Mechanical Engineer
fd consult
مجموع سنوات الخبرة :14 years, 2 أشهر
1.Expertise and involved DC1 and DC 2 approval for GSAS - Green building projects for different rated star projects.
2.Expertise in various GSAS calculator to attain the score of 1, 2, 3 & 4 star rated projects.
3.Check and Review of firefighting and ACMV system at Al Wakrah Stadium project.
4.Involving in design and coordination meeting for Qatar National Museum project.
5.Involved in complete mechanical design package from concept to tender submission of Lusail projects.
6.Involved in complete design of large scale projects in Manateq compound including commercial and residential building.
7.Involved in detailed design of district cooling system for Lusail projects.
8.Involved in preparation for Marafeq submission for Gas and District cooling system.
9.Detailed design and submission for ACMV and Firefighting package for different scale projects as per QCDD &NFPA requirements.
10.Coordination and assisting the team whenever required to comply and suite with standards and regulations.
11.Preparation and modification of as built drawings and calculation for Firefighting services as per the regulation for QNB buildings.
12.Preparation and modification of as built drawings and calculation for ACMV services as per the regulation for QNB buildings.
13.Verifying design drawing to suite for approval before authority submission.
14.Prepare and modify the calculation template for mechanical services.
15.Prepare and attend the technical meeting with Local authorities where required.
16.Prepare the BMS schedule and schematic as per the project requirement.
17.Coordination with supervision and involved in site survey where required
18.Ongoing site survey for QNB buildings.
1.Involved in verification of design data of building mechanical services including equipments & accessories -Underground Green Line Metro, Doha.
2.Coordination with BIM team for clashes free model.
3.Prepare calculation format from excel spread sheet for pressure drop calculation of fans and pump with support of international code & standards.
4.Pump head calculation for various pumps of chilled water, firefighting, water supply & sewage pumps in underground stations & tunnel throughout green line project.
5.Pressure drop calculation of ventilation fan with support of international standards ASHRAE & CIBSE.
6.Involved in verifying & revising duct and pipe sizing of mechanical services with support of sizing tools &standards.
7.Occasionally using ASHREA, BS, NSPC, IPC, NFPA, CIBSE, ASHGAL codes & standards.
8.Attend meeting with design consultant & main contractor.
9.Prepare the technical quires and discussion for the meeting.
10.Coordination with consultant to make better design basis for the fire fighting system in the tunnel & stations.
11.Research and prepare data and make calculation format for all mechanical services using international & local codes and standards.
COORDINATION
1.Involved in prepare scope of mechanical works for initial presentation.
2.Involved in detail study and concept design for MEP services.
3.Preparing electrical load estimation of mechanical equipment.
4.Involved in exact & accurate sizing mechanical requirement like pump rooms, tanks, shafts, ceiling void for the mechanical services with well support of local regulations and rely on international codes and standards.
5.Coordination with coworkers &subordinates to full fill design of all mechanical services from the scratch.
6.Coordination with other discipline like electrical, architectural, structural and fire and safety departments to make clash free and to fulfill good design on final approved drawings.
7.Attending technical / progress review meeting client, contractors & supplier to assure all needs with proper aspect of design to align client satisfactory requirements.
8.Coordinate architecture team to fullfill the requirement.
9.Involved in direct discussion with authority for the approval & to rely on the minimum requirement.
HVAC
1.Detailed preparation of thermal load calculation with support of software HAP 4.5, 4.6 and 4.7 version as per international codes, standards and regulations.
2.Involved in the selection of equipments.
3.Detailed preparation of pump flow and head calculation for chilled water system with support of recommended software, catalogues, fitting loss chart international codes, standards and regulations.
4.Involved in preparation of fresh air & exhaust ventilation calculation as per ASHRAE 62.1 & ASHRAE 90.1 for energy efficient design.
5.Involved in preparation smoke ventilation calculation with support of ASHRAE 92
6.Involved in reviewing of E.S.P calculation for Blower Selection.
7.Involved in detailed preparation of chiller & pump room details.
8.Involved in detail preparation of ACMV package for QCD submission.
9.Good knowledge of CIBSE, BS, ASHREA, ASME, SMACNA, NFPA92 Carrier Chapters & Handbook.
FIRE FIGHTING
1.Identification of type of hazard classification & building type classification to estimate fire water tank capacity .
2.Distribution and sizing of sprinkler as per NFPA 13 & QCD requirement.
3.Involved in detailed drafting & sizing of firefighting system with support of recommended tools.
4.Detailed preparation of pump flow and head calculation for firefighting service with support of Elite software and as per NFPA and civil defense codes, standards and regulations.
