TRACTION SCADA MIMIC EXPERT
ITALFERR SPA
Total years of experience :15 years, 6 Months
1. Preparation of Tender Requirement Specification for UPMRCL
2. Working as General Consultant for KANPUR/AGRA Metro for Traction Power Supply and SCADA Expert K3 Position
3. Scrutiny and checking of all designs & drawings of AC and DC rail traction power substations, Wayside, 220 KV GIS, 33 KV AIS and GIS Switchgear, Power Transformer and Rectifier Transformers, Auxiliary Transformer in Underground and Elevated Station and enabling works submitted by the contractors, in respect of their adequacy to conform to the design standard approved by authority (after scrutiny and check, be put for approval of authority).
4. Attend Weekly Design Review Meeting with Contractor and Client
5. Planning and Scheduling of Traction Power Supply works
6. Attending Interface meeting for Station and Depot area with RST, Civil, Signalling, Telecom Contractor
7. Vendor finalization and Approval of Major and Minor Items
8. Monthly Project Report Submission to UPMRCL
9. Assigned task to our team Member and Follow-up on Daily Progress of Related activity
10. Testing and commissioning User requirements analysis for Power Supply and SCADA Works
11. Review and approval on GTP, Clause by Clause, FAT, SAT, Type Test submitted for Traction Power Supply and SCADA
12. Attending FAT and SAT on the behalf of UPMRCL
13. Review and Approval of SCADA IO list, SCADA HMI layout
14. Design review of RTU panel, SCADA software as per IEC Standard
15. Preparation PPT for Monthly progress review Meeting
16. Design review and Approval of System Architecture, Server, workstation, furniture of OCC and BCC, Local SCADA
ICT
• My position was carried-out activity involved Inspection of TSS/SP/SSP location in EDFC Section CP-105, CP-304, CP-305 on given interval
• Randomly Site visit in specified section of EDFC as World bank representative on daily basis
• Attend monthly meeting with DFCC/PMC/Contractor on overall execution of works to be carried to acheived Target dates, If any issue on Safety and work quality
• Understand the international codes and Stardards
• Preparation of work progress Report on Monthly and 3 Monthly basis, and submit to DFCCIL and World Bank for review
• If Any issue found during Site visit in terms Quality and Safety, We informed to PMC/DFCC/Contractor immediately without any delay
• Inspection of SCADA System hardware (HMI) along with associated equipment’s at OCC including Computer Servers, workstation to be controlled and monitor the equipment’s at TSSs, SSPs and SPs, Junction Stn, Crossing Stn. ALH location.
• Review and Approval of SCADA IO list of Traction Substation, SP, SSP
• Attend FAT of SCADA-RTU panel of Traction Substation, Including RTU, Axillary relay, IO cards, CPU, IEC cards, Control Logics, RTU Configuration file
• Verification and Validation of SCADA IO list and SCADA HMI of Traction Power Supply consist of Monitoring and CB, motorised ISO, Transformer, OHE/OCS power, Battery, Battery Charger Monitoring, Overvoltage, Fault Current in SCADA Alarm list, and Control of CB and ISO.
• Check and Inspection of All power and Control cabling Termination in proper manner using Ferrule identification
• Follow the SCADA checklist and Installation manual, Test procedure for Site Accetance Test Activity
• V&V of SCADA HMI of Traction Substation TSS/SP/SSP
• During Validation of SCADA HMI, DI, DO, AI, Metering, Protection, Follow the SLD, Design document, Interlocking, Symbols to be correctly shown during Open and Close, Colour, Alarm List, Report, Equipment to be identified in SCADA IO list
• RTU Protocol Communication between TSS to Operation Control Centre over IEC-104
• Verification of Networking Equipment like LAN switch, WAN switch, Fibre Network
• No Single point failure should impact on SCADA and Telecommunication System to full fill the requrement specified in RAMS document
• Point to point test of Traction Substation Equipment on Simulation with local SCADA-HMI
• End to END test with Central SCADA HMI on actual basis
• Inspection, Supervision/monitoring of 132/2*25 kV Traction substations (TSS) and Power Supply Control posts SP(s), SSP(s), junction station, Crossing station, LC Gate, IMD, IMSD, and other locations.
