Albasir Sedik, QA/QC Electrical Engineer

Albasir Sedik

QA/QC Electrical Engineer

Drake and Scull International

Lieu
Arabie Saoudite - Riyad
Éducation
Baccalauréat, Electrical Engineering
Expérience
7 years, 9 Mois

Partager Mon CV

Empêcher usager


Expériences professionnelles

Total des années d'expérience :7 years, 9 Mois

QA/QC Electrical Engineer à Drake and Scull International
  • Arabie Saoudite - Riyad
  • janvier 2013 à janvier 2016

Duties and Responsibilities:
1. To support and promote/champion all QHSE policies and procedures implemented by the company.
2. Preparation of ITPs, Method Statements and O & M Manuals.
3. Participate in the internal audit process as per the plan approved from corporate QHSE department.
4. Interact with the project team in Quality requirements.
5. Coordinate with suppliers/manufacturers for Testing and Commissioning of all electrical equipment/systems (Medium Voltage, Low Voltage, & Low Current System
and PLC/SCADA System) such as Switchgears, Power Transformers, Variable
Frequency Drives, Soft Starters, Pump Sets, CCTV System, Public Address and Voice
Evacuation System, Fire Alarm System, FM 200 Fire Suppression System, Foam
System, Access Control System, Lighting Control System, Gate Barrier System,
Telecommunications System, etc.
6. Maintain all QA and QC documents legible (e.g. complete, updated and approved).
7. Monitor the QA (Quality Assurance) for various activities at site e.g. document
controller, stores, to verify its compliance to the company policies and procedures.
8. Targeting the approval and acceptance for all inspection and testing required from
consultant or third party.
9. Preparation of O & M Manuals in coordination with site management team.

MEP QA/QC Engineer (Electrical) à Al-Rajhi Projects
  • Arabie Saoudite - Riyad
  • décembre 2010 à mai 2012

Project: Information Technology and Communications Complex (ITCC), Riyadh, KSA

Duties and Responsibilites:

1. Perform variety of complex inspection jobs within the discipline. \
2. Provide day to day work directions as required for inspection of new or existing facilities.
3. Ensure work performed conforms to engineering specifications and standards and monitor implementation of project quality control program.
4. Inspect on electrical motors, generators, transformers, switches and other miscellaneous items.
5. Write inspection reports, non-compliance reports.
6. Prepare and maintain inspection reports.
7. Implement QA/QC activities including those of sub-contractors works in accordance with approved QCP /ITPs and Procedures, method statements and other contract documents.
8. Interpret & apply Electrical Engineering schematics, wiring diagrams and associated electrical drawings.
9. Inspect cable tray installation, cable pulling, termination of electrical cables, installation of cable tray, installation of junction boxes, local panels, installation of conduits.
10. Provide sufficient feed back to other QA/QC engineer on the day to day quality issues.

Site Electrical Engineer à Saudi Pan Kingdom (SAPAC)
  • Arabie Saoudite - Hafar al-Batin
  • octobre 2009 à août 2010

Project: Military Housing, King Khalid Military City (KKMC) Under Ministry of Defense and Aviation (MODA), Hafar Al-Batin, KSA

Duties and Responsibilites:

1. Execute the site electrical supervision and provide assistance in achieving the site quality, costs and schedule objectives.
2. Supervise the specific discipline site work in accordance with the project schedules and terms and obligations of the construction contract.
3. Maintain ethical business relations with the representatives of the other disciplines, contractors and supplier.
4. Identify and record any significant non-compliance with stated objectives.
5. Provide all the necessary technical information to ensure that the specific work is executed in accordance with drawings and specifications.
6. Participate in evaluations of technical problems and in determining solutions and as required participate at the commissioning phases of the project.
7. Inspect all works and equipment to ensure they are acceptable.
8. Prepare weekly and monthly inspection report.

Part-Time Faculty Member à Notre Dame University
  • Philippines
  • juillet 2009 à octobre 2009

Teaching electrical engineering subjects.

