Ahsan Muhammad

• Provided engineering support for electrical capital projects for
switching and substations of voltage class from 69KV - 4.16KV
from conception to successful completion in terms of safety,
reliability, timely completion and within budget and scope.
• Performed power system studies such as load flow, short circuit,
Arc flash, Harmonic, Equipment Evaluation analysis, Sized
Ground grid and Underground cables using SKM, EASYPOWER &
ETAP software.
• Leaded a team of construction crew and subcontractors to put
substation into service by in service date milestone.
• Resolved field issues during construction.
• Attended FAT and prepared ITPs and commissioning procedures
for substation testing.

• Managed the Start-up and commissioning of 13.8KV, 26MW rated
gas turbine.
• Prepared data sheets, single line, schematic, lighting, grounding
drawings and GA layouts
• Engineered, Installed, tested, and commissioned the equipment
such as (35KV - 15KV / 600V) AIS Switchgears, MCCs,
transformers, relays, distribution board & Starters, fire alarm
systems and HVAC for electrical buildings/Substations.

• Prepared scope of work, detailed design, and developed
engineering work packages for Power distribution systems and
products.
• Ensured that electrical and engineering designs are compliant
with code requirements.
• Prepared ITPs and validated the testing/commissioning of
Buildings including equipment, fire alarm and HVAC system.
• Coordinated deliverables, submissions and drawings produced by
the electrical engineering design staff and ensured revisions are
completed accurately and in a timely manner.
• Assisted in the development of electrical design engineering
pursuit and execution budgets to meet project milestones and
deliverables.
• Prepared and delivered quotations in a timely manner.
• Attended site meetings, and meetings with clients to provide
knowledge and solutions to the various challenges involved with
each project.

• Developed scope, schedule budget for 230KV / 13.8KV outdoor
substation and 66KV/12.47KV GIS substation.
• Worked on high voltage substation green field designs and
brown field upgrades/retrofits for utilities.
• Prepared with engineering team connection diagrams and
control schematics for power substation equipment including
circuit breakers, transformers, and capacitor banks.
• Reviewed equipment specification documents for procurement.
• Coordinated internal resources and third parties/vendors for
flawless execution of the bid.
• Ensured bids are delivered on time, within scope and within
budget.
• Ensured the availability of resources.
• Developed a detailed bid plan to monitor and track progress.
• Managed the relationship with client and all stake holders.
• Managed changes to the bid scope, bid schedule and cost using
appropriate verification techniques.
• Created and maintained bid documentation.
• Clarified the technical and commercial discrepancies with the
client.
• Prepared and reviewed technical/commercial aspects of the job,
ensured all services are included in the final price to the
customer.
• Arranged lesson learned meetings with internal teams after
completion of bid.

• Established and maintained plans for the maintenance,
construction, commissioning and startup of plant equipment
such as 13.8KV/600V Switchgears, Generators, Transformers,
Cables, MCCs, VFD/Motors (Ranged from 30KW - 230KW),
Relays, UPS, DC Battery, lighting, communication and grounding
system. Ensured the equipment worked to the specification and
applied the project commissioning plan for the work. Made
improvements to and offered advice about operational
procedures. Developed the electrical team mobilization plan.
Provided support to technicians and wrote technical reports.
• Prepared the operation and maintenance manuals. Made sure
site HSE requirements are met. Interfaced with other disciplines
to ensure integration of activities. Assisted during the database
preparation for pre-commissioning status index and
commissioning technical data base. Attended meetings and
delivered technical solution to the client.
• Implemented proactive and preventive maintenance systems for
plant equipment. Organized spares parts inventory system and
ordered spares for capitals and consumables. Scheduled
manpower for shift manning and general shift jobs. Prepared
monthly energy and root cause analysis report.

• Prepared Inspection test plans (ITPs) and conducted
testing/commissioning of equipment and systems such as
(34.5KV-600V) GIS/AIS switchgears, Transformers, Cables, MCCs,
VFDs, Relays, UPS, DC Battery, lighting, communication, and
grounding. Ensured the performance of all field testing on
Ehouse/VFD house/Pump Station/Substation is completed
accurately and safely. Provided technical instructions, mentoring
and guidance regarding electrical power system to field testing
technicians.
• Ensured compliance of testing QA/QC process. Delivered solution
to the Project Managers to address client needs and provided
cost analysis on test solutions. Regularly met and corresponded
with client to act independently on technical matters related to
testing and commissioning. Maintained relationship with client
personnel.