• Preparation of SCADA IO list of 33 kV AC /750 V DC Traction Power Supply and 33/0.4 Station Power Supply TPS/SPS/ITPS/ISPS
• Attend FAT of SCADA-RTU panel of Traction Substation, Including Traction PLC, Patch Panel, Telecom Switch for LAN and WAN, Patch cord
• Verification and Validation of SCADA IO list and SCADA HMI of Traction Power Supply consist of Monitoring of TCB, VCB, motorized ISO, Rectifier Transformer, Inverter Transformer, 3rd Rail power Monitoring, OVPD, Battery, Battery charger, Overvoltage, Fault Current, Categorize SCADA Alarm list, and Control of TCB, VCB and ISO., Interfacing with ATS, Fire Alarm, CCTV coordination, ACS from Centralized Control Room
• Check and Inspection of All power and Control cabling Termination in proper manner using Ferrule identification
• Follow the SCADA checklist and Installation manual, Test procedure for Site Accetance Test Activity
• V&V of SCADA HMI of Traction Substation TPS/SPS/ITPS/ISPS follow as per Interface Control Document
• During Validation of SCADA HMI, DI, DO, AI, Metering, Protection, Follow the SLD, Design document, Interlocking, Symbols to be correctly shown during Open and Close, Colour, Alarm List, Report, Equipment to be identified in SCADA IO list
• RTU Protocol Communication between TSS to Operation Control Centre over IEC-104
• Verification of Networking Equipment like LAN switch, WAN switch, Fibre Network
• No Single point failure should impact on SCADA and Telecommunication System to full fill the requrement specified in RAMS document
• Point to point test of Traction Substation Equipment on Simulation with local SCADA-HMI
• End to END test with Central SCADA HMI on actual basis
• Inspection, Supervision/monitoring of 33kv AC /750 Vdc Traction substations TPS
• Traction Substation Receiving 132 KV/33 KV BulK Power Supply Substation incoming supply
• Inspection of SCADA System hardware (HMI) along with associated equipment’s at OCC including Computer Servers, workstation to be controlled and monitor the equipment’s at TPS and SPS.
• Design, Validation and Verification of Traction SCADA and PRTUs (Protocol Remote Terminal Unit) Moxa DA-682 A-RTU (Linux Embedded System) by deploying the software releases from offshore team and configuring it with all the interface system IP addresses, thus making it ready for interface tests.
• Leading the SCADA Pre-Commissioning Tests, Partial Acceptance Tests, Acceptance Tests & System Integration Tests along with Client Representatives, PMCs, Quality Control Inspectors, Interface parties, etc. w.r.t system readiness
• Pre-Commissioning works (checking the RTUs, terminations & wiring (Optical fiber/Cat6) in both the local cabinet and between 3rd parties against schedules
• Development of Thales SCADA Soft 7.6.17.0 version deployment and testing of SCADA Server and HMI
• Create, review and revise the SCADA Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) Test Procedure based on the Sub-System Specification / Requirement Documents
• Inspection of SCADA System hardware (HMI) along with associated equipment’s at OCC including Computer Servers, workstation to be controlled and monitor the equipment’s at TPS and SPS.
• Pre-Commissioning works (checking the RTUs, terminations & wiring (Optical fiber/Cat6) in both the local cabinet and between 3rd parties against schedules
• Development of Thales SCADA Soft 7.6.17.0 version deployment and testing of SCADA Server and HMI
• Create, review and revise the SCADA Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) Test Procedure based on the Sub-System Specification / Requirement Documents
• Leading testing of all SCADA IO points between 3rd party equipment and SCADA/OCC at the Control Centers level and Station Level
• Support the OCC-SCADA Platform and IVVQ activities and completing the test specifications, as per the Interface Control Documents (ICD) & carrying out all the Integration, Verification, Validation & Qualification tests
• Capturing and analyzing the data transfer with the RTU & different 3rd party systems through standard industrial protocols like IEC 104, Modbus, TCP IP, etc. using Network Protocol Analyzers: Wireshark
•
• I was worked in Mott MacDonald as General Consultant for DFCC (Indian Railway) with Systra-Mottmac (JV) and based at Allahabad, Design Verification And Validation, Inspection, Supervision, Monitoring, Testing and Commissioning for my responsibilities includes:
• Directly reporting to the TEAM Lead and will work closely to other Systems team members.
