Construction Superintendent (Civil) – GHE-Area 80 (Marine Jetty Facilities), GHE-Area 90 (Common Bui
Air Products Middle East Industrial Gases LLC – Dhahran, Kingdom of Saudi Arabia
Total years of experience :18 years, 11 Months
NEOM Green Hydrogen Project (NGHP) Complex - Green Hydrogen Elements (GHE) / Ammonia Plants - NEOM Industrial City, Duba, Saudi Arabia.
An equal production joint venture of ACWA Power, Air Products and NEOM incorporated in August 2021, NEOM Green Hydrogen Company (NGHC) is establishing the world’s largest green-hydrogen-based ammonia production facility run on renewable energy. Supporting Saudi Arabia's Vision 2030, this mega-plant will produce up to 600 tonnes of carbon-free hydrogen per day in the form of green-ammonia as a cost-effective solution for transportation globally. The company announced financial close in May 2023 at a total value of 8.4 billion USD investment.
An equal joint venture between NEOM, Air Products and ACWA Power, the project is based on proven, world-class technologies that will include the innovative integration of a combined capacity of around four gigawatts (4 GW) of renewable power from onshore solar, wind and storage.
The NEOM Green Hydrogen Project is the world’s largest utility scale, commercially based hydrogen facility powered entirely by renewable energy.
Responsible and oversee assignments for Marine Facilities - Jetty Terminal (Area 80), Jetty Operator Building, Onshore Control Building were handled the EPC Contractor (Saudi Archirodon) for NEOM Green Hydrogen Project (NHGP) - Green Hydrogen Elements (GHE).
Support supervision in Onshore Common Buildings (Area 90) was handled the EPC Contractor (Nesma United Industries) for the Neom Green Hydrogen Project (NGHP) - Green Hydrogen Elements (GHE).
Support supervision in the Power Transmission Grid System handled by the EPC Contractor (Larsen & Toubro Limited) for the Power Grid Package at the Neom Green Hydrogen Project.
The Scope of works of the Grid Network package includes the Construction of 3 Nos of 380 kV Switching.
Substations and Interconnection transmission system, Statcom, and establishment of EPMS System
for the overall Network as indicated below:
a. 380kV Load Substation at Helios Green Hydrogen Plant.
b. PV Solar Plant 380 kV Switching Substation.
c. Wind Farm 380 kV Switching Substation
d. 380 kV Statcom.
e. 380 kV Transmission Lines (TL) - OHTL Wind farm to Load SS = 132 km, OHTL Solar PV to Load SS = 2 x 79.50 km, and OHTL Neom Industrial Complex (NIC) to Load SS = 14.50 km
Guided the EPC turnkey Contractors / Subcontractor’s Site team to ensure all construction works were executed by the Project and Construction Execution Plans.
Ensure that all supervisions, and related activities including construction planning, scheduling, quality control, and safety. Field and Office Coordination are working closely in all site activities, effective communication with site personnel, and effective conflict resolution with the EPC Contractors.
Ensure that construction EPC contractors working within his discipline adhere strictly to the latest Approved/Issued for Construction (AFC/IFC) drawings, Project Specifications, Inspection & Test Plans (ITP’s), Procedures, and Site / Field Instructions.
Review and monitor the availability of the AFC/IFC’s drawings, specifications, construction-related documents submitted by the EPC contractor, job instructions, and material deliveries.
Overall coordination and cooperation of EPC Contractors / Subcontractors to minimize interface problems.
Reporting to the GHE Senior Construction Manager / PWE Construction Manager / GHE Site Manager, guide the Contractor Site team to ensure all construction works are executed under the EH&S plans, Project specifications, IFC drawings, Quality, Schedule, and Construction Execution Plans.
FGEN LNG Multi-Purpose Jetty (MPJ) and Gas Receiving Facility (GRF) Projects
Scope/project descriptions: Owner's Engineer for the EPC Construction of a liquefied natural gas (LNG) import and regasification terminal in Batangas Province, located within the First Gen Clean Energy Complex adjacent to the Port of Batangas and will supply gas to several First Gen power plants within the complex. The terminal comprises a multi-purpose jetty designed to berth a 175, 000 m3 LNG FSRU and an LNG bulk carrier in parallel. The jetty consists of 176 steel piles 1.5 and 1.6 m in diameter with jackets and topsides for loading and utility platform, berthing and mooring dolphins, LNG loading arms, HP gas pipeline, and all associated safety systems and backup power. The onshore work consists of seismic rated, piled, monitoring and control buildings, gas metering, and a firewater system.
