Autocad Coordinator
Germanischer Lloyd
Total years of experience :26 years, 5 Months
- Coordinates, check dwgs. & supervise other Data processor/draftsman.
- Input mechanical design datas & inspection datas for piping, equipments for Carigali-Hess project using Galiom software.
- Draws & label piping isometric for Risk Base Inspection.
- Supervise, coordinates other Cad Draftsman.
- Draws & details fabrication dwgs. for replacement /repair of onshore/offshore structures/ storage tanks/vessels & piping.
- Site Visit to verify correctness both As built & autocad drawings.
- Check Inspection data input & outputs in line with software routines.
- Implementation of revision & updates to CIRRAS system.
- Preparation & compilation of summary reports.
- Attend GLB/BSP HSE (Health, Safety & Environment ) monthly meetings.
- Be involved at the appropriate level w/ the communication of safety awareness in the project.
- Supervise, coordinates other Cad Draftsman.
- Prepares plan & details of fabrication/shop drawings as per client standard & specifications in offshore/onshore
structures, pressure vessels, columns, storage tanks & heat exchangers.
- Site Visit to verify correctness both As built & autocad drawings.
- Label inspection data into drawings.
- Check Inspection data input & outputs in line with software routines.
- Implementation of revision & updates to CIRRAS system.
- Preparation & compilation of summary reports.
- Attend SDS/BSP HSE (Health, Safety & Environment ) monthly meetings.
- Be involved at the appropriate level w/ the communication of safety awareness in the project.
- Prepares erection drawings / layout for site.
- Prepares details of structures as per client’s standards & specifications.
- Prepares material take-off & bill of materials.
- Prepares electrical layout such as lighting & socket layout, telephone layout, clock layout, junction box diagrams &
S.D.F. connection diagram under the supervision of Electrical Engineers / Designers.
- Review & revise drawings as per client’s comments.
- Prepares as built drawings.
- Coordinates, check & supervise other cad operators/draftsman.
- Prepares plan & details of fabrication/shop drawings as per client standard & specifications in offshore/onshore
structures, pressure vessels, columns, storage tanks & heat exchangers.
- Prepares material take-off & bill of materials.
- Review & revise drawings as per client’s comments.
- Designates welding symbols, weld numbers & inspection categories as per client’s standard & specifications.
- Prepares as-built drawings for Client’s approval & final documentation.
Major Projects Handled:
1. SHELL OFFSHORE, Inc. - RAM POWELL, Houston Texas
TLP HULL VK Block 956 Platform “A” (Ram / Powell) Viosca Knoll 956 Field
2. PROJECT : 80359 - RAS ABU FONTAS “B”
Fabrication of Qatar Desalination & Power Plant
3. SALINE WATER CONVERSION CORPORATION (SWCC)
Fabrication of Medina Yanbu Desalination & Power Plant
MSF Desalination Plant - Phase 2 - Lot 2
4. SAUDI ARABIAN OIL COMPANY (ARAMCO)
Safaniya Gosp - 4 (Gas & Oil Separation Platform - 4)
Fabrication of 26 Offshore Modules & Platforms
5. PETROMIN SHELL REFINERY CO. (PSRC)
Fabrication of Third Crude Tank ( Item T-8103)
6. SAUDI ARABIAN OIL COMPANY (ARAMCO)
Increase Yanbu Crude Oil Terminal (YCOT)
Fabrication of 14 Offshore Jackets / Platforms
7. SAUDI ARABIAN OIL COMPANY (ARAMCO)
Surge Crude Oil Storage Tank (Item K-18D-057-62)
8. BELLELI YANBU EXTENSION
Fabrication of 3 Bay Factory Workshop & Maintenance Shop
9. IBN HAYYAN PLASTIC COMPANY
Fabrication of Pressure Vessels, Columns & Structures
10. SAUDI ARABIAN OIL COMPANY (ARAMCO)
Fabrication of Air Coolers & Structures
11. SAUDI PETROCHEMICAL COMPANY (SADAF)
Fabrication of Pipe Rack Ethane Spare Furnaces
12. QATAR GENERAL PETROLEUM CORPORATION (QGPC)
North Field Development Project
Topsides Facilities Phase I
Fabrication of 13 Offshore Modules & Platforms
Bechtel - Technip Joint Ventures
- Draws working plans, sections, elevations, perspective & location plan.
- Estimates labor & bill of materials.
- Supervise workers in construction site.
- Draws working plans & details of simple structures based on sketches or modified standard plans.
- Compiles surveying datas, plots cross section & profiles from survey notes.
- Reproduce maps in actual, reduced or enlarge scale.
- Responsible for the printing of all drawings.
- Compute bill of materials & estimates of simple structures for the proposed projects.
- Supervise other workers who are responsible for tracing, printing & filing plans.
- Under general supervision drafts maps, working plans & details of simple structures & portion of complex structures,
plots engineering statistics & does related works.
- Draws complete route of two line 85 km. Water injection flanklines from the scraper traps to the wells & ponds.
- Draws isometrics under the supervision of Piping Engineer / Designer.
- Compute & compiles surveying data, plots cross-section & profiles from survey notes.
- Plot bar schedule of work & S-curve of work being accomplished.
- Revise drawings as per Aramco change of order.
- File Welding notes & drawings.
- Completed all as-built drawings.
- Compute & draws for the bidding of the proposed project of oil pipeline in Saudi-Iraq Project last May to June 1984.
- Draws working plans on highways & drainage.
- Plots cross sections & profiles from survey notes.
- Drafts maps, reduced or enlarged scale.
- Prepares bridge lists, road diagrams & road maps showing distances, systems & their improvements.