Civil Engineer
AYTB
مجموع سنوات الخبرة :9 years, 1 أشهر
Review and analyze IFC drawing, design specifications and standards.
Technical query for any technical issues in the IFC drawing, design specification and standards.
Material take-off for all the materials needed as per approved IFC Drawing.
Making method statement prior for execution especially civil discipline.
Provide technical advice regarding design, construction, or program modifications and structural repairs to industrial and managerial personnel
Carry out site visit for ongoing activities in the project site
Coordinate to site engineer regarding technical issues to execute the work as per the project work specification
Coordinate to the quality personnel to avoid the non - conformities of the works in the project site.
Making as-built or redline drawing for any changes and modification in the site as per IFC Drawing.
Ensure the quality of the work per item with accordance to the standard and specification of the project site
Review of technical drawing and rectification of drawing coordinating with project design team for solving the Study of Approved drawings and specifications
Coordinate the technical personnel to ensure that the drawings is updated as per work execution in the project site
Review the documents before conducting for inspection at the project site
Prepare request for inspection (RFI), checklist and attached all the documents needed prior to inspection by Project Quality Inspection Division(PQID)
Conduct internal inspection on the item requested prior for final inspection of the Project Quality Inspection Division (PQID)
Conduct Material inspection at laydown yard prior for delivery to site
Ensure that the all testing in the project site have certificates and calibration from the third party
Identify and report the Non-Conformities of the construction
Coordinate and monitor all the inspection and testing activities, especially civil discipline
Monitor site activities to manage preparation of RFI transmittals for every hold points/witness points for required test and inspection
Checking FBE reinforcing steel, embedded items and formworks prior for concrete pouring works
Inspect project site to monitor progress and ensure conformance to design specifications and quality standards
Issued Non-Conformance Report (NCR) for the re occurring problem in the project site for not following the specification and quality standard
Monitoring the work execution and implement the quality standard of the work per item
Speed- up documents preparation, creation to records, and information retrieval while maintaining the accuracy and traceability of each documents stage
Resolve conflicts between departments regarding control of the quality and assure the proper flow of information through eliminating unnecessary activity, changing present forms, and adding new forms and work flow necessary for the activities
Ensure that all other discipline that required within the activity have been inspected and approved prior for final acceptance
Full responsibility of the finished project documents and archive them separately in office store in a highly professional way, as it can be easily recovered in the future
Ensure the quality of the work per item with accordance to the standard and specification of the project site
Review of technical drawing and rectification of drawing coordinating with project design team for solving the Study of Approved drawings and specifications
Coordinate the technical personnel to ensure that the drawings is updated as per work execution in the project site
Review the documents before conducting for inspection at the project site
Prepare request for inspection (RFI), checklist and attached all the documents needed prior to inspection by Project Quality Inspection Division(PQID)
Conduct internal inspection on the item requested prior for final inspection of the Project Quality Inspection Division (PQID)
Conduct Material inspection at laydown yard prior for delivery to site
Ensure that the all testing in the project site have certificates and calibration from the third party
Identify and report the Non-Conformities of the construction
Coordinate and monitor all the inspection and testing activities, especially civil discipline
Monitor site activities to manage preparation of RFI transmittals for every hold points/witness points for required test and inspection
Checking FBE reinforcing steel, embedded items and formworks prior for concrete pouring works
Inspect project site to monitor progress and ensure conformance to design specifications and quality standards
Issued Non-Conformance Report (NCR) for the re occurring problem in the project site for not following the specification and quality standard
Monitoring the work execution and implement the quality standard of the work per item
Speed- up documents preparation, creation to records, and information retrieval while maintaining the accuracy and traceability of each documents stage