Responsibilities:
Act as an Owner’s engineer/representative supervised, monitored, and verify the EPC Contractor’s Marine-jetty and Onshore construction site activities, and ensured compliance with the IFC/AFC design drawings, Construction scope of works, and contracts, Project specifications, Construction Management Plan, Construction procedures/work method statements (WMS), Inspection & Test Plans (ITP’s), Project Quality Plan (PQP) and Quality Management Systems.
Led the site HSE toolbox meetings before commencing any Marine-Jetty, Civil, Structural, and Building activities.
Supervised, monitored, and verify the Marine EPC contractor’s implementation in scope of works for civil, structural, and marine works for 178 steel piles (O.D 1.6 m & 1.5 m x 67 m maximum length), Pile Dynamic Analyses (PDA) test, Static axial compression load test, Static axial tension load tests, Multi-purpose Jetty platform, Berthing dolphins, Mooring dolphins, Utility platform, Loading platform, Jacket modules, Topside frames, MEP structural supports steel, Catwalks, Trestles, Fender’s installation, Jetty furniture and coating repair / touch-up works as per approved finish coating repair procedures.
Supervised, monitored, and verify the Onshore EPC contractor's implementation in the scope of works for Civil Site Development such as Steel pipe pile driving, Cast-in placed concrete bored piles, Roads, Pipe bridges, Duct banks, Manholes, Tsunami Bund Walls, Flood Walls, Civil works for 24" High-Pressure Gas Pipeline, Tanks Foundation, Gas Metering Skid, MEP Plinth & Structural Steel Structures, Jetty Monitoring Building, and Gas Receiving Facilities Building.
Performed inspection/verification of the construction of EPC Contractor’s Marine - Offshore Concrete, Onshore Concrete Placement, and Grouting works for Civil site development, MEP foundation, Structural steel, Building and verified the quality assurance & quality control documentation, RFI close-out, on-situ site progress and identification of potential problems and delays and suggested remedial actions.
Attended and witnessed the Civil laboratory testing per the Project specification and Inspection & Test Plan (ITP).
Monitor and take actions, and steps and give instructions necessary to the EPC Contractor to comply with HSSE Plan.
Issuance and close-out of Safety Observation Reports (SOR).
Attended site meetings and assisted the Project Manager in resolving stakeholders' concerns and site issues (e.g., safety, quality, schedule, site activities, etc.)
Prepared and submitted a daily diary to the Project Manager and maintained records of construction EPC contractor’s site activities in terms of progress, safety, quality, schedule, areas of concern, and other site issues.
Safaniyah, Tanajib, and Manifa Gas & Oil Separation Plant (GOSP) Facilities Projects
Upgrade Pier Facilities at Tanajib Marine Facilities (BI-10-1321)
Berth 16 to Berth 24 New Pier Facilities (Phase-1).
Quay Wall, Sheet Piling, Dredging, Soil improvement activities, and Pollution Ramp.
Utilities, MCC & Utility Buildings, Security Fence, Roads, and Diesel Tanks.
Upgrade Desalination Plant Project (BI-10-1579)
Construction on 3 Units of New Water Tanks, Rough Filters, Fine Filters, Upgrade RO Building,
Operators Building and Utility Pipe racks.
Safaniyah Ten Slipover Platform, Cables, and Electrical Distribution Platform (BI-10-1263)
Ground improvement, i.e., Cast-in-Place Concrete Bored Piles and other soil improvement activities.
25 nos. Overhead Transmission Lines (OHTL) for 115kV, i.e., New Gantry Tower, Seashore Gantry
Tower and Other Types of Towers, Equipment Structures Foundations, and Access Roads.
Upgrade Firewater Piping at Safaniyah Wet Crude Facilities (BI-10-1284)
HDPE fire water lines, Road restorations, and Road crossing pipe concrete encasements.
