Construction Project Manager
Sarralle Group
Total years of experience :31 years, 5 Months
Managed and directed engineering, manufacture, dismantling old installations, building
structure wet slag recovery plant and installation of a new plant (more competitive and respectful with the environment) on PHOENIX - Acerinox activities, Inspected and accepted third-party workshop commissions, preserved, and improved in facilities to increase performance. Conducted a Hazard and Operability (HAZOP) study at the new Crushing Plant on PHOENIX- ACERINOX (Steel industry)
Select Contribution
• Ensured contract compliance and enforced established quality controls, procedures and HSEQ
• Made sure the engineering and construcion tasks occurred within the schedule and budgeted person-hours
• Subcontract Management
Checked the client’s practices and standards to identify ‘unusual requirements.’
• Made sure the engineering tasks occurred within the schedule and budgeted person-hours.
• Inspected and approved contractor and supplier commissioned workshop tasks
Managed and directed engineering, construction and maintenance activities - onshore and offshore. Inspected and accepted third-party workshop commissions, preserved, and improved in facilities to increase performance. Conducted a Hazard and Operability (HAZOP) study at the new Ethylene Oxide Chemical Industry (IQOXE) facilities. Assessed the performance of rotating equipment and static equipment, piping, and package units, water treatment
Select Contributions:
• Ensured contract compliance and enforced established quality controls, procedures and HSEQ
• Subcontract Management
Checked the client’s practices and standards to identify ‘unusual requirements.’
• Made sure the engineering tasks occurred within the schedule and budgeted person-hours.
• Proficiently executed start-up activities and assembled new facilities and earned bonus money.
• Inspected and approved contractor and supplier commissioned workshop tasks.
Managed, and organised engineering, construction and maintenace activities ( onshore and offshore ) for the customer, CLH. Performed a Hazard and Operability (HAZOP) study. Synchronised safety and prevention activities, approved subcontractor and subcontractor projects, and supervised 500+ employees. Ensured compliance with contractual requirements, implemented agreed-upon procedures and quality controls. Identified any ‘unusual requirements’ in the client’s initial standards and practices.
Select Contributions:
• Competently completed the project on time and budget, with less than the necessary employees and without incidents or accidents.
• Subcontract Management
• Issued the prepared scope of work, engineering tasks, and technical equipment specifications.
• Reviewed and verified the project design integration, interface controls, and the equipment supplier’s compliance with the project requirements and international standards.
• Audited contractors and subcontractors weekly—including workshops, warehouses, offices—checked documentation compared to the supply of materials, quality, and safety.
• Installed new equipment, increased facility performance (rotary, static, tanks, oil terminal, onshore and offshore pipeline), and performed all commissioning - onshore and offshore
Studies and Applied Engineering 21 (EIA xxii)
•Costumer REPSOL Tarragona
•Ensuring the compliance with contract requirements, the implementation of the established procedures and quality controls
•Coordinating and managing HSE
•Hazard and Operaibility - HAZOP
•Checking the Client’s standards and practices at the beginning of the job to highlight any “unusual requirements’
•Calculate, technical sheet, performance comparison - rotating, static equipment piping, package unitsPreparation and issue of Project Job Specifications
•Ensuring that the engineering activities be carried out within the established time schedule and the budget manhours allocated for the job
•Preparation of Equipment Technical Specifications, such as Material Requisition and Mechanical Data Sheets, for Enquiry of L.L.I. & Critical equipment
•Technical comparison and conditioning of bids for compliance with requisition and applicable standards
•Final technical evaluation to support order placement
•Review and verification of equipment supplier’s engineering for compliance to Project requirements and International Standards, integration within project design and for control of interfaces
•Planning and organization
•Managing, coordinating and control, engineering and construction activities
•Control (budget, times, planning), contractors, subcontractors
•Inspection and accept the work commissioned to the suppliers or contractors, in their workshops
•Maintenance and improvements 8in facilities - old equipment (cleaning, repairs), improvements - installation of new equipment (rotary, static, tanks, valves, new pipe rack) - to increase the performance of the installations
•Control: pre-commissioning, commissioning, startup, production
Project MSPP (
Project: Extension Refineries (Sohar, Mina Al Falaj), airport, and a new hydrocarbons deposit. Connected the refineries, the airport, the hydrocarbon deposit andoil tanker docking terminals . Conducted a HAZOP study for construction and expansions. Modified plans, notified the client of changes, defined engineering assignments, construction, industrial planning, and organisation. Met and negotiated with the client, contractors, subcontractors, and suppliers and managed all construction, health, and safety concerns.
• Changed the project design due to engineering failures or at the request of the client.
• Arranged civil, electrical, mechanical, piping, water treatment - industrial and potable, onshore and offshore pipelines, dock, tie-in, and structural engineering.
• Modified plans, notified staff of changes, coordinated engineering and construction activities.
• Reviewed a new edition of API Standards and updated departmental engineering standards.
• Subcontract Management
• Reversed a previous contractor’s six-month delay to one month recovered during pre-commissioning, and commissioning.
