Piping/ Pressure Vessel Inspector
Danamin
مجموع سنوات الخبرة :11 years, 0 أشهر
Job roles:
- Provide integrity support for static equipment
inspection throughout company areas of operation to ensure all process, utility and associated plants operate safely, efficiently & reliably. Static equipment comprises pressure vessels, heat exchangers, on plot pipework, flowlines, and relief.
- Perform inspection tasks and schedule monitoring programs to assure the mechanical integrity of the equipment.
- Familiarizing with prior history of the equipment and piping, reviewing the piping and equipment prior inspection results, prior repairs, and current inspection plan;
- Perform internal inspection of vessels in accordance with the inspection plan;
- Determine the corrosion rates, remaining life, and next inspection date for each piping and equipment
- Review and update the inspection and NDE techniques required for each equipment, including the extent and locations of inspection and NDE;
- Ensure all NDE results are evaluated and determined to be accepted or rejected, with recommendations to resolve all deficiencies.
- Review and update the surface cleaning requirements needed for inspection and examinations;
- Ensuring that all local jurisdiction regulations are followed, including completing all forms, data sheets, and reports.
Project Involved:
- Piping Inspection Program for PETRONAS RBI Turnaround 2022
- Piping Inspection Program/ CUI/ Super Critical Program for PETRONAS RBI 2019 - 2022
- Authorized Pressure Vessel Inspector Level II for PSR-2 & MG3 MRCSB - PETRONAS Refinery Turnaround 2019
- Emery Oleochemicals EOS & ESE Plant Inspection - TA 2019
Job roles:
- Provide integrity support for static equipment
inspection throughout company areas of operation to ensure all process, utility and associated plants operate safely, efficiently & reliably. Static equipment comprises pressure vessels, heat exchangers, on plot pipework, flowlines, and relief.
- Perform inspection tasks and schedule monitoring programs to assure the mechanical integrity of the equipment.
- Familiarizing with prior history of the equipment and piping, reviewing the piping and equipment prior inspection results, prior repairs, and current inspection plan;
- Perform internal inspection of vessels in accordance with the inspection plan;
- Determine the corrosion rates, remaining life, and next inspection date for each piping and equipment
- Review and update the inspection and NDE techniques required for each equipment, including the extent and locations of inspection and NDE;
- Ensure all NDE results are evaluated and determined to be accepted or rejected, with recommendations to resolve all deficiencies.
- Review and update the surface cleaning requirements needed for inspection and examinations;
- Ensuring that all local jurisdiction regulations are followed, including completing all forms, data sheets, and reports.
Project Involved:
- Inspection of Static Equipment for DOSH CF (Certificate of Fitness) Renewal and Hygienic Cleaning, PSR-1 & Pit Stop Petronas Refinery MRCSB Turnaround 2018
- Piping Inspection Program for PETRONAS RBI 2016 - 2018
Job roles:
- Interpretation of inspection findings to guarantee fit for service condition of the flowline’s piping, prior any permanent or temporary repairs.
- Liaise with sub-contractor and sub-vendor/supplier and also with client side like Subsurface, Well, Production & Integrity team in order to deliver work successfully and safely as per
project requirement.
Project Involved:
- Flowlines & Gaslift Rejuvenation for Enquest’s Field (Idle Well Restoration)
Job roles:
- Prepared initial project planning (workpack, WOP,
procedure), material selection and ordering (PR, TBE) base on project scope of work included preparation of tools, equipment, and consumables
- Monitor & updated Progress Measurement System (PMS) during offshore execution work on daily basis for reporting purpose
- Construction Assistance: to provide plan and supervision for execution on the construction part with Construction Supervisor/ General Supervisor on board during execution work
- Review inspection report prior piping repairing or replacement.
Project Involved:
- Provision of Hook Up Commissioning & Topside Major Maintenance for Enquest (SD Campaign): Cross Over Line V120/ V125, V150 Vessel Clean Out, Metering Valve Change Out, SeB Production Riser Inspection Workscope, Replacement of
Production Barred Tee Spool, Onshore Fabrication for FMM
- Piping/ Wrapped Line Change Out.
- Seligi A Enquest’s Field Production Liquid Custody Metering Upgrade
- Rectification work for Ex Electrical & Instrument equipment Integrity inspection finding for Kebabangan Northern Hub Development Project (KPOC)
- Provision of Hook-Up and Commissioning Services for Kebabangan Northern Hub Development Project (KPOC)
- Provision of Hook-Up and Commissioning Services for Patricia Satellite PT-SA & West Patricia WP-PA (Tie In) Topside Facilities for Murphy’s Sarawak SK309/SK311 SPSA Development Project
- LOPC Campaign (Blasting & Painting work)
Job roles
• Prepared initial project planning (workpack, WOP, procedure), material selection and ordering (PR, TBE) base on project scope of work included preparation of tools, equipment, and consumables
• Maintenance Assistance: to provide plan and supervision for execution on the maintenance/ installation part with technician.
• Inspection and preventive maintenance of switchgear/ Motor Control Centre (MCC)
• Monitor switchboard replacement, thermography survey, Air circuit breaker retrofit & Coriolis meter replacement.
List of Project Involvement
• Provision of Hook Provision of Major Inspection and Maintenance services for High Voltage / Low Voltage Switchgear and Motor Control Centre for PETRONAS Carigali Sdn. Bhd (SKO/SBO)
- Switchgear/motor control centre (MCC) preventive maintenance at BAKP-B, BAK-B, BAJT-H, PC4DP-A, TKQA, D35Q-A, D35PG-A
- D35Q-A and D35PG-A transformer oil top up (TF-407, TF-408, TF-409, TF-410, TF-438 & TF439) & right angle bushing installation (TF-438 & TF-439)
- BEP-A switchboard replacement and installation
- Low voltage switchboard replacement at BEP-A
- High voltage junction box replacement at BNG-B
- Vacuum circuit breaker replacement at BNG-B
- Low voltage switchrack Replacement at D35-DP-A
- Thermography survey at TKQ-A.
- Air circuit breaker retrofit at D35-Q-A
- BOK-A cleaning and health check on the LCP & JB (GEG-7710 & DEG-7720)
- Replace new coriolis meter UT 9792 NOC BARAM at MCOT
B. Eng. (Hons) in Electrical Engineering (Industrial Power) Activities; The Institution of Engineers, Malaysia (IEM) & The Board of Engineers Malaysia (BEM) Membership Drive Day - attended Student Association Faculty of Electrical Engineering - Committee member 7' side football tournament between faculty - participated Technopreneur Development seminar UTEM 2009 - Committee member