Manifa Upgrade Water Injection Projects (BI-10-2459)
Well no.08, Well no.09, and Manifa refinery upgrade water injection.
Yanbu to North Jeddah Dual Pipelines Project (BI-10-2155)
The pipelines are dual pipelines arranged to deliver two grades of gasoline (PG91 & PG95), ULSD, and Jet A-1 refined products to an upgraded and expanded NJBP. YNJ-1: 20” Pipe at 340.50 Km gasoline pipeline and YNJ-2: 24” Pipe at 340.50 Km Diesel & Jet A-1 pipeline.
Responsibilities:
Performed contributions of review and comments of construction-related documents submitted by the EPC contractors such as Contractor’s ITP, Method Statement, Materials submittals and receiving, Ready Mix Concrete Mixed Design, Asphalt Concrete Job Mixed Formula, Asphalt Concrete Pavement, Bedding & Sand Pad Materials, Fill and Select Fill Materials, Steel Reinforcements, Steel Structure Elements, Anchor Bolts, E-Review of Engineering Drawings and All others related items in before and during the construction phase.
Performed contributions of E-review and generate comments on the Detailed Civil/Structural Design Drawings Package in line with Saudi Aramco Engineering Standards and Project specifications.
Ensure the Saudi Aramco Typical Inspection Plans (SATIPs), Saudi Aramco Inspection Checklist (SAIC) Saudi Aramco Test Report (SATRs), and all other Quality checklists involved in Civil / Building, Structural Steel and All other relevant Pipelines activities per the SAUDI ARAMCO Engineering Standards & Specifications, International / Local Industry Standards, Governing Codes, Detailed IFC/AFC’s drawings, Quality Requirement Schedule “Q”, Project Quality Plan, Procedures, Quality Management System (QMS) and Enterprise Project Management (EPM) or QMIS applicable system.
Ensure the implementation and adhered to the Quality Assurance and Quality Control Programs, Company & Client's Procedures, Inspection & Test Plan (ITP) or SATIP, Approved for Construction Drawings or Details, Vendor's Drawing/Catalogue, Governing Codes, Specifications, and International/Local Standards and appropriate HOLD POINTS are signed as required.
Carried out inspections of Enterprise Project Management (EPM) or in Quality Management Information System (QMIS) issued RFI’s by the EPC contractors as per SATIP and ensures records are maintained in EPM/QMIS log and close-out.
Day to day performed site verification and surveillance of Civil, Building, Structural Steel, and Pipelines activities and EPM/QMIS logbook and update of Proactive, General comments, Focused assessment, and Standard violations, RFI’s closed-out items, and logbook entries of Contractor’s INCR and assist including the rectification and resolution of the problems as necessary as per Project Quality Requirements “Schedule Q” and SAEP-381.
Scope/project descriptions: Power Generation Building (PGB), Six (6) Units of Gas/Combustion Turbine Generation (GTG/CTG’s), Six (6) Units of Heat Recovery Steam Generation (HRSG), Two (2) Units of Steam Turbine Generation (STG’s), Two (2) Units of Air Cooled Condensers (ACC’s) and Balance of Plant (BOP) such as in the 380kV Cable Trenches, Cable Racks, Utilities Pipe Racks, Electrical/Communication Duct Banks, Cooling Tower Building, Evaporation ponds, Storm water drainage & manholes, Transformers, electrical buildings & switchyards, Cooling tower building, SCADA building, Substations, and Arabian Super Light (ASL) Tanks Farm for the PP14 Combined Cycle Gas Turbine (CCGT) Power Station (2, 000 MW) Projects.
Responsibilities:
Ensure that all construction EPC contractors’ supervision and manpower are instructed in and comply with all aspects of Health, Safety, Environment, and Security (HSES) policy with Zero harm philosophy, site regulations, permit to work procedures and instructions, and Client requirements.
Ensure that all supervisions, and related activities including construction planning, scheduling, quality control, and safety. Field and Office Coordination are working closely in all site activities, effective communication with site personnel, and effective conflict resolution with the EPC Contractors.