Resolve conflicts between departments regarding control of the quality and assure the proper flow of information through eliminating unnecessary activity, changing present forms, and adding new forms and work flow necessary for the activities
Ensure that all other discipline that required within the activity have been inspected and approved prior for final acceptance
Full responsibility of the finished project documents and archive them separately in office store in a highly professional way, as it can be easily recovered in the future
Ensure the quality of the work per item with accordance to the standard and specification of the project site
Review of technical drawing and rectification of drawing coordinating with project design team for solving the Study of Approved drawings and specifications
Coordinate the technical personnel to ensure that the drawings is updated as per work execution in the project site
Review the documents before conducting for inspection at the project site
Prepare request for inspection (RFI), checklist and attached all the documents needed prior to inspection by Project Quality Inspection Division(PQID)
Conduct internal inspection on the item requested prior for final inspection of the Project Quality Inspection Division (PQID)
Conduct Material inspection at laydown yard prior for delivery to site
Ensure that the all testing in the project site have certificates and calibration from the third party
Identify and report the Non-Conformities of the construction
Coordinate and monitor all the inspection and testing activities, especially civil discipline
Monitor site activities to manage preparation of RFI transmittals for every hold points/witness points for required test and inspection
Checking FBE reinforcing steel, embedded items and formworks prior for concrete pouring works
Inspect project site to monitor progress and ensure conformance to design specifications and quality standards
Issued Non-Conformance Report (NCR) for the re occurring problem in the project site for not following the specification and quality standard
Monitoring the work execution and implement the quality standard of the work per item
Speed- up documents preparation, creation to records, and information retrieval while maintaining the accuracy and traceability of each documents stage
Resolve conflicts between departments regarding control of the quality and assure the proper flow of information through eliminating unnecessary activity, changing present forms, and adding new forms and work flow necessary for the activities
Ensure that all other discipline that required within the activity have been inspected and approved prior for final acceptance
Full responsibility of the finished project documents and archive them separately in office store in a highly professional way, as it can be easily recovered in the future
• Review drawing and specification in applicable to the project.
• Conduct material inspection of permanent materials.
• Conduct surveillance of constructions between and issue of NCR - Not Complying with the requirement.
• Monitoring of quality activities as required in SATIP / SAIC and ensures the effective implementation of client’s specification and applicable codes/standard.
• Notified client / Endorsed RFI to client for the appropriate inspections/test conducted.
• Collated and compiled all quality records for handing over to the client.
• Carry out quality activities / inspection in accordance to all relative project specification, current revision of drawings and approved deviation request.
• Ensure that all RFI’s were signed off.
• Resolved technical issues based on Project specifications and approved drawings.
• Coordinate and monitor all the inspection and testing activities, especially civil discipline.
• Identify and report the non-conformities of the contractor.
• Conduct site pre-inspection prior to raising of RFI’s.
• Inspect project sites to monitor progress and ensure conformance to design specifications, quality and safety standards.
• Conduct daily Toolbox Meeting for the execution of the work for the site project.
• Responsible for developing designs.
• Make sure about the quality of design documentation throughout design process.
• Act as a mediator between the contractor and the builder.
• Responsible for acting as site and project supervisor in construction and site work.
• Prepared documents for construction projects.
• Provide technical advice regarding design, construction, or program modifications and structural repairs to industrial and managerial personnel.
• Inspect project sites to monitor progress and ensure conformance to design specifications, quality and safety standards.
• Supervising for the leveling and surveying at site.
• Monitoring of the work execution and updating the schedule.
• Review of drawing and rectification of drawing, coordinating with project design team for solving the study of approved drawings and specifications problem in site.
• Coordinating with the subcontractor supervisor’s and foremen’s to execute the work as per the project work specification.
