Electrical Technician
Amec Foster Wheeler
Total des années d'expérience :21 years, 5 Mois
Installation, Isolation, reinstatement and associated construction testing of electrical equipment in NON-HAZARDOUS and HAZARDOUS areas.
Inspection and completion of applicable certification / documentation as required including red-lining of drawings to reflect ‘as-built’ status.
Inspection of electrical installations / equipment and completion of associated certification of permitted work scope completed by NON-COMPEX Electricians within a hazardous area.
Read, understand and implement all applicable company / project policies, working practices and procedures, ensuring at all times that all works associated with the role of Electrical Technician is completed safely and to a high standard.
Complete all work scope in accordance with applicable work pack / job card instructions, associated procedures and drawings / sketches.
Provide support to other trades/disciplines where required, or form part of an integrated multi-discipline team.
Raising applicable Permit to Work (PTW) in order to complete work scope in a controlled and safe manner.
Undertake appropriate Risk Assessments (RA) in order to complete work scope in a safe and controlled manner.
• Switchgear Commissioning and operation, (functional testing through LOCAL and REMOTE operation by DCS-Distributed Control System; modification/rectification of internal wiring controls and terminations as per drawing and etc.)
• Transformer testing( Dry and Oil type)
• Conduct cable continuity checking(power /control)
• Insulation Resistance Testing (power cables; electric motors; transformers and other electrical equipments.
• Functional testing of motor feeder modules prior to energization of equipment and this includes rectification /modification and troubleshooting.(mechanical trouble; contactors and relays modifications and etc.)
• Troubleshooting the system incase of electrical trouble when commissioning the particular equipment.
• Assigned as operation and maintenance technician for electrical(warranty technician)
• SWITCH BOARD operator.
Company: Kentz Engineering and Construction
Kentz MPEC Malaysia
Inclusive Date: September 12, 2013-March 23, 2014
Position: Electrical Technician
(assigned as Punchlist Coordinator and a Work Permit Holder)
Job Site: EPC4 PNG LNG Project
Southern Highlands Province
Papua New Guinea
(as work permit holder)
• Visual inspection of work area prior to application of the permit to determine the actual status and its situation, to know what necessary documents to be attached in the application of the work permit.
• Preparation of documents as required in the permit for approval.
• Incharged in work activities when work permit has already been approved and thus liable for safety of the work group.
(as Punclist Coordinator)
• Received direct instruction from QA/QC (internal Punchlist) for particular work.
• Inspection of modified/rectified punchlist works prior to presentation and for final inspection to the client's representative.
• Review drawings of any Technical Querries (TQ's) and Site Instructions (SI's) given by the Engineering before commencing to work
Company: Kentz Engineering and Construction
Dominican Republic, SA
Inclusive Date: November 06, 2011 to December 16, 2012
Position: Electrical Commissioning Technician
(supply to FLUOR DANIEL, Canada as Pre-Operation/Commissioning Technician.)
Job Site: PVDC-Pueblo Viejo Development Corporation (BARRICK GOLD MINE)
Cotui, Dominican Republic, SA
• Loop/line checking; Insulation Resistance testing;
* Power and Control cables
* Electric Motors
• Verification and checking of motor control circuits; terminations at MCC's prior to energization and motor run testing with and without load. This includes modification and rectification in case of wrong and lacking control terminations, interlocks based upon the drawing.
• Motor data inputs to electronic motor control device (GE multilin) if the system is runned automatically through DCS.
• Check and verify if the system is in trouble electrically during testing and commissioning
• Assist vendor in commissioning the particular system and equipment.
• Conduct reading of the following during motor run-in testing: * Voltage (prior to run and during run)
* Current load in AMPS
* Motor temperature
* Vibration of the motor
* Motor speed
Company: Samchang Electromechanical Company
Dubai, U.A.E.
Inclusive Date: November 19, 2009-March 16, 2011
Position: QA/QC personnel (prev. F/M Equipment Department)
Job Site: DEWA-Dubai Electric and Water Authority
Jebel Ali Power and Desalination Plant ("M" Station)
Jebel Ali, Dubai, U.A.E.
• Erection of the following: * LV and MV Switchgears
* 11 KV Transformers (Dry type and Oil type)
* Bus Ducts
* Battery Charger Panels
* Batteries (including banking and termination)
• Conduct IR (Insulation Resistance) Test and line Checking.
• involve in conducting High Potential Voltage Testing (HI-POT)
• Clearing Punchlist Items as per comments after inspection.
• Conduct inspection as per RFI (Request for Inspection) with Gen. Con.'s QA/QC personnel and Consultants.
Work Description:
• Installation of electrical system (temporary supply) from generator set down to main panel board supplying the entire project such as: power machines, tower cranes, respective distribution boards, and etc.
• Coordinate and carry out orders from our site engineer and supervisor regarding the plans to be executed in the layout in slab if ever there are some revisions, additional and changes arising for which the electrical consultant wants to be done.
• Impose standard procedures in installing and fixing devices, switches, power outlets, lighting fixtures including block outs for pipes sleeves for power cable and bus ducts entrances.
• Also in-charge in Rough-In Works.
Company: Surigao Cable Television, Inc.
Surigao City, Philippines
Inclusive Date: August 2001- June 2006
Position: Lineman/ Technician
Job Site: Surigao City Wide
• Cable layout and termination of fibre optic line, primary and secondary line.
• House installation and TV fine tuning.
• Cable amplifier installation, inside and outside plant.
• Install cable equipments such as: satellite receivers, modulators, transmitter's decoders and other cables equipments (inside plant)
• Maintenance of switching equipments (inside plant)
• Troubleshoot the system in case of operation failure and service disruption.
Company: Manila Mining Corporation
Placer, Surigao del Norte, Philippines
Inclusive Date: May 1998-June 2001
Position: Industrial Electrician
Job Site: Placer Surigao del Norte project
• Monitoring on all motor controls and circuits.
• Installation of motor controls and its remotes.
• Troubleshooting and maintenance of all electrical motors.
• Reading power consumed by the company every hour.
• Power line installation and electric post dressing both primary and secondary structure.
• Transformer erection and banking.
• Building wiring installation and maintenance in the sub-station.
3-year Diploma of Technology(preparatory to Engineering)
College March 1998 3yrs. Diploma of Technology Surigao Norte School of Arts and Trades Graduate, Major: ELECTRICAL Surigao City
March 1991 Secondary Surigao del Norte Nat'l High School Surigao City Elementary
March 1987 Elementary Gusa Elementary School Gusa, Cagayan de Oro City