Electrical Engineer , PMP®
- DAR International for Engineering Consultancy Company
Total des années d'expérience :15 years, 0 Mois
• Review and check engineering studies, design drawings (IFC), technical submittals, materials submittals & equipment
• Performing detail engineering reviewing through Single Line Drawings, shop drawings, Load schedule, voltage drop calculation, Cable Sizing and selection of Circuit Breakers, Substation, Generators, UPS and checking Final Design
• Review drawings for medical equipment of Hospital for Operation rooms, Examination rooms, laboratories, Imaging areas and related areas as per Health Care Facilities.
• Review the time schedule for the Implementation of Electrical Works in Coordination with other related engineering works (structural, Architecture, Mechanical).
• Supervised and managed testing and commissioning of 16MVA capacity project until handover stage
• Check and maintain Electrical systems (MV & LV) and Low current systems for Hospital Projects as per project specifications and Health care standards.
• Applying accepted principles, codes, and standards for resolving specialty related engineering issues.
• Participating in value engineering workshops with Client /stakeholders and other project staff in order to select best optimized design of electrical system.
• Performing cross verification of designs with BOM and circuit diagrams.
• Conduct Cost Benefit Analysis to evaluate risk reduction measures in coordination with Electrical Contractors and Site Managers
• Review engineering drawings & accordingly propose design modifications to improve consistency within cost & quality norm
• Identify areas of improvement, risks and requirements to define robust systems for electronic department of an organization
• Assist in site execution and QA/QC activities, develop progress reports and submit the same to the Project Manager
• Preparing Site Instructions and NCR for Electrical works based on the quality and Project standards to make sure Contractor follow correct execution of work.
Worked as Electrical Engineer for MOH -Group -1 Hospital Projects (King Salman Hospital and Al-Iman Hospital )
Hands on Experience as an Electrical Engineer in the field of Construction and Involved in Execution of Electrical Systems on site according to Electrical Standards.
-Experience for Working for MOH Group 1 Hospital Projects and Supervising the Electrical Works from Initial Stages
--Involved in Testing and Commissioning of Electrical System for the Executed Projects as Electrical Lead
Prepared, reviewed and take approval on Project related drawings SLD 's , Shop Drawings, Material Submitals, with project specifications and Standards
Ensure Compliance with Main Contractor, Consultant, and Electrical Standards (NEC) and further execute corrective actions as required.
Involved in Installation as per approved Drawings for Transformers, Generators, SMDB's, DB's, LV Panels, Switch gear, Building Wiring, Power Outlets, Lighting System, Street Lights, Duct Banks (LV/LC Cables) and Electrical Infrastructure Works
Involve in Site Execution and QA/QC activities, Preparing Daily and weekly progress reports and submitting to Project Manager.
Detailed Knowledge about Electrical Systems Lighting, Power, and UPS, Cables (LC/LV) and External work.
Familiar with Electrical Codes and Standards.
Hands on Experience on Preparation of Revised BOQ, Estimation and making Variation Orders
Interprets construction drawings and study the contract documents applicable standards or specifications prior to execution of any jobs.
Review and familiarized with construction prior to implementation of the works of the project at site, see to it that the project conforms to the approval plans and specifications.
Involved in Bus Way Installation for the Hospital Projects & attending FAT for LV Panels.
My responsibilities are liaising with the Main Contractor Engineers to clarify their requirements to reach targets with respect to Project standards and QA/QC Standards (Installation, Testing, Commissioning, Supervising, Execution and Checking).
Involve in QA/QC activities, Making FIR's (Field Inspection Request), Preparing MIR (Material Inspection Request) .
Supervision of Installation of all Low Current Systems Such as CCTV, MATV, Telephone and Data system, Clock Public Address Fire Alarm System, Access Control .
Involved in decision making of the installation of Electrical system in the initial stages of Cabling for Low Current Cables and LV Cables for the project.
Preparation of As built drawings, Red Line Markup drawings and documentations for the projects as per the changes made on site and take approval.
Supervising and Monitoring on daily basis all the Electrical Work has been done according to QC standards.
Monitor the Project Progress and all parameters on daily basis and take corrective measures to keep the progress in track & Safety as per standards..
Inspect completed installations and monitoring / observe operations, to ensure conformance to design and equipment specifications and compliance with operational and safety standards and Prepare RFI and take approval of inspection request
Performed construction administration services, including shop drawings, RFIs, and site visits.
Worked on Lighting control systems such Load Controllers, Relay Controllers, Dimmer Controllers, Integration Devices, switches and Panels.
Ensure Testing & Installation of all Low current systems such as CCTV, Access control, Fire alarm system, Clock, MATV, BMS, Public Address System etc..
Managed installation as per CIVIL DEFENSE for Fire alarms, MCP’s, Smoke detectors, Heat detectors & Exit lights and Safety Plans.
-Worked with Ministry of Health Projects in Riyadh for Hospital Projects.
Assist in the implementation of policies in Electrical systems through proper coordination with the different departments concerned.
Resolving the daily problems of the Projects by discussing them with the Sub-Contractors and arranging it with the contractor to solve them.
Defining of external alarms and making sure all alarms are cleared before leaving the site.
Responsible for production of documents in support of the project design, CAD drawings, ensuring drawings comply with client standards,
Verifying completeness and accuracy of drawings and overall quality of CAD documents.
Prepare, requesting RFI and take approval of inspection request
Daily Reporting of Site Status to the concern project Engineer.
Maintaining all the drawings, BOQ and papers related to the projects such as shop drawings, Approval Drawings, Fax letters etc.
Maintained Material Safety Data Sheets (MSDS) on chemicals used in the workplace.
Operational use of materials, tools, and methods used in maintenance of fire alarm system and Occupational hazards and strands safety practices.
Coordinating with other departments such as Architecture and Mechanical for smooth flow of work.
Taking all possible decision on site without any delay in accordance with the standards
Responsible for Planning and scheduling the resources for my Team.
Installing Fire Alarm System and prevention as a substitute for smoke detectors in case of emergency.
Monitoring the work progress and supervision of the overall execution of the Projects
Prepare daily, weekly and monthly reports on project progress and attend weekly review meetings for execution and progress.
Periodically updating drawing status as per site modification to senior Engineer/ Project manager
Material submittals for approval of materials to be executed on site and Maintaining records and drawings for quality and quantity.
Attending meetings, writing reports and giving presentations to managers and clients.
Completed Implant/Practical Training during June 2005 from Idian Telecomm Industry (ITI), Bangalore. Completed training in different areas: “C-DOT, Injection Molding, R&D, PCB, PLC, COIL Winding, Satellite Communication, CDMA, GSM & IT”. Advance Training Course for Optic Fiber Communication (OFC)- From Advance Training Institute, Hyderabad (Jan 2006). Allen Bradely PLC Programming & Application. College Project Work- Face Recognition Method Using Eigen Faces Software used – MATLAB Software. Participated in Entrepreneurship Awareness Camp Organized by Entrepreneurship Development Cell-JNTU, Hyderabad. Participated in Inter School Math Olympiad