SENIOR MECHANICAL ENGINEER (ROAD STRUCTURES AND BUILDING FACILITIES MAINTENANCE/ SUPERVISION)
TRAFFIC & ROADS AGENCY (RTA)
مجموع سنوات الخبرة :23 years, 8 أشهر
PROJECTS WORKED ON MANAGING OF MAINTENANCE ROAD STRUCTURE AND FACILITIES :
• AIRPORT TUNNEL
• AL SHINDAGHA TUNNEL
• AL FLOATING BRIDGE
• AL MAKTOUM BRIDGE
• RASHID HOSPITAL TUNNEL
• DEIRA ROAD STRUCTURE AND FACILITIES
• BUR DUBAI ROAD STRUCTURE AND FACILITIES.
• REMOTE MONITORING SYSTEM FOR ROAD STRUCTURE AND FACILITIES.
• BRIDGE MAINTENANCE AND MANAGEMENT SYSTEM (BMMS)
JOB PURPOSE AND RESPONSIBILITIES:
• MANAGE THE MAINTENANCE ACTIVITIES AS PER WORK PRIORITIES, PROVIDE SOUND AND ACCURATE TECHNICAL RECOMMENDATION AND SUPPORT. ENSURE ALL VITAL INSPECTIONS, ROUTINE/PREVENTIVE/ CORRECTIVE MAINTENANCE ACTIVITIES ARE CARRIED OUT EFFECTIVELY.
• MAINTENANCE ACTIVITIES SYSTEM SUCH AS BUT NOT LIMIT TO:
o HVAC SYSTEM (AIR COLD CHILLER, DX SPLIT UNITS AND ETC..)
o DRAINAGE PUMP STATION
o FIRE PUMP STATION
o FIREFIGHTING AND FIRE ALARM SYSTEM
o ELEVATOR
o ESCALATOR
o WATER FEATURE
o LIGHTING AND DIMMING SYSTEM.
o LV SWITCH GEAR SYSTEM
o TUNNEL VENTILATION (JET FAN )
o EMERGENCY GENERATOR.
o HYDRAULIC SYSTEM
o MECHANICAL GEAR SYSTEM
• FOLLOW UP AND ENSURE TIMELY COMPLETION OF DEFECT RECTIFICATIONS ACCORDING THE TIME SCHEDULE TO AVOID ANY IMPACT ON THE ALL OVER PLAN OF MAINTENANCE PLAN. THIS IS INCLUDING CHECKING AND APPROVING WORK ORDERS IN MAXIMO SYSTEM.
• PROPOSING THE EFFECTIVE POLICIES AND STRATEGIC PLANS TO RAISE THE OPERATIONAL PERFORMANCE OF MECHANICAL SYSTEMS IN THE STRUCTURES AND TO INCREASE THE REMAINING LIFE TIME OF IT.
• INVOLVE IN IMPORTANT INSPECTIONS AND ASSESSMENT ACTIVITIES RELATED TO MECHANICAL SYSTEMS IN ROAD STRUCTURES TASK SUCH AS THE HANDING OVER INSPECTIONS FOR SPECIAL / LAND MARK STRUCTURES, INSPECTIONS FOR ACCIDENTS CAUSED CONCERNED DAMAGES FOR CRITICAL ELEMENTS IN THE STRUCTURES.
• PREPARE THE TECHNICAL REPORTS FOR THE DEFECTS, REHABILITATION AND UPGRADING PLANNED ACTIVITIES AS WELL AS THE INTERNAL REPORTS FOR THE TOP MANAGEMENT STAFF.
• TAKING PLACE IN THE PREPARATION/DEVELOPMENT OF THE NEW MAINTENANCE CONTRACTS AS WELL AS IN THE DOCUMENT OF CONTRACTS PREQUALIFICATION.
• SHARING THE EXPERTISE TO SUGGEST THE MOST CONVENIENT SOLUTIONS FOR REPAIRING THE DEFECTS AND DIGGING BEHIND THE REASONS THAT LEAD TO THOSE DEFECTS.
• SHARING THE EXPERTISE TO UPDATE AND ENHANCE THE DIFFERENT CONSTRUCTION DETAILS IN ORDER TO AVOID IN FUTURE ANY DEFECTS DISCOVERED THROUGH THE STRUCTURES IN SERVICE.
•CHECK THE CONDITIONS OF MECHANICAL SYSTEMS AND GIVE THE RECOMMENDATION REGARDING THE SYSTEM NEEDS MAJOR REPAIRS OR REHABILITATION, BASED ON THE DAILY/MONTHLY/QUARTERLY REPORT SUBMITTED BY THE MAINTENANCE CONTRACTORS AND SPECIALIZED SUBCONTRACTORS AND THE ASSESSMENT REPORTS SUBMITTED BY SPECIALIZED CONSULTANTS.
