Machinist | Mechanical Technician
Engie Dhuruma o & m Company
Total years of experience :31 years, 4 Months
To be a part of an organization where there are challenging Projects, Complex assignments, Team work, Career development and where knowledge is utilized and enriched to grow professionally by sharing technical and analytical skills through dedicated efforts while contributing my best to the organization
JOB DISCRIPTION
Maintenance of Boilers Heat Recovery Steam Generators (HRSG - 7 No s) and their Auxiliaries.
Maintenance and overhauling of various pumps like Boiler Feed Pumps (HP BFP’s & LP BFP’S) Condensate Extraction Pumps, Vertical Pumps (KBL Make) etc.
Maintenance of oil bath heater, water bath heater
Maintenance of water treatment plants (D.M Plant, ETP & PTP).
Maintenance of Cooling Tower Fans. Air cooled condenser
Maintenance of various Valves.
Maintenance of ccw fin fan cooler, ccw pump
Dial gauge Alignment
Gas Cutting & Welding Works
Random repair product being produced under Engineering parts such as gate valve, global valve, ball valve, control valve, safety valve, relief valve.
Performs several types of machining jobs such as turning of shafting, facing, re threading of bolts, pipe threading, drilling holes, re-boring, making nuts, bushings, pulleys, maintenance of machines part and other repair jobs coming from the different section.
Analyzed work based on drawings, plane design and actual basis of repair product.
Develops and initiate proper procedure and ideas regarding the smooth flow of designed product and related job repair before actual proceeds.
Reports to the section Supervisor any abnormalities found within areas of responsibilities
FIRST NATIONAL OPERATIONS AND MAINTENANCE COMPANY (NOMAC)
March 2009 to PRESENT
MACHINIST
COMPANY PROFILE
NOMAC - First National Operation and Maintenance Co. Ltd., is a main contractor of SWEC - Shuiabah Water and Electricity Co. The company is responsible for the desalinating sea water, in order to augment the supply of potable water to coastal and inland cities of the Kingdom. SWEC is the largest desalination and second electric power producer in the Kingdom located approximately 110 Km south of Jeddah. NOMAC is responsible for the Operation and Maintenance of the three (3) boilers with the capacity of 2016 ton/hr and three (3) Turbines with capacity of 398 MW each and desalination of 82, 000 cubic meters per day, Water Treatment Plant, fire-fighting pump house, ESP, Flue gas desulfurization, and Reverse Osmosis Plant.
Job Description:
• Involves in repairing, machining and fabrication of parts of the mechanical components and equipment.
o Force Draft Fan
o Sealing Cooling Air Fan
o Soot Blower System
o Fuel and Diesel Oil Firing System
o SCAPH (Steam Condensate Pump)
o Boiler Sump Pump
o Safety Valve (Lapping, Adjusting and Testing
o MOV (Actuators) Valves - AUMA
o Manual, Pneumatic Control Valve-Stem, Gland Pusher, Guide Bush, Disc, Seat
o Chemical Dosing Pump
o Motor - Bearing Housing, Stator, Commutator
o Pumps Shaft - Checking Round Out, Straightening, Shaft Rebuild and Fabrication of New Shaft.
o ESP (Electro-Static Precipitator) Vibrator
• Random repair product being produced under Engineering parts such as gate valve, global valve, ball valve, control valve, safety valve, relief valve.
• Fabrication and modification, spindle rod for LAE, cylinder rod for gate valve, bushing, all kind of fittings, mechanical seal.
• Performs several types of machining jobs such as turning of shafting, facing, re threading of bolts, pipe threading, drilling holes, re-boring, making nuts, bushings, pulleys, maintenance of machines part and other repair jobs coming from the different section.
• Analyzed work based on drawings, plane design and actual basis of repair product.
• Develops and initiate proper procedure and ideas regarding the smooth flow of designed product and related job repair before actual proceeds.
• Reports to the section Supervisor any abnormalities found within areas of responsibilities.
ARIFCO PLASTIC FACTORIES CO., LTD.
December 15, 1992 to January 2009
MOULD MAKER AND MACHINIST
Job Description:
• To ensure that mould design is being met or in accordance with the customer's production requirements and developed new product.
• Random repair of products being produced under /engineering parts such as propeller, impeller, front panel, bellmouth, fan condenser, blower wheel and other relevant plastic parts for air-conditioning and refrigeration units.
• Fabrication of moulds, press dies, jigs, tools and other special machine parts used in production-injection line.
• Performs several types of machining jobs such as turning of shafting, facing, threading bolts, pipe threading, drilling holes, re-boring, making nuts, bushing, pulleys, maintenance f machine parts and other repair jobs from other section.
• Analyzed works base on drawings, plane design and actual basis of repair product if available based on production complaint.
• Develops and initiate proper procedure and ideas regarding the smooth flow of the designed mould and related job repair before actual proceeds.
• Reports to the section Supervisor of any abnormalities found within the area of responsibilities.
TIG WELDER
Job Description:
• Welding of repaired parts for temporary operation of the said spare parts with full operation and guaranteed satisfaction.
• Fabrication of screws in extrusion machine (Arifco Pipe Factory), threading and polishing. Testing and processing necessary adjustment and modification on the screw of extrusion machines after actual operation.
ASSISTANT FOREMAN
(TOOL & DIE ENGINEERING DEPARTMENT)
Job Description:
• Dealing in the fabrication of moulds, press dies, jigs, tools and other special machine parts used in production line
• In-charge for fabrication of plastic and die casting mould used for inside and outside products.
• Perform several types of machining jobs such as tunning of shafting, facing, threading of bolts, pipe threading, drilling holes, re-boring, making nuts, bushing, pulleys, maintenance machine parts and other repair jobs coming from different section.
• Analyze work be means of blue print, drawings, plane design specially in the fabrication of moulds and dies.
TYPES OF MACHINE AND EQUIPMENT USED:
• Lathe Machine
• Band Saw
• Shaper Machine
• Planer Machine
• Radial Machine
• Bench Drill Press
• Surface Grinder
• Cylindrical Grinder
• Power Hack Saw
• Milling Machine (Vertical & Horizontal)
• Furnace Heat Treament
• Electric Welding and Oxy-Acetylene
• Electric Discharge Machine (EDM)
MEASURING INSTRUMENTS AND DEVICES USED:
• Outside and Inside Micrometer
• Vernier Caliper
• Steel Rule
• Depth Gauge
• Height Gauge
• Dial Gauge
• Radius Gauge
• Thread Gauge,
• Protractor
• Divider
• Tri-square
• Inside and Outside Caliper
• Rotary Table
• Dividing Head
I certify that all the details stated herewith are true to the best of my knowledge.
Applicant
I will take the basic, how to operated the lathe machine ,horizontal & vertical milling machine,surface grinding machine, boring machine.cylindrical grinding machine and also basic to study of arc welding and tig welding machine.