• Review technical specifications for Control Centre Subsystems, design of the OCC layout, SCADA and Traction Power Supply up 132/2*25 KV TSS, operating plans, test case scenarios delivered by the Design & Built Contractor.
• To evaluate design information to ensure conformity to industry best practice and ensure that client requirements are fulfilled.
• Some travel to other countries for witnessing and approving FAT Testing as required.
• Preparation of rules and procedures for Operations, CBTC systems and regulation.
• Requirements management including refinement and traceability
• RAMS design System performance
• Analyze design options and specifications
• Development of safety/operational concept
• Lead the design review, from an operational and maintenance perceptive, of SCADA, MMIS and related sub-systems and more specifically lead the review of the SCADA design submitted by the Design & Built Contractor
• Test cases for implementation during the commissioning and acceptance of SCADA system.
• Review and approval of the operational safety case.
• Review OCC layout in accordance with the task analysis.
• Review the contract and the specification that the supplier has given to make sure that it matches the requirements.
• Reviewing the Factory Acceptance Test Procedure and Plans to ensure the compliance with the contract
• Meeting with the design and build contractors and the supplier to make sure all are in compliance and changes are within the scope of the supplier and the contractors.
• Facilitate and Participate to the Factory Acceptance Test of the SCADA system
• Preparing reports, request for more information and letters to the client for clarifications that may arise.
• Integration testing of Traction Power SCADA with Train Management Systems (TMS)
• Engineering and Designing of OCC BMS with Auxiliary SCADA systems at Operational Control Centre (OCC) over IEC 60870-5-104
• RAMS verification for Traction SCADA and Auxiliary SCADA Facilities at Integrated Operation Control Centre (IOCC)
• Telecontrol Interfaces with Indian Railway’s Traction Power Control Centre (TPC) at NCR’s Remote Control Centre (RCS) Allahabad for data exchange between DFCC’s Traction Substations for Loop in - Loop out (LILO) arrangement.
• Implementation of Earthing and Bonding for RTUs and SCADA Systems
• Interlocking Testing required for safe and reliable operation of Circuit Breakers (CB), Bridge Interrupters (BM) and Sectionalizing motorized Isolators
• Inspecting FAT & SAT
Preparation of SCADA I/O Lists as per UPPCL guidelines
•Pre commissioning & Post commissioning of RTUs through Point to Point and Close loop testing with Operation Control Centre
•SCADA Adaptation works for existing substations, configuration, programming & fine tuning of RTUs.
•Testing & commissioning of O/C & E/F, voltage and frequency relays, Testing & commissioning of all distribution protection schemes
•Testing and Commissioning of LV Circuit Breakers
•Experienced in testing and commissioning of HV & MV cables and DC System Testing & commissioning of Transducers required for Watts, Vars, Voltage, Amps.
•Software Installation, feeding database, graphics designing.
•We equipped RTU as a controller on sub-stations. For controlling purpose of electricity flow we provided Breakers ON-OFF control in SCADA.
•We provide MMI for Traction Power Controllers, proper arrangement done with FEP, Servers.
•Made different reports of Alarms and Events using Crystal Reports tool using system database.
•Protocol Used: IEC-101, IEC-104 (b/w Master & Slave station
Execution of the project engineering involving Installation, commissioning & testing of electric Control Panel.
•In-depth knowledge of data sheets, instrument drawings, I/O wiring diagrams, calculation and specifications.
•Troubleshoots plant electrical problems to determine their cause and recommends options for eliminating such problems. Includes carrying out tests on equipment.
•Planning for resources and manpower for planned shutdown of the plant and execution including start-up.
•Planning, Execution, Installation, Testing and Commissioning of Electrical Equipments. Maintenance of field instruments, good exposure to engineering surveys & documentation, material take-offs and as-built drawings etc.
