فرشاد ek

• Co-ordination with Client and Consultants in QC activities of Project.
• Verification and review of Project QA/QC Procedure, ITP, MAR and MES
• Visual, close and detailed inspection on installation of cable tray, cables, fiber optic cables, Panels, Axial fan, Transformers, Shunt Reactors, Rectifier, Inverter, Batteries and dampers.
• Attend Testing and commission for Fan, DP, Control Panels, ECP, LSCP, Dampers, Tunnels Sensor, and AHU etc.
• Performing inspection with Thales for Telecommunication, Signalling and SCADA integration with Energy & TVS system.
• Witnessed the HIPOT, IR test, Continuity Tests and OTDR etc.
• Performing final acceptance inspection with Qatar Rail & PMCS.
• Preparation and closing of Punch list items.
• Ensured that all materials are inspected for conformance to required criteria prior to dispatching to site. Raised non-conformance reports against non-conforming items.
• Assist Lead QA auditor during quality assurance audits conducted by subcontractor and other subsystem.
• Ensured that all calibrated equipment used within calibration validity dates.
• Vigilance on Project Construction with safety work environment in accordance with Qatar Rail Standards.
• Monitored the installation and pre-commissioning process of the contractor by carrying regular inspections.
• Responsibly worked at all times to the required procedures and processes to meet the company target of RFT (Right First Time).
• Assisted the other departments to ensure smooth working of the project and work in emergencies as well.
• Maintain records of all inspections and submit them to the proper authority for professional oversight and documentation.
• Actively participated and promoted quality improvements to ensure zero quality defects.
• Follow up with second inspection appointments and certifications for noncompliant properties to ensure necessary repairs are conducted in a timely manner.
• Conduct the Surveillance inspection during the installation and erecting works.
• Follow up with second inspection appointments and certifications for noncompliant properties to ensure necessary repairs are conducted in a timely manner.

Kier Infrastructure taken Contract from SABIC Engineering and Construction Company.

The project involves the Construction of 12.5 km Storm drainage, 7km sanitary waste water collection system, 26 km Potable & Fire water network, 46 km irrigation & distribution system, Landscape 150, 000 sqm asphalt Road, 65000 sqm colored interlocking Paver tiles, 51 no unit substations, Street lighting networks LV cable, Medium voltage, Telecommunication, Instrumentation works

Responsibilities:
• Preparation of method statements, inspection and test plan.
• Inspection of the material, preparation of material receiving inspection report.
• Preparing IFC quantity of each electrical item (BOQ).
• Preparing co-ordination drawing and shop drawing for Sabic approval.
• Preparing MV shop drawing for Saudi Electric company approval.
• Inspection of all the site activities like electrical cable laying, installation of instruments, installation of earthling system, installation of street lighting pole, installation of sub-station.
• Inspection of fiber optic cable for voice and data and IPTV.

1) Project : Haramain High Speed Railway Project
Client : Saudi Railway Organization(SRO)
Responsibilities:
• Co-ordination with Client and Consultants in QC activities of HHR Project.
• Preparing RFI & Transmittal.
• Preparing Method of Statement and ITP.
• Preparing IFC quantity of each electrical item (BOQ).
• Prepare As built Drawings & shop drawings using AutoCAD.
• In charge in Checking of installation for Fire alarm control panel(FACP) and Low voltage system .
• In charge in Checking of installation for smoke detector, heat detector, manual fire alarm station , fire alarm bell, Lighting and Power system, grounding cable installation, cable tray installation and distribution board installation, if it conforms to the Installation Standards and if it is in accordance in the Plan (IFC drawing).

2) Project: King Abdul Aziz International Airport APM Project.
Client : BOMBARDIER
Responsibilities:
• Co-ordination with Client and Consultants in QC activities of APM Project.
• Preparing RFI, HPR &TQ.
• Preparing IFC quantity of each electrical item (BOQ).
• Prepare Materials Submittal and compliance with SASO Standards.
• Prepare As built Drawings & shop drawings using AutoCAD.
• In charge in Checking of installation for Low voltage system cable, Smoke detector, duct detector, heat detector, Manual fire alarm and Fire Alarm Bell, if it conforms to the Installation Standards and if it is in accordance in the Plan (IFC drawing).
• Cable design and selection.

1) Project : ASTRO MALL SAWFA
Client : EMIRATES SPACE EST
Responsibilities:
• Preparing IFC quantity of each electrical item.
• Prepare As built Drawings & shop drawings using AutoCAD.
• In charge in Checking of installation for Fire detection system, smoke detector, heat detector and Public Address system, if it conforms to the Installation Standards (e.g. NEC, etc.) and if it is in accordance in the Plan (IFC drawing).
• In charge in checking and controlling Plans (shop drawing) for construction implementation.
• Conduct Testing and Commissioning of Electrical system.


2) Project: SCRAPER RECIVER AND BLACK POWDER FILTRATION (KRZTG 2); Ras Al Zwar (KSA)
Client: Aramco
Responsibilities:
• Prepare Materials Submittal and compliance with ARAMCO Standards.
• In charge in Checking delivered materials for Lighting and Power system, Fire detection system & Public Address system, if it conforms to the required material specifications of approved material submittals and Manufacturing Standards (e.g. UL, NEMA, SASO etc.).
• In charge in checking and controlling Plans (shop drawing) for construction implementation.
• Conduct Testing and Commissioning of Electrical system.
• Prepare documents and confirmatory test report during inspection time.

Electrical QC Engineer - Real Estate Development & Investment Company (REDICO); Al-Khobar (KSA)

1) Project: NEW AIR DEFENSE BUILDING
Client : ROYAL COMMISSION (RC)
Responsibilities:
• Contractor Quality Control Program, this includes site inspection for compliance with contract Documents, approved submittals
• Implement the proper quality plan, QC procedure & Inspection test plan.
• Ensure all the equipment inspection activities are performed to approve procedures, codes and standards.
• Prepare Materials Submittal for Low voltage system with R.C. Standards.
• In charge in Checking of installation for Lighting and Power system, Fire detection system, Telecommunication, Public Address system and IPTV Systems, if it conforms to the Installation Standards (e.g. NEC, etc.) and if it is in accordance in the Plan (IFC drawing).
• Design for Panel board load calculation.
• Prepare As built Drawings & shop drawings using AutoCAD.
• Installation of addressable Fire alarm control panel and public address system Panel.
• Installation of smoke detector, duct smoke detector, heat detector, fire alarm bell and manual address system.


2) Project: Royal Commission Project 815 C01 & C02
(Construction of 405 Unit Multi Store Building)

Responsibilities:
• Prepare Submittals (material and shop drawing) for client’s approval.
• In charge in Checking delivered materials for Lighting and Power system, Fire detection system, Telecommunication and IPTV Systems if it conforms to the required material specifications of approved material submittals and Manufacturing Standards (e.g. UL, NEMA, etc.).
• Witness the test inspection, authorizing the acceptance at quality control completion, obtain the relevant documentation and ensure the correct implementation of the approved Inspection
• In charge in checking and controlling Plans (shop drawing) for construction implementation.
• Conduct Testing and Commissioning of Electrical and Telecom facilities
• Prepare documents required during commissioning and for handing-over of project (Electrical and Telecom documents).

Electrical Engineer - KSEB (Kerala State Electricity Board); Kerala (India)

Project: Hydro electric power generating station

Responsibilities:
• Controlling and maintenance of governor unit
• Needle calibration
• Controlling compressor unit
• Installation MAX
• Controlling cooling motor
• Maintenance of VRVT
• Maintenance of MIV
• On Load Tap Changer(OLTC)