Bryan Philip Balababa, QC ENGINEER CIVIL / ARCHITECTURAL

Bryan Philip Balababa

QC ENGINEER CIVIL / ARCHITECTURAL

Royal Commission for Jubail and Yanbu

البلد
المملكة العربية السعودية - الجبيل
التعليم
بكالوريوس, Architecture Del Remedio San Pablo City
الخبرات
5 years, 9 أشهر

مشاركة سيرتي الذاتية

حظر المستخدم


الخبرة العملية

مجموع سنوات الخبرة :5 years, 9 أشهر

QC ENGINEER CIVIL / ARCHITECTURAL في Royal Commission for Jubail and Yanbu
  • المملكة العربية السعودية
  • أكتوبر 2011 إلى ديسمبر 2013

Fax No. +966 3349 3297
Email: www.tasami.com.sa

POSITION: QC ENGINEER ARCHITECTURAL / CIVIL
DUTIES AND RESPONSOBILITIES:
● Preparing Inspection Test Plan (ITP), request for Inspection (RFI), Holdpoint, Material Inspection (MIR) and Daily QC Report
●Check and review the plans, B.O.Q.& specifications for the proper construction & quality implementation at job site, perform pre-inspection to ensure that all installed materials are within the standard in conformance to applicable drawings & specs., conduct final inspection with RC representative prior to proceed concrete pouring and other succeeding work activities that requires step by step inspection as per inspection and testing procedures (I.T.P.), render monitoring and surveillance on site to control the quality of work being implemented by the construction group
●to ensure that all execution and inspection are carried out as per inspection plan / drawings / codes & specifications. To carry out inspection & certify all necessary inspections during various stages of site activities as per approved inspection and test plan. To coordinate with client and supplies and consultant for site inspection activities.
● Prepare list procurement inspection criticality for various items and prepares audit schedules and vendor quality requirements. Review / approve supplier / sub-contractor quality plans, review and approve project material certification, Review and approve supplier / subcontractor data reports.
Establish proposed quality and reliability expectancy of finished product and direct inspectors over testing activities.
●Conduct Pre-Inspection on all structure form substructure to superstructure on the layout of rebar, shuttering, water proofing materials, including coordination with Electrical & Mechanical approvals prior to concrete pouring and verify the survey layout and reference levels to ensure the structure is built according to IFC plan

PROJECT INVOLVEMENT: • CONSTRUCTION OF SCHOOLS (BOYS SECONDARY/ GIRLS INTERMEDIATE/ BOYS
ELEMENTARY, AND KINDER GARTEN 1 & 2
Contract No.: 627-C18
Client: Royal Commission for Jubail and Yanbu
Location: JALMUDAH - PHASE 3, JUBAIL, KSA
Inclusive Date: October 2011 to December2013


POSITION: QC ENGINEER CIVIL / ARCHITECTURAL
BUILDING CONSTRUCTION COMPANY
Al Khobar - Dhahran St.5th floor No. 40 C.R. 2051023581
P.O. Box 30730 Al Khobar 31952, Saudi Arabia
Tel No. 8961199/8946868 / 8690862
Fax No. 8995757
Email: Info@bcc-sa.com

DUTIES AND RESPONSOBILITIES:
● Preparing Request for Inspection (RFI), Holdpoint, Material Inspection (MIR) and Daily QC Report
● Make a inspection for the New Delivered Materials if its approved or with proper protection
●Conduct Pre-Inspection on all structure form substructure to superstructure on the layout of rebar, shuttering, water proofing materials, verify mechanical and electrical openings if necessary and require mechanical & electrical inspection and approvals prior to concrete pouring and verify the survey layout and reference levels to ensure the structure is built according to IFC plan
● Witnessing the Implementation/ Execution at the site including Pouring of Concrete, Survey Works and various kinds of test
●Provide technical inputs for vendor queries, conformance reports and non-conformance reports. Review vendor queries, CR (Conformance Reports), NCR (Non Conformance Reports) for possible resolutions and analyze fitness to purpose. Provide necessary recommendations that need to be forwarded to the client
●Review contract documents to ensure identification and comprehension of quality requirements.
●AUTOCAD Designer-ARCHITECTURAL Review of plans/drawings based on design drawings,
technical specifications and other client's requirements in coordination with Architect/ Engineer

PROJECT INVOLVEMENT: • Construction of 110 Residential Villas (VILLAGE 1 & 2)
Contract No.: AKL - 001

في Royal Commission for Jubail and Yanbu
  • المملكة العربية السعودية
  • نوفمبر 2011 إلى يونيو 2012

Client: Royal Commission for Jubail and Yanbu
Location: Al-Sinaah & Al - Fanateer Jubail, KSA
Inclusive Date: November 01, 2011 June 15, 2012

في EMAAR DEVELOPMENT CORPORATION
  • يونيو 2010 إلى أكتوبر 2011

Client: EMAAR DEVELOPMENT CORPORATION
Location: Al Khobar, KSA
Inclusive Date: June 05, 2010 to October 31, 2011
• Procurement & Construction of City Plant Nursery
Contract No.: 087 - C06

CAD DESIGNER في TNA BUILDERS
  • فبراير 2009 إلى مارس 2010

TNA BUILDERS
February 6, 2009 to March 5, 2010
Zone 1, Sto. Niño St. San Felipe, Naga City
PROJECT: SSS Sorsogon Branch, Mother Seton Hospital (renovation)

POSITION: CAD DESIGNER / 3D RENDERER
DUTIES AND RESPONSOBILITIES: ● 3D Visualiser / Renderer (3D Max & Sketch Up) Mental Ray & V ray Render
● Proposed Design Interior/Exterior (3D Perspective)
● Analyzes layout to coordinate each utility based on the available drawings in AutoCAD format to produce combined services and builders work drawings
● Review Field Change Report / As Built Condition being proposed for the construction department. ● Review Drawing and Specification and check on site construction for proper implementation in conformity to the contract & Coordinate to the other trades before proceed further.
JAMAICA REALTY & MKTG. CORP AVP FOR BICOL OPERATION

CAD OPERATOR في Phoenician Building, Panganiban Naga City
  • يناير 2008 إلى ديسمبر 2008

January 11, 2008 to December 23, 2008
Phoenician Building, Panganiban Naga City
PROJECT: Caceres Heights Hotel &Subdivision, Jamaica Mansion
POSITION: CAD OPERATOR
DUTIES AND RESPONSOBILITIES:
● Ensure completion of shop drawings and specifications by properly coordinating with CAD operators and other support staff
● Review Field Change Report / As Built Condition being proposed for the construction department.
● Proposed Design Interior/Exterior (3D Perspective) Using AutoCAD, Adobe Photoshop
● Preparation of daily accomplishment report and monitoring report. ● Built Plan Drawing

الخلفية التعليمية

بكالوريوس, Architecture Del Remedio San Pablo City
  • في POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
  • يناير 2009

Specialties & Skills

ARCHITECTURAL
AUTO CAD
AUTOCAD
CONCRETE
ELECTRICAL INSPECTION
ENGINEER
FINAL INSPECTION
INSPECTION
INSPECTIONS