•Commissioning of Substation Up To 22 Kv Level, HV/LV MCC & Switchgear Panel, CCR, RIE
•Siemens PLC, INVERTER, SCADA Panel installation as well as maintenance.
•Gives training to the technician in Electrical, Hydraulic and Pneumatic machines for making CORRECTIVE and PREVENTIVE, CONDUCTIVE maintenance for all production machines.
•Supervise and manage vendor engineering and equipment deliverable to ensure compliance with project standards and specifications.
•Maintenance & Troubleshoots plant electrical problems to determine their cause and recommends options for eliminating such problems. Includes carrying out tests on equipment.
•Capable of guiding/leading the electrical maintenance team and implementing the best maintenance strategy for the plant systems.
•Condition Monitoring and Predictive maintenance of critical equipment and corrective actions to avoid breakdown.
•OPERATION and Maintenance of HURST BOILER, AMERICA
•Compressor, MILNOR Washing Machines, Chikago IRONER,
•Capable to understand the system related to Milnor Tunnel washer like Miltrac, Drynet.
•Capable to supervision, installation, testing and commissioning of all machines in the plant.
•Experience in solenoid valves,
•Capable to install all software related to Machines Installation.
• Preparation of SCADA I/O Lists as per UPPCL guidelines
• Pre commissioning & Post commissioning of RTUs through Point to Point and Close loop testing with Operation Control Centre
• SCADA Adaptation works for existing substations, configuration, programming & fine tuning of RTUs.
• Testing & commissioning of O/C & E/F, voltage and frequency relays, Testing & commissioning of all distribution protection schemes
• Familiar with IEC 61850 Protocol, feeder/transformer stability test and relays
• Familiar with Protection System: Feeder, Transformer and Cable Differential Protections
• Testing & commissioning of O/C & E/F, voltage and frequency relays, Testing & commissioning of all distribution protection schemes
• Testing and Commissioning of LV Circuit Breakers
• Complete Study/review of Vendor drawings and taking approval from the Client
• Preparation of Design calculation for the 132/11KV, 33/11kV and LV for SCADA works
• Coordination with the Client and consultant during the final testing and commissioning of electrical systems
• Involved with writing design specifications and scopes of work for construction and implementation of SAS installations involving integrated protection and control (SCADA) for new major substations.
• Performed construction oversight of contractor’s installation of new SAS equipment and systems in new substations.
Familiar with IEC 61850 Protocol, feeder/transformer stability test and relays
•Familiar with Protection System: Feeder, Transformer and Cable Differential Protections
•Testing & commissioning of O/C & E/F, voltage and frequency relays, Testing & commissioning of all distribution protection schemes
•Testing and Commissioning of LV Circuit Breakers
•Complete Study/review of Vendor drawings and taking approval from the Client
•Preparation of Design calculation for the 132KV, 33kV and LV cables
•Coordination with the Client and consultant during the final testing and commissioning of electrical systems
•Experience in Preparation of Testing and commissioning procedures/ Method of Statements
•Testing and Commissioning of Switchgears: 132kV/66kV/11kV & LV
•Transformers: 132/33kV, 33/11kV, 33/11kV rating up to 25MVA
•Knowledge on Protection System: Feeder, Transformer and Cable Differential Protections
•Experienced in testing and commissioning of HV & MV cables and DC SystemPROJECT HANDLED: SCADA Installation
•400 /220 KV Substation, Rajasthan State Electricity board, Jaipur
•132/ 33 KV Substation, Calcutta state Electricity Board Kolkata
•33/11 KV Substation, HPSEB, Unmanned Substation
•33/11 KV HPSEB Substation Automation Systems
•NDPL for Distribution Automation SCADA/ DMS and Substation Automation for HPCL, Communication through SCADA Systems of Substation and Feeder.
•Familiar to work on RTU/SCADA based Systems
•Designing of all Electronic Control Panel Like PLC and Drives
•Testing and Installation at Site of electric Control Panel.
•Maintenance of field instruments, good exposure to engineering surveys & documentation, material take-offs and as-built drawings etc.
•Knowledge of Standards for switch gear installation, control panel installation, cable tray, Cable trench, Cable lying, Motor Erection, Battery Bank, Transformer Erection, Earthing system plant.
in