• Designed, Engineered, Installed, tested, and commissioned the
equipment such as (35KV - 15KV / 600V) arc resistance or non
arc resistance MCCs, AIS/GIS Switchgears, VFDs, transformers,
relays, distribution board & Starters, fire alarm systems and
HVAC. Provided integrated solutions for Electrical buildings (E
houses/ VFD houses), Pump Stations and for (35KV - 15KV /
600V) Substation compromising: MV transformer, MV/ LV
switchgear and disconnect switch. Supervised a group of
engineers / specialists to prepare single lines, General
Arrangements (GAs), cable tray, grounding, schematics, power,
interconnections & lighting layouts
• Inspected the site/fabricator yard to make sure all the installation
is as per approved drawings, specifications, and codes. Installed,
tested, and commissioned the facilities, systems & equipment.
Prepared as built drawings, operation & maintenance manuals.
Witnessed FAT of equipment at factory and site. Recommended
solutions based on interpretation of ETAP and CYME reports.
Prepared data sheets for electrical equipment. Conceptual
drawings and FEED for the projects. Engineering man hours.
Scope of work for new projects. Inspection and test plans (ITPs) &
planned the site and design activities.
• Prepared complex tender documents, review specifications,
customer requirements and support cost calculations & ensured
quality and on time delivery of tenders. Provided technical input
for change orders to management. Presented cases in front of
customer for design change or improvement. Conferred with
other engineers and management as well as contractors,
consultants and distributors. Closely worked with Project
Managers, Sales, Maintenance and Operations.

• Supervised a group of specialists preparing quotations for arc
resistance and non-arc resistance type LV / MV MCCs,
switchgears, switchboards, LV/MV variable frequency drives &
starters. Managed the process of delivering the proposals to the
customer. Coordinated sales strategy, technical design, and legal
input for the submission of bids. Provided technical clarification
to the customers.

• Prepared Bids using Bid Manager Eaton proprietary software.
• Provided technical assistance on all Eaton products to customer
via telephone or emails. Answered technical questions from
OEMs, consultants, distributors, and end users. Obtained
necessary project details required to prepare a quotation, either
from the distributor, end user or consultant. Submitted quotation
requests (c/w necessary RFQ forms) to appropriate Eaton
Electrical Marketing Reps. And/or Plant, complete with take-offs,
drawings, and specifications

• Determined customer requirements and provided specifications/
technical application solutions of control and electrical
equipment; Provided application support on Siemens, Proface
(Xycom), SIXNET, HMS Anybus, Eaton Electric and AC-Tech
equipment; Collaborated with customer engineers to develop
solutions as required. Continuously improved product and
technical application knowledge. Worked cohesively with other
departments (Marketing, Finance, and other business units).

• Interacted with clients and utilized organizational and analytical
skills to handle the upset customers for Rogers. Fulfilled daily,
weekly, and monthly sales quota while functioning as a sales
representative. Consistently met and exceeded sales target,
assured quality services, increased sales, and customer
satisfaction. Provided floor support for training of new
individuals. Verification of sales for new and existing customers.

• Installed, tested, and commissioned high and low voltage
electrical cables, motors, transformers, breakers, Mccs, relays,
cts& pts, switchgears, lighting, fire alarm, telephone, and public
address systems.
• Performed design calculations for cable sizing, transformers,
circuit breakers, voltage drop and illumination level of
luminaries. Planned and scheduled site work; Prepared design,
shop and as-built drawings for residential, commercial, and
industrial facilities, bill of quantities, bids, estimated the cost of
new projects. Planned and scheduled the site work. Attended
meetings on regular basis with consultants to solve site and
design problems.

• Maintained and trouble-shot motors, transformers, switchgears,
AC/DC drives. Maintained and kept functional 1.1 MW
Cogeneration power plant. Scheduled preventive maintenance.