Ensure that construction EPC contractors working within his discipline adhere strictly to the latest Approved/Issued for Construction (AFC/IFC) drawings, Project Specifications, Inspection & Test Plans (ITP’s), Procedures, and Site / Field Instructions.
Review and monitor the availability of the AFC/IFC’s drawings, specifications, construction-related documents submitted by the EPC contractor, job instructions, and material deliveries.
Supervised and inspect the implementation of underground utilities such as electrical manholes, duct banks & pits, Turbine’s equipment foundations, Power generation building foundations, Substations, Control buildings, and all other steel structures foundations, concrete masonry buildings, architectural finishing, roadways, etc.
Conducted Civil/Building Inspection of reinforced concrete building, equipment & steel sub-structures /foundations, manholes, catch basins, electrical & communication duct banks, 380 kV Cable trenches & manholes, Evaporation ponds & pipe racks, pipe sleepers, etc. such as in the proper installation of reinforcing steel bars (e.g. splicing, development length, hooks & bending), formworks, anchor bolts & boxes, block-outs, concrete covering, plumpness/alignment, shoring & scaffolding, proper placing of concrete, sampling and testing of specimens as per specified and required slump design, aged, strength with other mechanical properties, curing and concrete epoxy coal tar / bituminous coatings.
Supervised and inspect the EPC Contractor before starting work the Contractor must produce a method statement which shows as correct and proper Location of cranes, Materials handling & preservation, Materials lay down/preassembly area, Method of bolting at heights e.g. scaffold, man box or from steelwork with safety belt, Contractor uses the correct sizes and types of spanner for bolting up, Contractor has slung the steel members correctly with nylon type slings and no lift takes place without tag lines and removing of slings safely.
Monitor the construction EPC contractor’s activities in compliance with Construction Management Plan, Site Materials Management Plan, Project Quality Plan (PQP), and Quality Management Systems (QMS).
Report to EPCM Area Construction Manager(s), Construction Manager, and Project Manager of any EPC Contractor(s)/sub-contractors in non-conformance or non-compliance activities of safety, quality, and progress.
Scope/project descriptions: KNPC’s FEED Enhancement of Gas Train-5 (GT-5) Front End Engineering Design-FEED/ITB Package, Replacement of 14 NO’s Old and Obsolete Substations and Metering Skids at Mina Al-Ahmadi (MAA), Mina Abdulla (MAB) and Shuaiba (SHU) Refineries.
Responsibilities:
Assigned Construction Civil Engineer (Front End Engineering Design - FEED) and EPC Phase to provide support to the Project Engineering and Management Services (PEMS) and to supervise and verify the implementations of contractors of Ground Scanning, Topographic Survey and Slit Trenching Works per issued for implementation FEED drawings, technical specifications, the scope of works, contracts and schedule to commence for Enhancement of Gas Train (GT)-5 FEED / ITB Package Project and Replacement of 14 NO's Old and Obsolete Substations at Mina Al-Ahmadi (MAA) Refinery.
Ensure that all construction contractors' supervision and manpower are instructed in and comply with all aspects of the Health, Safety, Environment, and Security (HSES) policy with Zero harm philosophy, site regulations, permit-to-work procedures and instructions, and Client requirements.
Ensure that all site supervision, management, field, and office coordination are working closely in all site activities, effective communication with site personnel, and effective conflict resolution with the EPC engineering contractors.
Supervised and verify the implementations of Contractor/subcontractor of Ground Scanning, Topographic Survey, and Slit Trenching Work per issued technical specifications, the scope of works, project documents & contracts and commenced schedule for KNPC's Works Orders. Construction Engineer support for Project Engineering and Management Services (PEMS).
Supervises contractor's day-to-day work activities in the field of investigation or construction site.
Reviews construction sites and assists in obtaining the necessary work permits and work authorizations before commencing the works executions.
Carried out inspection for the issued RFI’s EPC contractors, surveillance and witnessed the contractor’s activities, and ensure records are maintained and included as-built data.
Ensure the KNPC Safety standard is being implemented to achieve the Zero Accident Philosophy.
Participates in the environment, health & safety programs, and toolbox meetings.
Participates in the weekly progress meeting with KNPC, AMEC, and the Contractors' management team.
