Senior Engineer-SAS
Parsons - Qatar
مجموع سنوات الخبرة :16 years, 3 أشهر
Dec 2021 - Present, Parsons International, Doha, Qatar.
Senior Engineer- PMC (SAS):
Hamad international airport project.
HIAEPSC/0007: PIDPS & MOI Network (Construction)
Conduct review and approval of shop drawings, Material Submittals, Vendor prequalification’s, Method of statement, As Built drawings, calculations, schedules, training manuals, spare parts, warranty, Operation and Maintenance manuals, etc.
Review of Quality Plan, ITP and T&C Procedures.
Review daily, weekly / monthly quality reports of the project.
Raise NCR to the contractor for any unapproved design/or materials installations.
Inspect the materials and hardware installation and T&C though out the construction phase.
Review and attend FOR (failure observation report) and inspect the delivery note materials.
Coordinate with MOI (Ministry of interior) for the technical review of security design and conduct workshop review to finalize the commented documents.
High capability to chase closely with contractor and provide guidance to close any design or site related issues while following infrastructure project schedules and codes.
Perform engineering, designing and solution activities within contract documents. Example: Scope of work, technical/project specification, internationals and local standards codes.
PIDPS & MOI Network (Engineering & Construction)- Hamad International airport
QTCT2 project -Hamad port .
Hamad International airport Project
HIA approved for Senior Telecom Engineer, Senior Security system Engineer & Lead Engineer
Review Engineering deliverables in all design stage (30%, 60%, 90%, IFC, Redline, as built drawing) including pre-construction Phase, field change requirement.
Providing comments to Contractor (LYSYS) in different design phases and generate a report for official submittal.
Coordinating with discipline Engineers to review discipline engineering documents (including Method of documents, drawings), and close out the comments with LYSYS.
Review the design compatibility with existing installed security system and meet latest international standards and review all compliance statement to ensure the system comply with the requirements of the contract.
Assist on raising technical enquiries and requests for information (RFl's) to client for any technical variation/ partial compliance or any interface information required from client.
Systems: FOSS, RBS, GSR, MSR, ACS, ANPR, UVSS, CCTV, PSIM and MOI network
Hamad Port - QTCT2 project (Approved for Senior Engineer (ICT, ELV).
Design, installation, testing, commissioning of ICT/ELV System:
BMS, PAGA, FAS, Wireless LAN, LAN - Active, CCTV System Access Control, Fiber Optic Cabling, Structured Cabling
Engineering Document Review - Pre-Qualification Submittal, Shop drawings, MAS, MS, Cable pulling Schedule etc.
Field Activities -Site inspection: ICT, ELV, Security system installation, Splicing, testing of cables, General - Electrical, Pathways etc.
Work experience include Engineering, Vendor Coordination, Construction Support and System Integration, for the projects related to VTMIS and IDAS System.
Brief knowledge on Engineering standards, international standards, local standards i.e. Saudi Aramco Engineering Standards (SAES, SAEP, SATIP etc), and vendor-specific design guides and best practices.
Worked with vendor (Terma &Transas) to develop the Radar coverage report (29.2 nautical miles in JEC port using X band Radars with 60 meters tower).
CITC approval for VTMIS frequencies (RADAR, AIS, RDF, VHF etc)
HCIS Category 1 and 4 type fence system in JEC port.
Attended meeting with Client, Saudi Aramco and Government Company CITC Royal commission, Saudi defense to clear the technical queries for using X-band Radar.
Review FSD (Functional specification document), Contractual scope of work (including feed design) to meet the project requirement.
Thermal Camera Coverage report & installation (long range & short range).
System deliverables which include design control list (30%, 60%, 90% DD package), System design manuals, SAT, PAT, FAT & iFAT, Method of statements, installation procedure, JSA etc.
Worked with Saudi Aramco to review & close all VTMIS Design comments.
Installation & Commissioning of base station, Control center (main & redundant), and testing of VTMIS and sub-system.
Follow-up procurement of construction material and hardware delivery date.
Attend all technical meeting with Saudi Aramco, CITC, and government if required for clarification.
Prepare letters to the Client for notification and action items.