•SUPERVISE THE PERFORMANCE OF THE ENGINEERS AND INSPECTORS AFTER TAKING INTO CONSIDERATION THE DISTRIBUTION OF THE ASSIGNED WORKS/TASKS TO THE STAFF OF THE SECTION OF RELEVANT SPECIALIZATION.
• CONDUCT THE INSPECTIONS AND ENTER THE DATA IN THE BRIDGE MAINTENANCE MANAGEMENT SYSTEM (BMMS) WHENEVER NECESSARY AND PRODUCE THE REQUIRED REPORTS.
• FOLLOW UP CONTRACTORS WORK AT SITE BASED ON THE PROGRAM AND ENSURE TIMELY COMPLETION OF WORKS INCLUDING ROUTINE PREVENTIVE AND CORRECTIVE AS PER APPROVED TIME POLICY.
• REVIEW DAILY PROGRESS REPORTS AND REFER TO THE ENGINEER.
• VERIFYING THE PRIORITIZATION OF REQUIRED CORRECTIVE MAINTENANCE WORKS BASED ON NATURE OF DEFECT, IMPORTANCE AND SAFETY.
• ENSURE THAT CONTRACTORS ARE USING APPROVED MATERIALS WHILE CARRYING OUT MAINTENANCE AND REHABILITATION WORKS FOR ROAD STRUCTURES.
• UPDATING THE SPECIFICATIONS OF THE MATERIAL ACCORDING TO THE EXPERIENCE AND PREVIOUS PERFORMANCE OF EACH MATERIAL AND INCORPORATING IT WITH THE PROPERTIES OF THE NEW PRODUCTS THAT ADD MORE VALUE IN THE STRUCTURE PROTECTION/PERFORMANCE.
• REVIEWING THE DRAWINGS, DOCUMENTS AND CALCULATIONS PRIOR TO RELEASING NOC FOR ANY WORKS NEARBY OR IN CONFLICT WITH RTA STRUCTURES.
POSITION MECHANICAL ENGINEER (DESIGN/SUPERVISION)
PROJECTS WORKED ON AS A DESIGNER:
• B+G+6 BUILDING -DUBAI
• SATELLITE STATION ABU DHABI GOVERNMENT PROJECT
• SATELLITE STATION AL AIN MILITARY
• TELEPORT BUILDING -DUBAI
• COLD STORE -DUBAI.
PROJECTS WORKED ON AS A SUPERVISOR:
• G+12 BUILDING -DUBAI
• B+G+12 BUILDING -DUBAI
• SATELLITE STATION ABU DHABI GOVERNMENT PROJECT
• SATELLITE STATION AL AIN MILITARY
• SHARJAH TRANSPORT ( STAFF, LABOR, GARAGE, WORKSHOP & ADMINISTRATION BUILDINGS) GOVERNMENT PROJECT
• G+6 BUILDING AT AL WARQAA
• DEWA B+G+2 OFFICES -DUBAI
JOB RESPONSIBILITIES:
• PREPARE MECHANICAL (HVACS, DRAINAGE, WATER SUPPLY & FIRE FIGHTING) DESIGN DRAWINGS IN ACCORDANCE TO THE FINAL ARCHITECTURE & STRUCTURE DRAWINGS, AND IN ADHERENCE TO LOCAL AUTHORITY’S RULERS AND REGULATIONS.
• KNOWLEDGE OF HEAT LOAD CALCULATION OF HVAC
• AFTER DESIGN SUBMIT THE DRAWING TO OBTAIN DM APPROVAL, ALL OTHERS AUTHORITY’S RULERS AND REGULATIONS REQUIRED.
• FOLLOW NOC WATER SUPPLY FOR ALL PROJECTS AND DEWA & ADDC APPROVAL
• STUDY SHOP DRAWING & MATERIALS SUBMITTALS AND CHECK IT’S COMPLYING WITH SPECIFICATIONS AND DESIGN DRAWING OF PROJECT BEFORE APPROVAL.
• SUPERVISION THE SITE WORK SUCH AS HVACS, DRAINAGE, WATER SUPPLY, LPG, FUEL HANDLING SYSTEM, BUILDING MANAGEMENT SYSTEM (BMS) & FIRE FIGHTING.
• INSTALLATION OF EQUIPMENT AHU’S, CHILLER’S, CHILLED WATER PUMP, DOMESTIC WATER PUMP, FIRE FIGHTING PUMP, WATER FILTRATION SYSTEM, FCU, CLOSE CONTROL UNIT (CCU) ETC.
• REVIEW ON SITE PROGRESS & WORK PROCEDURE.