5.Involved in detailed preparation of pump room with sectional details to make sure QCD minimum requirement and to in line with NFPA 20 Standards.
6.Prepare the calculation for diesel tank capacity as per NFPA requirement.
7.Good hand on automatic fire suppression system design Example: Aerosol system
8.Involved in detail preparation of firefighting package for QCD submission.
9.Good knowledge of NFPA10, 13, 14, 20, 22, 88A, 101, 130, 5000 Standards & Handbooks.
WATER SUPPLY
1.Involved in detailed drafting and sizing of cold and hot water supply pipe with support of recommended standards & tools.
2.Detailed preparation of pump flow and head calculation for plumbing service with support of recommended software and as per international codes, standards and regulations.
3.Sizing of pipes using Fixture unit method recommend by international standards.
4.Involved in sizing of ground & roof tank as per Kahrama Regulation.
5.Involved in sizing of calorifier, water heater recommended by AHRAE hot water demand table.
6.Involved in Preparation of detailed drawing for Authority submission.
7.Detailed preparation of site setting layout for water supply.
8.Good knowledge of CIBSE, IPC, NSPC &UPC codes & standards.
DRAINAGE
1.Involved in detailed drafting and sizing of sewage pipe with support of recommended standards & tools.
2.Involved in detail preparation of drainage system for Authority submission.
3.Good knowledge of BS, IPC &UPC codes & standards.
1.Detailed preparation of thermal load calculation using different software like HAP 4.5 and 4.7 version.
2.Involved in preparation of equipment schedule for AC system
3.Good knowledge of ASHREA, SMACNA, NAFPA, BS stds & local regulations
4.Involved in Duct, Pipe designing &
5.Involved in preparation of HVAC drawings
6.Involved in reviewing of E.S.P calculation for Blower Selection
7.Involved in reviewing Head calculation for pumps
8.Involved to get DM, JAFZA approval for different Mechanical services.
9.Coordinating Draftsman to full fill design of all mechanical services from the scratch
10.Good command on AutoCAD
11.Prepare the meeting with DM, client& contractor when required.
12.Involved in preparing specification of HVAC equipment including chillers, chilled water pumps, AHUs, FCUs and HRWs.
13.Review the technical submittals for mechanical and plumbing works.
14.Preparation and reviewing of drawings for all mechanical services.
15.Review the design of fit out works.
16.Preparation of weekly and monthly reports to the MEP manger.
17.Site inspection for Mechanical services when required.
18.Prepare and implement inspection and test plan based on project specification, codes and standards.
19.Material inspection and shop drawings reviews submitted by the contractor
20.Commissioning of air conditioning equipment
21.Follow the progress and quality installation at site.
22.Supporting Design team to prepare preliminary designs for HVAC and Plumbing.
23.Attending technical / progress review meeting among Main contractors and MEP contractors.
24.Review and approve shop drawings, builders work submitted by the contractors and give comments and instructions as required.
1.Involved in Heat Load calculation for various commercial, residential, industrial & hospital buildings
2.Involved in chilled water pipe sizing, E.S.P calculation for Blower selection &
3.Equipment selection according to capacity(TR) & by the help of Catalogues
4.Good knowledge of ASHREA std, BS std & local regulations
5.Involved in Duct, Pipe designing & Drafting
6.Involved in preparation of HVAC drawings
7.Prepare air distribution ducting plan and HVAC installation drawings for the development by the draftsman
8.Participate in HVAC commissioning activities, conduct site visit
9.Review project proposal to assure that maintenance aspects are considered in final design
10.Liable for selecting the equipments according to the capacity(TR)
11.Material inspection and shop drawings reviews submitted by the contractor
12.Follow the progress and quality installation at site.
13.Commissioning of air conditioning equipments
14.Prepare and implement inspection and test plan based on project specification, codes and standards.
1, Involved in Heat Load calculation for various commercial, residential, industrial & hospital buildings
2.Involved in chilled water pipe sizing, E.S.P calculation for Blower selection &
3.Equipment selection according to capacity(TR) & by the help of Catalogues
4.Good knowledge of ASHREA std, BS std & local regulations
5.Involved in Duct, Pipe designing & Drafting
6.To select the machine from various present options and measure all HVAC material & prepare the statement of deviation
7.Involved in preparation of HVAC drawings
8.Prepare air distribution ducting plan and HVAC installation drawings for the development by the draftsman
9.Review project proposal to assure that maintenance aspects are considered in final design
10.Supervision of erection work at site when required.
11.Commissioning of air conditioning equipments
i have received certificate from Ishrae, Delhi chapter, for the special participation in variable pumping system
