality and inspection requirements for the purchase materials are included in the requisition.
 Review of Supplier QA system including Quality organization.
 Reviews quality procedures and ITPs submitted by the vendor(s) and ensures that those are in line with the requirements of the project specification and relevant codes and standards.
 Issue the Vendor Shop Inspection Report (VSIR) to the Vendor/Supplier Quality Manager and ensure the comments fulfillment, then issue the final report to the Procurement, Logistics, and Engineering departments.
 Update the VSI plan according to the identified Inspection Milestones submitted by the suppliers.
 Record the Vendor/Supplier qualification by submitting the Subcontractor/Vendor Prequalification Assessment Report.
 Monitors and coordinates witnessed inspection and testing activities and ensure it is effectively and efficiently carried out through the inspection report review.
 Closely monitors and ensures that PQP is effectively implemented. Takes immediate actions to address quality issues.
 Controls non-conformities, conduct root cause analysis and takes remedial actions.
 Coordinates with inspection agencies for the provision of vendor inspectors and their assignments.
 Provides support for any production issues that may occur during the project.
 Issuing lessons learned in the project and performing other work duties which are delegated by managers.

1.1 Project
Project:
NEW CAPITAL POWER PLANT 4800 MW
Site: New Capital City - Egypt
Owner:
Egyptian Electricity Holding Company
Main Contractor: Siemens & ORASCOM

Duties and Responsibilities:
* Monitoring & supervision of all activities Related to Welding, fit-up, and PWHT activities in the site.
* Managing subcontractors and all Inspection Activities related BOP Scope (Balance of Plant) for piping
which connecting between HRSG and steam Turbine According to ASME B31.1. (Module No.3 and
Module No.1).
3
* Managing the qualification of Welder according to ASME IX and Issue Certificates to the welder.
* Review welding requirements and follow up all welding activities in the site.
* Follow up all activities on‐site and ensure that it is carried out according to the established quality
control program, field inspection testing procedure.
* Monitor Post Weld Heat Treatment (PWHT) of alloy material (P92 & P91 & P22 & P11) and review the
completed report.
* Dealing with Various Codes, Standards, and specifications (ASME IX, ASME B31.1).
* Checking the hydrostatic test packages for NDT compliance prior to testing.
* Performing interpretations and evaluation of the results for the following Non‐Destructive Testing:
 Visual Testing.
 Radiographic Testing

1.1 Project
Project:
ELBURULLUS POWER PLANT 4800 MW
Site: Elburullus - Kafr Alshekh City - Egypt
Owner: Egyptian Electricity Holding Company
Main Contractor:
IREM & Siemens & ORASCOM


Duties and Responsibilities:
* Managing Inspection & all Activities of Erection and Testing of Combined Cycle turbine and Exhaust
Bypass System included Diffuser & Expansion Joint & Diverter Casing & Diverter Blade & Exhaust Stack.
* Managing the qualification of Welder according to ASME IX and Issue Certificates to the welder.
* Review welding requirements and follow all welding activities.
* Follow up all activities on site in the line with the established quality control program, field inspection
testing procedure based on the construction schedule.
* Dealing with Various Codes, Standards, and specifications (ASME IX, EN, ISO, and ASTM). Performance,
interpretations, and evaluation of the results for the following Non‐Destructive Testing:
 Visual Testing.
 Radiographic Testing
 Issue NDT Request
* Perform final documentation &check the punch list for the test package.
* Reviewing welding procedure specification "WPS" & Supporting procedure
Qualification record "PQR" and welder performance qualification “WPQR
* Prepare the welding & N.D.T. maps for joints.

Riyadh Strategic Reservoirs Tank capacity 1000, 000 m3
4
( Six Tank each Tank 110 M )
Site: Riyadh City - Saudi
Owner: National Water Company
Main Contractor: Dngo Contracting Saudi Company
Consultant: TYPSA Group
Duties and Responsibilities:
* Inspection & QA/QC Activities of the Fabrication, Erection, and Testing of 6 Storage Tanks.
* Material A 537 Cl 2 & A 573 Gr. 70 & A283 Gr. C - Piping Material X56 according to API 5L.
* Inspection of pipeline and Tank ensuring that all installed pipe/fittings are to the correct specification and
that the material is in accordance with the specified traceability requirement.
* Review welding requirements for field‐erected pipeline and Tanks.
* Implement quality control activities on site in the line with the established quality control program, field
inspection testing procedure based on the construction schedule.
* Ensure that heat treatment, and all non ‐destructive testing is in compliance with the relevant code and
specification.
* Dealing with Various Codes, Standards, and specifications (ASME 9, EN, ISO, ASTM, and API650 and API
1104). Performance, interpretations, and evaluation of the results for the following Non‐Destructive
Testing:
 Visual Testing.
 Radiographic Testing
 Issue NDT Request for sub‐contractor
* Perform final documentation &check punch list for the test package.
* Reviewing welding procedure specification "WPS" & Supporting procedure
Qualification record "PQR" and welder performance qualification “WPQR
* Prepare the welding & N.D.T. maps for Tanks and Piping.
* Raising NCRs (Non-Conformity Report) wherever necessary & ensuring that these are an action taken
towards it.
1.2 Projects:

Project:
Water Treatment Plant 5000 m3

Site: Dammam 3rd Industrial City - Saudi



Owner: Government of Saudi ( Modon )
Main Contractor: Dngo Contracting Saudi Company

Consultant: Hyder Consulting

Duties and Responsibilities:
* Site inspection and co-ordinate to construction to implement work completed in complies with code in
accordance with specification. Coordinate inspections with Consultant / Client and to communicate with
project team.
* Review drawings and applicable documentation of the project.
* Check and inspect all material which supply to site and write MRIR (Material Receiving Inspection Report)
and raising it to consultant.
5
* Inspect rotary and static equipment and issue reports which attach with RFI (Request for Inspection) and
raise it to a consultant.
* Write RFI (Request for Inspection) and raise it to a consultant
* Preparing PQP, ITP, and other QA/QC documents that may be requested by the Project Manager.
* Reviewing welding procedure specification "WPS" & Supporting procedure Qualification record
"PQR" and welder performance qualification “WPQR
* Closing the NCR's in coordination with Management Representative/Quality Manager.
* Prepare the welding & N.D.T. maps for steel structure, plate work and Piping
1- Period From

Responsible for provision all items and material which required.
* Review BOQ of project and specs for issue procurement Plan.
* Select supplier and analyze offers and issue Comparison Sheet.
* Negotiate with suppliers on lead-time, cost and quality so as to obtain the maximum benefit for the
6
company.
* Issue PO (Purchase Order).
* Manage suppliers to meet objectives related to cost, delivery performance, schedule and quality
Monthly project status reports and change orders.