Russian Federation) - Hydrogen, Hydrocracker, Sulphur
•Planning and organization, control (cotes, times, subcontractors)
•Installing, preservation, maintenance and pre commissioning- Rotating Equipment (pumps, compressors - alternative, rotary, screw, disassembly, repair and assembly of mechanical seals - liquid, dry gas blower, gas and steam turbines), Static Equipment ( cracking towers, heaters, pre heater, boiler), HVAC, Fire fighting system
•Pre-commissioning and commissioning
- January2016 -
planning and organiza6tion, negotiation with the: client. Contractors and subcontractors, supplier, control (cotes, times, subcontractors)
•Calculate, technical sheet, performance comparison - rotating equipment
•And static equipment
•Hazard and Operaibility - HAZOP
•Engineering Oil & Gas, Power
•Managing, coordinate and control design teams
•Project Manager and Senior construction manager -engineering, construction and startup- CTCC (Combined Cycle Power Plant) Montoire de Bretagne- France
• Project and Site manager -engineering, construction and start up - Sulfur plant expansion PETRONOR / Bilbao
•Project Manager and Senior Construction Manager - engineering, construction, star up and maintenance CTCC (Combined Cycle Power Plant) Plana de Vent "Vandellos"
•Engineering- Power, Oil & Gas
•Project Manager- Engineering and Construction Manager-FV plant (town hall- Vandellos) 5MW . Engineering, construction Start up.
•Site Manager -Diesel engine Power Plant 50Mw ( Reunion Islands- France)
•Ensuring the compliance with contract requirements, the implementation of the established procedures and quality controls
•Checking the Client’s standards and practices at the beginning of the job to highlight any “unusual requirements”
•Preparation and issue of Project Job Specifications
•Ensuring that the engineering activities be carried out within the established time schedule and the budget manhours allocated for the job
•Preparation of Equipment Technical Specifications, such as Material Requisition and Mechanical Data Sheets, for Enquiry of L.L.I. & Critical equipment
•Technical comparison and conditioning of bids for compliance with requisition and applicable standards
•Final technical evaluation to support order placement
•Review and verification of equipment supplier’s engineering for compliance to Project requirements and International Standards, integration within project design and for control of interfaces
•Inspection and construction support
• Installation and commissioning
•Review of new Edition of API standards and up-dating of Department Engineering Standards
-
-
Oil & Gas
•Calculate, technical sheet, performance comparison - rotating, static equipment, ping, package units
• Hazard and Operaibility - HAZOP
•Coordinating and managing the Installation, preservation and maintenance - CLH : rotating ( pumps, gas turbines, steam turbine, blower, compressors - alternative, rotary, screw, disassembly, repair and assembly of mechanical seals - liquid, dry gas), static equipment ( heaters, boiler, tower, pre heater ), firefighting system, pipeline, valves
•Coordinating and control design team.
• system, HVAC, purifying groundwater layers)
•Installing new pipeline and racks
•Construction of new Storage Tanks
•Pre-commissioning, Commissioning and start up
•Ensure the project deliverables are issued in accordance with the specified design and quality standards.
•Prepare construction activity progress reports.
•Ensure técnico co-ordination with client and designers.
•Review technical design submittals.
•Assist with the evaluate, negotiates and approves contract changes;
•Administer Construction contracts including chairing regular progress meetings, maintaining records, with the Client and Contractor and various other stakeholders.
•Review construction schedule updates, progress payment schedules, etc.
Oil & Gas
•Calculate, technical sheet, performance comparison - rotating equipment
And static equipment
•Coordinating mechanical and electrical team for maintenance, preservation and installation : rotating equipment( pumps, compressor, gas turbine, steam turbine, blowers, diesel engine power plant ), stating equipment ( towers, exchanger, heate8rs, pre heaters boilers, tanks), pipeline, hydraulic, pneumatic test, firefighting system, electrical system; in REPSOL; CEPSA
Pharma) - general maintenance section chief
•Hazard and Operability - HAZOP
•Calculate, technical sheet, performance comparison - rotating equipment and static equipmet
•Preventive, corrective, capital maintenance and preservation - rotating (pumps, turbines, compressors, diesel engine power plant), Static (tanks, boilers, distillation towers, exchangers ), piping, valves
•New facilities
•After tracing the repaired equipment (Machinery, piping, static), or the new facilities, it was always responsible for operational tests, commissioning, startup
•Planning and industrial organizations, negotiation and meeting with the: client, contractors and subcontractors, suppliers
• Control (costs, times, respect the planning)
-
teams of mechanics, electricians, instrumentation - maintenance - rotating ( pumps, turbines, blower, compressors - alternative, rotary, screw, disassembly, repair and assembly of mechanical seals - liquid, dry gas) static equipment ( pre heaters, heaters, boiler, tower), storage tanks, , installing or change pipelines, pipe rack, change and repairs valves ( hydraulic, pneumatic, manually), preservation, pre-commissioning, commissioning, for repaired equipment, or new installations: Hydrocracker, Sulphur, Hydrogen, Cocker, Diesel Engine Power Plant
Coordinating the teams, for the correct execution of maintenance and assembly of new equipment; installing, preservation and maintenance - rotating ( pumps, turbines, blower, compressors - alternative, rotary, screw, disassembly, repair and assembly of mechanical seals - liquid, dry gas ) static equipment ( pr heaters, heaters, boiler, tower), storage tanks, , installing or change pipelines, pipe rack, change and repairs valves ( hydraulic, pneumatic, manually): Hydrocracker, Sulphur, Hydrogen, Cocker.
Mechanical Engineering Study
on 04-09-2007 •Admitted to the College of Industrial Engineers of Tarragona
on 04-09-2007 •Admitted to the College of Industrial Engineers of Tarragona
URL removed due to policy violation. Please contact support for further information.