Cristito Mata

Supervised the construction excavation works, backfilling and compaction test, waterproofing formation level, driving piles and isolated footing, in-charge of installation scaffolding, formworks, laying of block and other items related to civil, structural and architectural works.
• Follow up the supplier and independent laboratory for QA/QC reports and tests results and prepare complete package prior to offering for consultant’s inspection.
• Prepare manpower and equipment schedule for particular site
• Review all drawings and specification related to civil and structural.
• Proposed excellent idea which will create solution to problem.
• Review proposal submitted by sub-contractors as a remedial measures in case problem arises.
• Prepare report on schedule of work in advance and accomplishment of project
• Raised/Prepared Inspection Request and Request for Information to consultant time and location of inspection.

• Monitor QA/QC activities at site for all civil works for Air Traffic Control and Meteorological Specific Equipment facilities CP-35 in NDIA (New Doha International Airport).
• Prepare material submittals for client/ consultant approval as per the project specifications and drawings prior to the procurement of materials.
• Raised/Prepared NFI (Notice for Inspection) consultant time and location of inspection under Overseas Becthel International Consulting Co.
• On daily basis visit the work site and check, monitor and make sure the work done is in compliance with project approved QA/QC plan.
• Prepare and maintain QA/QC and material approval logs.
• Follow up the supplier and independent laboratory for QA/QC reports and tests results and prepare complete package prior to offering for consultant’s inspection.
• Promote safe site working practices with working items.

• Monitor QA/QC activities at site for all Civil works and architectural finishing of Building Tower Project (P1+P2+GF+24th Flr.+R1+R2+R3)
• Supervised the GRC Pre-cast and Dome erection.
• Monitor materials delivery and erection schedule for pre-cast and GRC.
• Responsible for the preparation of material submittals for client/ consultant approval as per the project specifications and drawings prior to the procurement of materials.
• Ensuring that all personnel to be fully aware with quality requirements and application for all quality documents as relevant to their disciplines.
• Monitor laying of CMU, plastering, waterproofing, excavation, compaction test (FDT), formation level, steel reinforcement, wood works, ceiling works (gypsum ceiling), floor finish (tiling works and stone marble), painting works and other items related to civil, structural and architectural works, etc.
• Follow up the supplier and independent laboratory for QA/QC reports and tests results and prepare complete package prior to offering for consultant’s inspection.
• Raised/Prepared Inspection Request and Request for Information to consultant time and location of inspection.
• Monitoring for sub-contractor daily activities to ensure within project plans and specification.
• Prepared daily site progress report activities for office files and record.

• Supervised the construction of all facilities CP-15 in NDIA (New Doha International Airport) Employee Mosque, Employment Canteen, North and South Sea Rescue, Main Security, Medical Center (4 Storey Building), Administration Building A & B ( 208 Bored Pilling).
• In-charge of lay-out both vertical and horizontal grid line.
• In charge laying of CMU, plastering, waterproofing, excavation, compaction test (FDT), formation level, steel reinforcement and other items related to civil, structural and architectural works. etc.
• Check the setting out, alignment, rigidity and material quality prior for execution.
• Prepare the work schedule activities one month advance.
• Supervised and assist of construction of Labour Camp 2 (450 Porta Cabin and Facilities)
• Prepare manpower and equipment schedule for particular site.
• Raised/Prepared NFI (Notice for Inspection) consultant time and location of inspection under Overseas Becthel International Consulting Co.
• Promote safe site working practices with working items.
• Review all drawing plans, ITP's, MS (Method of Statement) and Specification as per requirements.
• Liaison to Procurement Manager regarding the approved Materials and MSDS (Materials Safety Data Sheet).
• Liaison to Construction Manager and Section Engineer arrange requirement schedule for both construction materials, utility materials and proposed excellent idea.
• Liaison with Surveyor and Office/Interface Engineer.
• Coordinate and supervised the work of all structural activities and operation
• Request necessary equipment for pile driving and concrete pouring
• Supervised site casting of concrete and pile driving.
• Prepared daily site progress report activities for office files and record.
• Final Handing Over to Client of the 32 Building's and Mosque of Hamad Medical Center Villages/Athletes Village Project.
• Attending weekly meeting with consultants to update progress of works.

• In-charge of lay-out both vertical and horizontal grid line.
• Form installation and concrete pouring.
• In charge finishing works such as, block laying, plastering, tile and marble installation, ceiling, painting partition walls, cabinet installation, waterproofing, painting, excavation, compaction test (FDT) steel reinforcement and other items related to architectural, civil and structural works. etc.
• Prepare manpower and equipment schedule for particular site
• Review all drawings and specification related to civil and structural.
• Proposed excellent idea which will create solution to problem.
• Review proposal submitted by contractors as a remedial measures in case problem arises.
• Prepare report on schedule of work in advance and accomplishment of project.
• Interior Design and Estimates.
• Drafting AutoCAD (2d and 3d modeling) and Photoshop 7.0.

• Supervised of Construction of 142 Villa's
• Supervised from the lay-out of the structures
• Prepare manpower and equipment schedule for particular site
• Locate the limits boundaries and excavation
• Reinforcing bars and forming installation for concrete pouring
• In-charge laying of CHB, wall finishing and floor finish
• Prepared scheduling in project and progress report.
• Compound In-Charge for Clubhouse and Villa's
• Interior Design and Estimates
• AutoCAD Operator ( 2D and 3D Rendering )
• Drafting (AutoCAD and Photoshop 7.0 )

• Design Aid (Design and Planning Section)
• Drafting (AutoCAD, Photoshop)
• MS Office (MS Excel, MS Word, MS PowerPoint)
• Surveying (Topographic, Profile Leveling, Closed Traverse)
• AutoCAD Operator (2D, 3D & Rendering)
• Microsoft Project
• Preparation of Technical Reports

• Design and Estimates
• Drafting (AutoCAD, Photoshop)
• MS Office (MS Excel, MS Word, MS PowerPoint, MS Project)
• Microsoft Project
• AutoCAD Operator (2D, 3D and Rendering)
• Surveying (Topographic, Profile Leveling, Closed Traverse)
• Preparation of Technical Reports

• Supervised Construction of a 3-Storey School Public Building
• In-charge of lay-out, reinforcing bars, installation of slip forming.
• Supervised of structural I-beam settings
• Check of the electrical and mechanical embedment items as per plan.
• Prepared of progress report and weather chart monitoring.
• AutoCAD Operation (Structural Details Plan)
• Estimate and Surveying

• Design and Estimates
• Surveyor (Profile leveling and Closed Traverse)
• AutoCAD Operator