Working with Telecom consultant (LS Telecom) to review & finalize the RF study report.
Closely working with planning team on Weekly report, MoM, Monthly report, and forecast schedule, and program schedule.
Proactively scope the technical solution required to address customer requirements, assess customer's met and unmet needs, and recommend solutions that optimize value for both the customer and the firm.
Collaborate with Vendors to determine technical and business requirements and ensure that all necessary information is collated prior to formatting a solution
Interface with the leads of various disciplines (Communication, IT, Electrical, Civil, DATA, Structured cabling etc.) in order to assure the overall success of the project.
Collaborate with engineering, Construction and technical support resources to ensure proposed deals include technical solutions that accurately address customer needs
Communicate with the Project Engineers, Project Managers to provide technical and expert suggestions for projects in execution phase.
Coordination with QA/QC department to conduct the PIM, different inspection in project design and execution.
SUPPORTIVE ROLE:
Introduce IQ (Interface Query) for Interface team to easy follow up & record the documents on Interface points and interface agreement prior to use the Core- worx software.
Attended Core- worx training & observing the data flow (IP, AP, CR etc), and provide the solution in case of any interface issue.
Review all MR, NMR601, NMR602 (NMR 603 for VTMIS subsystem), Tower, Shelter etc
Raising Letters to Saudi Aramco in case of any change, delay in interface contractor information or any issue or sending notification to company.
Reviewed the multi-vendor/supplier proposal/quotation meet technical requirement, and advise procurement team on vendor selection.
Working with Procurement & planning team to maintain the Project Dashboard & schedule.
Professional Experience:
Client Name Saudi Aramco
Project Name Replace Wireless Systems - Various Company Facilities
Company name WIPRO Arabia Ltd- KSA
Position Sn Communication Engineer
Period Sep/ 2016- May 2017
Location Al- Khobar
Responsibilities:
Engineered and supervised the construction, installation and dismantling activity of Cathodic protection, SCADA and Paging wireless system
Managed and documented the dismantling activity paging equipment’s in 41 Saudi Aramco buildings and 2 Server stations.
Handled and follow up with sites engineer to execute the task in time frame.
Managed the Installation, termination and testing of Instrument cable from Rectifier to CP RTU system.
Prepared the installation procedure of CP and SCADA Server in Abqaiq and Juaimah communication DCO.
Managed and documented the dismantling activity of Cathodic protection/SCADA wireless Antenna (Omni and Yagi), radio and RTU.
Managed and documented the Antenna installation of Cathodic protection/SCADA wireless Antenna.
Prepared plan and executed the dismantling of 474 SCADA remote sites, and 18 master stations kingdom wide.
Prepare the CP/SCADA Antenna and feeder cable installation procedure (Omni & directional), and Imparted training of sites engineers on wireless Communication system
Coordination with OEM’s (original equipment manufacturers) Vendors and GES+ design office during the project design phase (60%, 90% and IFC) to develop the project detailed design package and system design manual (SDM), further to the responsibility for the development of all studies/analysis such as radio planning study, electrical calculation, heat dissipation analysis and structural load analysis for telecom towers with respective vendors.
Client Name Sadara Chemical Company
Project Division Leverage Asset (LA)
Company name WIPRO Arabia Ltd- KSA
Position Project Engineer- Communication
Period June/2013 - Sep 2016
Location Al- Jubail- KSA
Ensure project scope, schedule, closely coordinated, consistently monitored and controlled throughout the project cycle.
Set priorities for work execution and monitor them as an integral part of the overall project.
Coordinate technical interface data, exchanging between internal and external parties, provide oversight of the work status and assurance to contractor's interface management process.
Working with key contacts within the project team to ensure contractor interface issues are prioritized and addressed in time to achieve project objectives and milestones.
Work with all site teams to improve the flow of technical questions and timely, accurate responses
Interacts with all project disciplines to progress the flow of technical information required
Provide technical assistance and advice to solve any site related issue of SLHC and Build Unit.
Responsible for ensuring Contractor’s compliance with all interface related technical requirements.