Review and analyze IFC drawing, design specification and standards prior to execute the works in the project site
Monitor the progress and ensure conformance to design specifications, safety and standards of the project site
Direct or participate in surveying to lay out installations and establish reference points, grades, and elevations to guide construction
Coordinate the technical personnel to ensure that the drawings is updated as per work execution in the project site
Coordinate and monitor all the inspection and testing activities, especially civil discipline
Inspect project site to monitor progress and ensure conformance to design specifications and quality standards
Estimate quantities and cost of materials, equipment, or labor to determine project feasibility
Carry out test soils and materials to determine the adequacy and strength of foundations, concrete, asphalt, or steel
Provide technical advice regarding design, construction, or program modifications and structural repairs to industrial and managerial personnel
Carry out site inspections for ongoing activities in the project site
Prepare and submit thorough daily progress reports
Execute for the bench marking, leveling and surveying at site
Monitoring of the work execution and updating the schedule
Coordinating with the supervisor’s and foremen’s to execute the work as per the project work specification
Coordinate to the quality personnel to avoid the non - conformities of the works in the project site.
• Conduct daily Toolbox Meeting for the execution of the work for the site project.
• Responsible for developing designs.
• Make sure about the quality of design documentation throughout design process.
• Act as a mediator between the contractor and the builder.
• Responsible for acting as site and project supervisor in construction and site work.
• Prepared documents for construction projects.
• Provide technical advice regarding design, construction, or program modifications and structural repairs to industrial and managerial personnel.
• Inspect project sites to monitor progress and ensure conformance to design specifications, quality and safety standards.
• Supervising for the leveling and surveying at site.
• Monitoring of the work execution and updating the schedule.
• Review of drawing and rectification of drawing, coordinating with project design team for solving the study of approved drawings and specifications problem in site.
• Coordinating with the subcontractor supervisor’s and foremen’s to execute the work as per the project work specification.
.
Review and analyze IFC drawing, design specification and standards prior to execute the works in the project site
Monitor the progress and ensure conformance to design specifications, safety and standards of the project site
Direct or participate in surveying to lay out installations and establish reference points, grades, and elevations to guide construction
Coordinate the technical personnel to ensure that the drawings is updated as per work execution in the project site
Coordinate and monitor all the inspection and testing activities, especially civil discipline
Inspect project site to monitor progress and ensure conformance to design specifications and quality standards
Estimate quantities and cost of materials, equipment, or labor to determine project feasibility
Carry out test soils and materials to determine the adequacy and strength of foundations, concrete, asphalt, or steel
Provide technical advice regarding design, construction, or program modifications and structural repairs to industrial and managerial personnel
Carry out site inspections for ongoing activities in the project site
Prepare and submit thorough daily progress reports
Execute for the bench marking, leveling and surveying at site
Monitoring of the work execution and updating the schedule
Coordinating with the supervisor’s and foremen’s to execute the work as per the project work specification
Coordinate to the quality personnel to avoid the non - conformities of the works in the project site.
• Review drawing and specification in applicable to the project.
• Conduct material inspection of permanent materials.
• Conduct surveillance of constructions between and issue of NCR - Not Complying with the requirement.
• Monitoring of quality activities as required in specification of the project and ensures the effective implementation of client’s specification and applicable codes/standard.
• Notified client / Endorsed RFI to client for the appropriate inspections/test conducted.
• Collated and compiled all quality records for handing over to the client.
• Carry out quality activities / inspection in accordance to all relative project specification, current revision of drawings and approved deviation request.
• Ensure that all RFI’s were signed off.
• Resolved technical issues based on Project specifications and approved drawings.
• Coordinate and monitor all the inspection and testing activities, especially civil discipline.
• Identify and report the non-conformities of the contractor.
• Conduct site pre-inspection prior to raising of RFI’s.
• Coordinating with the subcontractor supervisor’s and foremen’s to execute the work as per the project work specification.
• Make sure about the quality of design documentation throughout design process.
• Prepared documents for construction projects.
• Provide technical advice regarding design, construction, or program modifications and structural repairs to industrial and managerial personnel.
• Inspect project sites to monitor progress and ensure conformance to design specifications and quality standards
• Monitoring of the work execution and updating the schedule.
none