Full-Time Electrical Engineer à Usman Brothers Contruction and Engineering Company, Inc.
  • Philippines
  • avril 2008 à septembre 2009

Duties and Responsibilites:
1. Perform Electrical Engineering duties.
2. Work with project engineers and construction specialists and oversee projects on site.
3. Coordinates with various division and department personnel, as well as consulting architects/engineers, on work schedules and design inputs required to meet deadlines.
4. Duties will include equipment selection and specification, detail design in collaboration with designers and bid evaluation/vendor document review and approval.
5. Coordinating the specialist electrical engineering and drafting design team.
6. Modifications to Cause and Effect diagrams and Functional definition of required Process Control & Safety systems.
7. Quality Assurance - Responsible for working within the provisions and guidelines of the Quality Assurance system relevant to the Clients’ Projects.
8. Safety - Responsible for personal
safety safe working practices.

M1 – System Engineer à Maguindanao Electric Cooperative, Inc.
  • Philippines
  • août 2009 à août 2009

Duties and Responsibilites:
1. Supervise - Operation & Maintenance @ Area-II, Simuay Sub-Station Tender & System Loss Reduction.
2. Plan and implement preventive maintenance and repair of distribution lines @ Area-II & immediate response for restoration of electric service in case of power failure.

Freelance Electrical Designer à Usman Brothers Contruction and Engineering Company, Inc.
  • Philippines
  • juillet 2007 à mars 2008

Designing basic electrical systems (lighting and power systems).

Éducation

Baccalauréat, Electrical Engineering
  • à Notre Dame University
  • mars 2008

Examinations Passed:  Career Service Subprofessional Examination April 2005 in the Philippines – Exam No. 720136 General Rating: 83.10%  Registered Electrical Engineers (R.E.E.) May 2009 Licensure Examination (5th Placer) in the Philippines General Rating: 84.55% Awards Received:  University Citation Award Given by Notre Dame University, Cotabato City, Philippines June 23, 2009  Certificate of Distinction Award (REE 5th Placer Award) Given by Professional Regulation Commission, Manila, Philippines June 13, 2009  Excellence Performance Award Given by Islamic Development Bank, Jeddah, Kingdom of Saudi Arabia November 09, 2007  Series of 2nd and 3rd Honor Student Awards Given by Notre Dame University, Notre Dame Avenue, Cotabato City, Philippines 2nd Honor – 1st Semester 2007-2008, January 30, 2008 2nd Honor – 2nd Semester 2006-2007, July 11, 2007 2nd Honor – 1st Semester 2006-2007, January 17, 2007 3rd Honor – 2nd Semester 2005-2006, December 15,2006 2nd Honor – 1st Semester 2005-2006, January 24, 2006 3rd Honor – 1st Semester 2004-2005, February 8, 2005 3rd Honor – 1st Semester 2003-2004, January 14, 2004

Specialties & Skills

Inspection
Testing
Electrical
Power Systems
Autodesk Revit Electrical
Computer Troubleshooting
Housewiring
AUTOCAD
Car Driving

Langues

Arabe
Moyen
Filipino
Expert
Anglais
Expert

Adhésions

Institute of Integrated Electrical Engineers of the Philippines, Inc. (IIEE)
  • Member
  • May 2009
Notre Dame University Alumni Association, Inc.
  • Member
  • March 2008
Saudi Council of Engineers
  • Member
  • January 2013

Formation et Diplômes

Motor Controls in Compliance to Philippine Electrical Code-1 (PEC-1) 2009 and Safety Seminar (Certificat)
Date de la formation:
March 2013
Valide jusqu'à:
January 9999
Habtoor-Leighton Group Quality Week 2015 (Certificat)
Date de la formation:
November 2015
Valide jusqu'à:
January 9999
Autocad 2011 (Formation)
Institut de formation:
MAGNACAD Technologies School, Inc.
Date de la formation:
September 2010
Durée:
60 heures
Static VAR Compensation (SVC) by ABB (Certificat)
Date de la formation:
January 2013
Valide jusqu'à:
January 9999
IIEE-CRCSA 17th MIDYEAR CONVENTION (Certificat)
Date de la formation:
June 2015
Valide jusqu'à:
January 9999
IIEE-CRCSA 17th ANNUAL CONVENTION (Certificat)
Date de la formation:
November 2015
Valide jusqu'à:
January 9999
Autodesk Revit Electrical 2011 (Formation)
Institut de formation:
MAGNACAD Technologies School, Inc.
Date de la formation:
October 2010
Durée:
40 heures