Verify and check the daily and weekly reports by the Contractors before submitting them to KNPC Project Division representatives for updates on the progress on the construction site.
Review and monitor contractor’s construction sites and activities to meet Company project specifications and EHS requirements.
Report to the ESM/PEMS Line Manager of all fields in construction activities, quality, and project status including the documentation for evaluations and advice for corrective actions.
Scope/project descriptions: Saudi ARAMCO - DOW Chemical’s Co. - SADARA Petrochemicals Complex - Utilities, Power, and Infrastructure (UPI) Projects - Jubail Industrial City-2, Kingdom of Saudi Arabia.
Responsibilities:
Ensure the Project Inspection & Test Plans (ITPs) and all other Quality checks involved in Civil / Building / Structural Steel / Architectural executions by SADARA / Overlay of DOW and SAUDI ARAMCO Engineering Standards & Specifications, International / Local Industry Standards, Governing Codes and detailed IFC design drawings.
Ensure the implementation and adhere to the Quality Assurance and Quality Control Programs, Company & Client’s Procedures, Inspection & Test Plan (ITP), Approved for Construction Drawings or Details, Vendor’s Drawing/Catalogue, Governing Codes, Specifications, and International/Local Standards and appropriate HOLD POINTS are signed as required.
Day-to-day surveillance on Site with construction supervisors, superintendents, and engineers of Civil, Building, Structural Steel, and Architectural activities and issued Site Surveillance Reports, NCR for the non-conformance and assist including the rectification and resolution of the problems as necessary.
Supervised, monitored, and ensure the implementation and adhere to the QA/QC programs, Company procedures, Inspection & Test Plans (ITPs), detailed IFC drawings, vendor’s drawings/recommendations, Governing Codes, SADARA / Overlay of DOW and SAUDI ARAMCO Engineering Standards & Specifications, International / Local Standards and appropriate HOLD POINTS are signed as required.
Interprets design drawings and supervises field verification of materials and provides technical direction as per Scope of Works. On-site responsibilities also included: ensuring the implementation of schedule compliance to a QA/QC Plan and monitoring all Civils such as electrical & communication manholes and duct banks, sump pits, Substations Building, Control buildings, and all other steel structures foundation and concrete masonry buildings, structural steel and reinforced concrete building and concrete & asphalt pavement roads by governing codes, specifications, and international/local industry standards.
Carried out inspection for the issued Contractor RFI’s, surveillance witnessing of contractor activities, ensure records are maintained, including as-built data.
Ensure execution of the works in accordance with the functional requirements and specifications such as the Non-Metallic water stop material shall be Thermoplastic Elastomeric Rubber (TPER/TPV). TPER is a fully vulcanized synthetic rubber with high resistance to a wide range of oils, solvents, and chemicals.
Checked and verify the Work Transfer or Handover Notice from Contractor(s) before grouting on equipment and steel structure foundations.
Monitor the quality performance of the Contractor(s) against the requirements of the QA/QC Plan.
Ensure all required records are maintained and all inspection tracking systems are updated.
Report of any EPC Contractor’s non-conformance activities to the EPCM QA/QC Managers, Construction Manager and Area Construction Superintendents.
Scope / project descriptions: Saudi ARAMCO - DOW Chemical’s Co. (SADARA) - SADARA Petrochemicals Complex - Chem II Isocyanates Projects - Jubail Industrial City-2, Kingdom of Saudi Arabia.
Responsibilities:
Assigned at main sites in Toluene Di-Isocyanate (TDI) Plant and Polymetric Methyl Di-Isocyanate (PMDI) Plant Area.
Ensure the Project Inspection & Test Plans (ITP’s) and all other Quality checks involved in Civil / Building / Structural Steel / Architectural executions in accordance with SADARA / Overlay of DOW and SAUDI ARAMCO Engineering Standards & Specifications, International / Local Industry Standards, Governing Codes and detailed IFC design drawings.
Ensure the implementation and adhered the Quality Assurance and Quality Control Programs, Company & Client’s Procedures, Inspection & Test Plan (ITP), Approved for Construction Drawings or Details, Vendor’s Drawing/Catalogue, Governing Codes, Specifications and International/Local Standards and appropriate HOLD POINTS are signed as required.