Recommend improvements, ideas to work processes, policies, procedures, and design at every opportunity that will result in either schedule improvement or cost saving
Support Project team in the coordination of Team Building and Team Integration related activities. Facilitates new team member’s integration process
Facilitate team meetings and interactions promoting excellent communication with all team members and teamwork spirit.
Drive Interface Management Coordination Process and support resolution of critical conflicts.
Managed the readiness of the following systems:
Process CCTV System, Wireless access point, PAGA, Emergency & High Noise Areas Spill Beacons.
Fire & Gas System (FACP), Weather & Gas Monitoring System,
IP Phone, Hotline phone, FTEL, IPTV system, ISP /OSP readiness
Data network, ISS (Industrial Security System) Project
GSM/BRAVO IBS Installation in overall plant.
Building Management System
Manage and supervise the site engineers and the subcontractors responsible for the implementation of the project working in the rollout team; guide the acquisition team to pick up the place of the site.
To coordinate with the contractors and check the progress of the site as per schedule and to send daily progress report to the Project Manager Allocating the tasks and the responsibilities on the working teams.
Following works rate which carried out in sites and compare with the project scheduling, Reporting to the upper management regularly about the inclusive work, the barriers and the reasons of delays.
Managing the following systems:
Expertize NSN Transmission (Flexi Packet MW link as XPIC (2+0), HSB (2+0), (1+1) Space diversity etc.
Solving all issue related to Flexi Packet Bandwidth/Low throughput, QoS cross connection, License key, Software update for (FPR/FPMR ODU/ IDU FPH 800)
Handling the visibility issue as per DCN plan of all NSN MW link of the west region.
Trouble shooting the MW link/ Degraded MW link issues.
Excellent knowledge on other MW link NSN Flexi Hybrid, Flexi hopper, NEC, SRAL and Metro.
Doing Ethernet configuration in flexi packet needed to connect with ALU and cisco routers and ensure end to end connectivity. Making cross-connection & E1 troubleshooting end to end.
Remote support to site team trouble shooting the issue using Netviewer/ NetAct/ Putty.
Managing the daily duties of site surveyor Engineers, AutoCAD Design teams & performing the TSSR Report job with TSSR team.
Follow up the teams to execute the task on time & maintain all documents.
Give training to teams to improve the quality of work or any update given by the Clint.
Designing the RF_SSD for GSM Antenna & RRH.
Review and approve alternative materials proposed by suppliers and customers.
Assist the Design Consultancy to produce nonstandard solutions as required.
Ensure the site designs are in line with customers’ requirement and standard of the operation.
Ensure that site designs are compliant with local Health and Safety requirements.
Responsibilities:-
Commissioning & integrating of Nokia BTS, NEC SDH and PDH, NSN MW links.
Work on Alcatel-lucent SDH MUX 1642, 1660, 1662 etc.
Monitor alarms and statistics coming from the network.
Project Process Quality responsibility of GSM sites and NSN Management to ensure that all necessary processes have been implemented within the project, are documented in an acceptable format and readily assessable to all project team members within the Project Library.
NSN uses audits and reviews to verify that stated policies, targets, plan, processes, procedures and all other elements of the quality system have been implemented and are operating effectively in achieving the expectations and needs of customer satisfaction.
Implemented effectively. Aim was to help the management to achieve the objectives agreed with the customer
Assure compliance with quality specifications and standards
Manage the implementation of quality planning, assurance and improvement activities within the project
Coordinating with various teams for the smooth functioning and for fault free network.
Education:- CCNP Routing & Switching. Trouble shooting & maintaining IP network (642-832). 87.6% CCNP Switching Implementing Cisco IP Switched Networks (642-813). 86.8% CCNP Route Implementing Cisco IP Routing (642-902). 91.8% CCNA R&S Cisco certified network associate (640-802). 98.60% Graduation Bachelor of Engineering in electronics and communication engineering from M. D. University, India. (2008) Final year 83.33% Aggr. 77.00% Diploma Diploma in electronics & communication from M.S Ramaiah Bangalore, India. (2005) 68.05% 10th Matric (Class 10th) from G.I.C Inter collage, Fatehpur. 63.04%