Essam El-Bagouri

Activities and Responsibility
• Responsible of distributing jobs between 3 detailing teams each consist of 3 detailers and 1 checker
• Monitoring projects schedule and work progress by preparing weekly and monthly progress reports.
• Studying the projects specifications and design drawings prior starting the design and detailing.
• Coordination with the design departmentto to avoid any future conflicts that might affect project schedule.
• Coordination with project team for the clients and shop requirements.
• Attending teleconference technical meetings to arrange project data for better handling during approvals and shop drawings preparations.
• Reviewing and raising RFI for technical inquiries.
• Establishing procedures and methods by which staff must abide when performing tasks
• Responsible of evaluating the team each Quarter based on productivity, attitude, ethics, quality and attendance on business need.

Activities and Responsibility
• Responsible of distributing jobs subordinate detailers.
• Follow up project schedules and progress to make sure projects schedules meets with planned dates.
• Studying the projects specifications and design drawings prior starting the design and detailing.
• Coordination with the design department to design applicable and simple connections as possible.
• Coordination with the project department for the project data, schedules and priorities.
• Coordination with Shop team to clear any conflict in fabrication drawings or any other requirements.
• Reviewing and raising RFI for technical inquiries.
• Check and review of general notes drawings (issued to shop).
• Check and review detailed structural steel shop drawings for fabrication.
• Check and review Erection drawings for site team.
• Check and review all the required reports (material list, bolt list, assembly list and etc…)
• Establishing procedures and methods by which staff must abide when performing tasks.

Activities and Responsibility
• Responsible of group of Material engineers following up their activities and involved in all projects handled by each one of them.
• Prepares material take-off as required in the client drawing and ensures that an accurate material description, length, total quantity, specifications, structure number, total weight are entered into the material-take-off.
• Prepares print out of purchase requisition for the approval of the Material Control Manager, Project Manager then forwards it to the Procurement and constantly follows up to ensure that requested materials are purchased within the deadline.
• Prepares material allocation based in the cutting list provided for by the Planning department and ensures accurate allocation as required in the construction drawing, then forwards it to the Encoder.
• Interfaces with Projects, Procurement, and Store to ensure availability of allocated materials as per raw material requisition (RMR) and maintain records of material requirement and issuance per job request.
• Prepares weekly reports showing Material status on each project and delays if any with the estimated date of material arrival updated by following up with procurement and project departments.
• Prepares monthly reports for each project showing progress on each project in addition in every information related to Material (wastage, percentage of received material compared to total ordered, reasons of delay if any, no. of purchase requisitions, …..etc.)

Activities and Responsibility
• Responsible of distributing jobs between 4 detailing teams each consist of 3 detailers and 1 checker
• Monitoring projects schedule and work progress by preparing weekly and monthly progress reports.
• Studying the projects specifications and design drawings prior starting the design and detailing.
• Coordination with the design departmentto design applicable and simple connections as possible.
• Coordination with Dubai project team for the clients and shop requirements.
• Attending teleconference technical meetings to arrange project data for better handling during approvals and shop drawings preparations.
• Reviewing and raising RFI for technical inquiries.
• Check and review of general notes drawings (issued to shop).
• Check and review detailed structural steel shop drawings for fabrication.
• Check and review all the required reports (material list, bolt list, assembly list and etc…)
• Establishing procedures and methods by which staff must abide when performing tasks
• Responsible of evaluating the team each Quarter based on productivity, attitude, ethics, quality and attendance on business need.

Activities and Responsibility
• Responsible of a team consist of 3 detailers.
• Studying the projects specifications and design drawings prior starting the design and detailing.
• Coordination with the design department to design applicable and simple connections as possible.
• Coordination with the project department in Dubai for the project data and priorities.
• Reviewing and raising RFI for technical inquiries.
• Check and review of general notes drawings (issued to shop).
• Check and review detailed structural steel shop drawings for fabrication.
• Check and review all the required reports (material list, bolt list, assembly list and etc…)
• Establishing procedures and methods by which staff must abide when performing tasks.
Projects handled through this period
• Six flags park (Dubai).
• Al-Nasr stadium. (Dubai).
• Jebel Ali hotel (Dubai).
• Kuwait international airport (Kuwait)
• Mohamed Bin Rashed Library. (Dubai).
• Riyadh Metro (Saudi Arabia)

• Working in the King Abdulaziz international airport development Project (KAIA), Jeddah, KSA
• Participate in implementing technical office policies and procedures.
• Study the project contract documents (time schedule, project design drawings, BOQ, etc.).
• Update the shop drawing log before sending the shop drawing to consultant for approvals.
• Study and prepare requests for information (RFIs) for all missing, unclear, conflicting or other technical matters that may arise during construction.
• Review sub-contractors’ shop drawings as well as outsourced shop drawings and coordinate their approval process with the project consultant.
• Coordinate with Surveying Engineer to provide him all the information about land coordinates and any site measurement required.
• Participate in solving/reporting any unexpected technical difficulties, and other problems that may arise during construction to the Technical Office Manager for discussion and proper solve.
• Prepare as-built drawings at the end of the project and hand over to the project consultant.