Ensure execution of the works is accordance with the functional requirements and specifications such as the Non-Metallic water stop material shall be Thermoplastic Elastomeric Rubber (TPER/TPV). TPER is a fully vulcanized synthetic rubber with high resistance to a wide range of oils, solvents, and chemicals.
Monitor the quality performance of the Subcontractors against the requirements of the QA/QC Plan.
Interprets design drawings and supervises field verification of materials and provides technical direction as per Scope of Works. On site responsibilities also included: ensure the implementation of schedule compliance to a QA/QC Plan and monitoring the all Civils such as electrical & communication manholes and duct banks, sump pits, Substations Building, Control buildings and all other steel structures foundation and concrete masonry buildings, structural steel and reinforced concrete building and concrete & asphalt pavement roads in accordance with governing codes, specifications and international / local industry standards.
Duties included in building internal and external construction activities (e.g., concrete masonry units, plastering, water proofing, coatings / paintings, and all QC inspections such as plumbing installation with leak testing, HVAC opening installation and various architectural finishing.
Also performed site audits on subcontractors of utilizing the correct design drawings revision.
Assist the Quality Control Manager or Deputy Manager in ensuring compliance with approved Quality procedures, ensuring that the Project requirements are meet.
Saudi Arabian Mining Company (MA’ADEN) - Ma’aden Minerals Industrial City Infrastructures Phase-II Projects - Ras Al Khair, Kingdom of Saudi Arabia.
One Hundred Nine (109) Units Buildings (e.g., MAP Club House, Sports Club Alumco, MPC & MIC Club House, Sports Club Alamco-Infraco, Manager’s Club House, VIP Villa and MAP & Alumco Mess Hall); Sub-Stations / Electrical Infrastructures, Irrigation Tanks, Pump Rooms, Underground Utilities and Roads Projects.
Responsibilities:
Ensure that all construction contractors’ supervision and manpower are instructed in and comply with all aspects of Health, Safety, Environment and Security (HSES) policy, site regulations, permit to work procedures and instructions and Client requirements.
Ensure the implementation and adhered the Quality Assurance and Quality Control Programs Company & Client Procedures, Inspection & Test Plan (ITP), Approved for Construction Drawings or Details, Vendors Drawings / Recommendations, Governing Codes, MA’ADEN Project Specifications, and International / Local Standards and appropriate HOLD POINTS are signed as required.
Ensure overall construction is executed and related inspections in accordance with applicable specifications, drawings, codes, standards, ITP’s and to the requirements of the Contract.
Participate the regular on-site EPC Contractor progress meetings, at interface coordination meetings and ensure the site safety rules for the defined plant area and responsible for the EPC Contractor scope to be executed including all the interfaces and safety requirements.
Participate in site safety audits regarding work execution, permits, work site standards and workforce knowledge of the work.
Carry out inspection for the issued RFI’s by the EPC contractors, witness, and surveillance of contractor activities, ensure records are maintained, including as-built data.
Contribute to the development of all activities relating to design and construction phases such as front-end engineering design (FEED), detailed engineering design documents, review of contractor submittals and comments, vendor’s materials & documents, construction methods, implementations, and management; quality assurance / quality control inspection plans and engineering liaison with design offices.
Interprets design drawings and supervises field verification of materials and provides technical direction as per Scope of Works. On site responsibilities also included: ensure the implementation of schedule compliance to a QA/QC Plan and monitoring the all Civils such as electrical & communication manholes and duct banks, pits, Substations Building, Control buildings and all other steel structures foundation and concrete masonry buildings, structural steel and reinforced concrete building and concrete & asphalt pavement roads in accordance with governing codes, specifications and international / local industry standards.
Scope / projects descriptions:
The Bahrain Petroleum Company (BAPCO) /CHEVRON-CALTEX/ NOGAHOLDING / Neste Oil Oyj- Lube Base Oil Plant (LBOP) Projects, - Awali, Sitra & Wharf, Kingdom of Bahrain
The Project Licensor for Reaction Section- Chevron Lummus Global and the Product Distillation Section-Neste Jacobs Oyj with Plant Capacity of 400, 000 MTPA Very High Viscosity Index (VHVI) Group III Base Oils. Refinery in Awali, ten (10) Units Finished Product Tanks in Sitra Tank Farm and twenty (20) km Product Pipelines from Refinery Area to Wet Gap Area to Sitra Tank Farm Area with Sub Sea Pipeline and to Wharf Loading Area.