• CO-ORDINATE WITH ALL MEP SERVICES & RESOLVES THE PROBLEM AT SITE.
• MANAGED TESTING & COMMISSIONING WORK OF PROJECTS.
• MONITOR ON TESTING & COMMISSIONING OF MEP ACTIVITIES
• MONITORED QUALITY OF MATERIALS & CONSTRUCTION BY REGULAR INSPECTION
PROJECTS WORKED ON AS A DESIGN ENGINEER:
•HATTAN PHASE-2 102-LUXURY VILLAS
•ARABIAN RANCHES 277-LUXURY VILLAS, 285-LUXURY VILLAS594-LUXURY VILLAS
•HATTAN 88-LUXURY VILLAS
•ARABIAN RANCHES 158-LUXURY VILLAS
•SERVICE BUILDING FOR SWIMMING POOL AREA(CHANGING ROOM 277, 285)
•DUBAI LAND 558-VILLAS & G+2 APARTMENTS
JOB RESPONSIBILITIES:
•STUDY AND COMPARE BETWEEN THE LETTER OF INTENT, BOQ, SPECIFICATIONS & TENDER DRAWINGS, AND PREPARING LIST OF ALL VARIATIONS.
•PREPARE MECHANICAL (HVAC, DRAINAGE, WATER SUPPLY & FIRE FIGHTING) DESIGN DRAWINGS IN ACCORDANCE TO THE FINAL ARCHITECTURE & STRUCTURE DRAWINGS, AND IN ADHERENCE TO LOCAL AUTHORITY’S RULERS AND REGULATIONS.
•CO-ORDINATE PLUMBING SERVICES WITH THE ELECTRICAL AND A/C SERVICES, AND PREPARE THE “ABOVE FALSE CEILING” COORDINATED SERVICES, AND THE REFLECTED FALSE CEILING DRAWING.
•PREPARING FINAL SHOP DRAWING AND SUBMIT IT TO THE CONSULTANT FOR THE APPROVAL.
•FREQUENTLY VISITS SITES TO IMPROVE QUALITY OF WORK & TO SOLVE PRACTICAL DIFFICULTIES.
•COORDINATION OF INFRA-STRUCTURE WORK FOR DRAINAGE & PLUMBING TO CONSTRUCTION AREA.
PROJECTS WORKED ON AS A PROJECT ENGINEER:
•DUBAI LAND 558-VILLAS & G+2 APARTMENTS.
•DUBAI LAND SERVICES BLOCK (FIRE FIGHTING PUMP ROOM, DOMESTIC BOOSTER PUMP SUPPLYING 8 NO. BUILDING)
•DUBAI LAND HEALTH CLUB
•ARABIAN RANCHES 17 - LUXURY VILLAS.
•THE LAKES - GHADEER CONSTRUCTION OF 138 NO. TOWN HOMES.
JOB RESPONSIBILITY:
•FINAL CHECKING OF THE PLUMBING & HVAC WORKS PRIOR TO THE CONSULTANT’S INSPECTION.
•ENSURING PLUMBING ADHERENCE TO AUTHORITIES RULES & REGULATIONS.
•COORDINATED ALL MECHANICAL SERVICES WITH THE ELECTRICAL AND CIVIL WORKS.
•RESPONSIBLE FOR DISTRIBUTING MAN POWER TO DIFFERENT SITE ACTIVITIES.
•PREPARE SHOP DRAWING, AS BUILT DRAWINGS, DRAWING AS PER CONTRACT DRAWING FOR CONSULTANT APPROVAL.
•EXPERIENCE IN TAKE OFF MATERIALS & QUANTITY OF MATERIALS AS PER APPROVED SHOP DRAWING.
•EXPERIENCE IN PROCUREMENT OF MATERIALS & PREPARE THE COMPARISON SHEET
Subjects teached:
1. Mechanics.
2. Measurement and Instrumentation.
3. Control System.
4. Smart Machines.
5. Electronics Lab.
6. Measurement Lab.
Job Responsibilities:
1 Assistant Professor
2 Preparing for the sheets and exams.
3 Remarks the exams.
4 Helping the students on their projects).
Subjects teached:
1. Measurement and Instrumentation.
2. Control System.
3. Smart Machines.
4. Electronics Lab.
5. Measurement Lab.
Job Responsibilities:
1 Assistant Professor
2 Preparing for the sheets and exams.
3 Remarks the exams.
4 Helping the students on their projects
to follow up the production line & machines
ADDITIONAL: ATTESTED AND EQUIVALENCY CERTIFIED FROM UNITED ARAB EMIRATES MINISTRY OF HIGHER EDUCATION & SCIENTIFIC RESEARCH