Activities and Responsibility
• Working in the King Abdul-Aziz international Airport Development Project (KAIA), Jeddah, KSA.
• Participate in implementing technical office policies and procedures
• Study the project contract documents (time schedule, project design drawings, BOQ, etc.).
• Update the shop drawing log before sending the shop drawing to consultant for approvals.
• Study and prepare requests for information (RFIs) for all missing, unclear, conflicting or other technical matters that may arise during construction.
• Review sub-contractors shop drawings as well as outsourced shop drawings and coordinate their approval process with the project consultant.
• Coordinate with Surveying Engineer to provide all the information about land coordinates and any site measurement required.
• Participate in solving/reporting any unexpected technical difficulties, and other problems that may arise during construction to the Technical Office Manager for discussion and proper solve.
• Attending any on-site testing that may be required (NDT, MT, UT, DFT, Pull out test for anchors, ….) and prepare report for the results.
• Prepare as-built drawings at the end of the project and hand over to the project consultant.

Activities and Responsibility
• Responsible of a team consist of 3 detailers.
• Studying the projects specifications and design drawings prior starting the design and detailing.
• Preparing purchase orders and cutting reportsfor project Material.
• Coordination with the design departmentto design applicable and simple
connections as possible.
• Reviewing and raising RFI fortechnical inquiries.
• Check and reviewof general notes drawings (issued to shop).
• Checkand review detailed structural steel shop drawingsforfabrication.
• Check and review all the required reports (material list, bolt list, assembly list and etc…)
• Establishing procedures and methods by which staff must abide when performing tasks.
Projects handled through this period
• Participation with the office team in detailing and checking of Steel, Handrail and Grating for South Helwan power plant. (9000Tons)
• Steel Structurefor EL-Masa Project in New administrative capital.
• Sidi kerir New Amine unit Project, ThyssenKrupp Industrial Solutions (EGYPT)
• Almaza City Center Mall.

Activities and Responsibility
• Responsible of a team consist of 3 detailers.
• Studying the projects specifications and design drawings prior starting the design and detailing.
• Preparing purchase orders and cutting reportsfor project Material.
• Coordination with the design departmentto design applicable and simple
connections as possible.
• Reviewing and raising RFI fortechnical inquiries.
• Check and reviewof general notes drawings (issued to shop).
• Checkand review detailed structural steel shop drawingsforfabrication.
• Check and review all the required reports (material list, bolt list, assembly list and etc…)
• Establishing procedures and methods by which staff must abide when performing tasks.
Projects handled through this period
• Participation with the office team in detailing and checking of Steel, Handrail and Grating for South Helwan power plant. (9000Tons)
• Steel Structurefor EL-Masa Project in New administrative capital.
• Sidi kerir New Amine unit Project, ThyssenKrupp Industrial Solutions (EGYPT)
• Almaza City Center Mall.

A group leader tottaly responsible of 3 detailer engineers helping them and developing there skills and checking there output drawings through Tekla structures software and studying clients standards and drawings and contact several departments and clients to solve problems in order to finish work with the highest possible quality.

Activities and Responsibility
• Responsible of a team consist of 3 detailers.
• Studying the projects specifications and design drawings prior starting the design and detailing.
• Coordination with the design departmentto design applicable and simple
connections as possible.
• Reviewing and raising RFI fortechnical inquiries.
• Check and reviewof general notes drawings (issued to shop).
• Checkand review detailed structural steel shop drawingsforfabrication.
• Check and review all the required reports (material list, bolt list, assembly list and etc…)
• Establishing procedures and methods by which staff must abide when performing tasks.

A group leader for a team of 3 detailer engineers and responsible of studying clients standards and drawings and checking my team output drawings created by Tekla structure software and developing there skills and also contacting several departments and client to solve all our problems in order to get the higher quality of work.

Activities and Responsibility
• Detailing of Steel, Miscellaneous and Grating for Bechtel (Ras Az Zawr Aluminium Smelter
Project) KSA (2730 Tons)
• Detailing of Steel, Miscellaneous and Grating for CTCI Arabia Co. Ltd (Ibn-Rushd Project) KSA (303 Tons)
• Detailing of Steel, Miscellaneous and Grating forJGC KSA (10 Tons) Vinci in the Cairo metro project as Foundation Engineer

Joined as detailing engineer and started to learn TEKLA structures software for steel and detailed many jobs by creating shop drawings with the requirments needed from clients.