Saudi Basic Industries Corporation (SABIC) / Saudi Kayan Petrochemical Company- SKPC Polypropylene (PP) & Product Handling (PH) Projects - Jubail Industrial City, Kingdom of Saudi Arabia
The PP Plant Design Capacity: 350 KTA, Product Grade: Homo Ethylene Random Butene-1 & Impact and the Licensor & Process: BASELL & SPHERIPOL and Product Handling (PH) Warehouse is L= 1, 000 meters by W=350 meters.
Scope / projects descriptions:
SABIC / Eastern Petrochemical Company (SHARQ) - SHARQ 3rd Expansion Olefins Complex - Ethylene Plant Projects- Jubail Industrial City, Kingdom of Saudi Arabia
The projects composed of eight (8) Units Ultra Selected Conversion “USC” Cracking Furnaces, Three (3) Boilers and Balance of Plants (BOP) which Sub-Contracted by ARCC / EEI J.V. and EPCM by Shaw Stone & Webster Arabia.
SABIC / Jubail United Petrochemical Company (JUPC) - Linear Alpha Olefins (LAO) - Ethylene Glycol Plant Project- Jubail Industrial City, Kingdom of Saudi Arabia
Manpower supplied to Linde Arabian Contractors (Linarco) as a QA/QC Inspector in Structural Steel, Mechanical (Static) and Painting & Insulation.
SABIC / Jubail United Petrochemical Company (JUPC) - JUPC Olefins - Ethylene Plant and Debottlenecking Projects- Jubail Industrial City, Kingdom of Saudi Arabia
Debottlenecking project for 8 furnaces and balance of plant where Sub-Contracted by ARCC / EEI J.V. and EPCM by Chiyoda Petrostar, Halliburton KBR & Mitsubishi Consortium.
SABIC / ExxonMobil R&E / Al Jubail Petrochemical Company (KEMYA) - Kemya Olefins Plant (KOP) H-Furnace and U&O Turnaround/Shutdown Projects- Jubail Industrial City, Kingdom of Saudi Arabia
The projects scope included the KOP H-Furnaces and Utilities & Offsite Shutdown which Sub-Contracted by ARCC / EEI J.V. and EPCM by ABB Lummus Global-Alireza Co.
SABIC / ExxonMobil R&E / Al Jubail Petrochemical Company (KEMYA) - Kemya Olefins Plant (KOP) Cracking Furnaces and Furnace Piperack Projects- Jubail Industrial City, Kingdom of Saudi Arabia
The projects scope included the erection packaged of two (2) additional Cracking Furnaces, Furnaces Pipe racks and balance of plant where sub-contracted by ARCC/EEI Corp. J.V. and EPCM by Technip Benelux B.V.
36 Story High Rise Building (GLOBE ASIATIQUE) Tower-1 Condominium Project
Edsa Avenue - Boni St., Mandaluyong City, Philippines.
The 36-storey luxury residential condominium and commercial building and the project scopes included the 36 Floors (4.8 meters per floor considering the Loft Area) and with total height of 165 meters. EEI Corporation- the General Contractor, covered the site works, civil/structural works, architectural works, MEPF embeds, attendance to special contractors, and supply of provisional works.
Maynilad Water Services Incorporated (MWSI) - Rehabilitation of Water Piping System, Sewers, Manholes and New Service Connections Projects at Manila City, Pasay City and Makati City, Metro Manila, Philippines
Manpower supplied to MWSI as Projects Inspector where responsible of various site locations and leading the team such as in Civil and Underground Piping on Rehabilitation of Pipelines, Sewers, Manholes and New Service Connections Projects in various areas of Manila City, Pasay City and Makati City, Metro Manila.
Bachelor of Science in Civil Engineering with Structural Engineering specialization and highest grade (84/100)