Hafiz Muhammad Awais Nasim

1-NOC Transmission Engineer (Nokia) Telenor Project Nokia June 2022 to Present
Job Responsibilities
§ Real-time monitoring of optical fiber and microwave.
§ Ticket creation of different network issues.
§ Escalation of Fiber breaks IP AGG, OTN, OSN, DWDM.
§ Resolving network capacity requirements for long distance and OTN Rings and Mesh Network
§ Strong technical knowledge of DWDM-based optical transmission systems.
§ Follow-up of network-related issues § Initiating network change-related activities.
§ Network outage handling in different scenarios
§ Escalation of Node temperature and power issues.
§ Nationwide reporting of persisting alarms.
§ Identify and escalating hardware malfunctioning issues.
§ Degradation troubleshooting on different node
§ Identifying complex outage scenarios
§ Basic Troubleshooting of MW IDU’s in case of outage scenarios
Nokia Certification:
Safety Capability and Enablement in Customer Projects
Step-1 Opportunity, Customer, and Industry Requirements.
Step-2 Profile Health, Safety, and security risks, estimate health, safety, and security cost.

 Huawei Pakistan
Designation: BSS Team Lead For North Region (JAN 2017 TO DEC 2018)
Job Responsibilities: MS Project (Mobilink & Warid)
 Managing a team which works in 24X7 environment fully equipped with BSS KPI monitoring skills and tools.
Analyzing the KPIs of the network including CSSR, DCR, TCH Blocking etc.
Daily/weekly planning on BSS issues troubleshooting & rectification of Telco alarms.
 Supervision and onsite support of BSS issues on BTS/NodeB troubleshooting & rectification and PM/CM team.
 Troubleshooting Telco alarms causing service degradation.
 Supervision on TTs Closure on OWS & Mateline.
 Telco Spare Parts apply through (ISDP & icare) software.
 Necessary onsite support for (CCMS) critical customer complains.

 Seder Group, APD (KSA)
SEDER Group Telecommunication (APD) in STC Managing services project 5th Jan 2017 - 1st April 2017
HUAWEI (EHS):
Maintain and familiar the safety measures at site of HUAWEI ENVIROMENTAL HEALTH &
SAFETY rules and Regulations (EHS)
Designation: LTE Engineer (OCT 2015 To DEC 2016)
LTE Engineer at Audit (STC & ZAIN) Project (MAY2016 To DEC2016)
South & West Region
Job Responsibilities: (OMS Power Department)
 Field visits for sites PMR CM & AUDITS as per given schedule.
 Preventive Maintenance proper start through MATELINE SOFTWARE.
 Managing the Team on different tasks of Telco as well as Non Telco Equipments Preventive Maintenance.
 Managing the record of work Orders and closing of trouble tickets.
 COW sites complete PMR (Telco as well as Non Telco Equipments) with CIVIL work just like cow Tower wires tights.
 Battery test done on different sites during BDT.
 ALL Alarms (Telco as well as Non Telco) troubleshooting done during CM activities.

 LTE Engineer at USF10 STC project (FEB2016 To APL2016) South Region

Job Responsibilities: (Implementation Department) HUAWEI EQUIPMENTS
 Troubleshooting of hard ware related issues of Different technology equipment like 2G, 3G, and 4G (LTE).
 Troubleshooting of Hardware and software issues related to BTS 3900L, BTS 3900, BTS 3012 and BTS 3812.
 Perform complete health check of all technology sites.
 Perform VSWR, DTF and RTWP test.
 Perform troubleshooting to improve RSL during fine tune activates.
 Preform troubleshooting of RTN 905, 950, 950 A, 980 series.
 Supervise and interacted with teams which included technicians, riggers and engineers during field work.
 Performs PAT & PREPAT activities and rectification of Snags (Telco & Non Telco Equipment’s).

 Implementation Engineer at Zain reload project (OCT2015-TO-JAN 2016)
North & East Region
Job Responsibilities: (Implementation Department) HUAWEI EQUIPMENTS
 Installation of new 4G carrier aggregation sites in Zain project.
 Swap the single mode and dual mode antennas with Huawei tri band R11 (Built in RCU’s) Antennas.
 Installation of new BTS and BBU 3900.
 Installation of RRU on antenna’s and assembling as per site requirement.
 Installation of RCU and TMA on anteena’s.

 Perform troubleshooting to improve RSL during fine tune activates.
 Troubleshoot RET, TMA alarms during RCU, TMA installation
 Installation of UBBP (Universal Base Band Processing Unit) and UPEU (Universal Power Enviromental Unit),
Installation of GPS.
 Installation of DCDU (Direct current Distribution Unit)
 Supervise installation of Fiber cable, Power cable, Feeder cable.
Supervise after installation all equipments to the Quality work like proper routing of Fiber cable and Power cable through clamp, proper routing of Feeder cable through Feeder clamp, Anteena jumper, RRU jumper, TMA jumper proper water proofing etc.

 HUAWEI
Designation: NOC Engineer(5th Nov 2014 To 24th Jan 2015)
Mobilink Project Power Commitment Team
Key Responsibilities:
 Working on Huawei project with Mobilink concerning Northern regions (N1, N2, N3)
 Monitoring of Power cube and Genset alarms and Linked sites Outages on M2000, Neteco, $Opex Software.
 I also have an experience of HOTO Mobilink sites Remote.
 Monitoring of Power cube site used in Neteco Terminal different activity like different alarms escalate, site configuration related to Power cube site.
 Daily Fuel Theft report analysis and problematic sites data correction,
daily DG Running Alarms collect M2000 & Neteco and report.
 Field Engineer: Field work FLM (Power & BSS ) Engineer (Mobilink Project)
Huawei Technology (1st Mar 2014 To 1st Nov 2014) (8- MONTHS)
Key Responsibilities:
 Field visits for sites audits as per given schedule, provide on-site training to Sub-con teams.
 Collaborate with Managed services sub-con on critical issues solution/rectification.
 Having good experience on telecom sites Power issues, ATS Panels, Distribution Panels, Gensets (Perkins 800 KVA, 100 • KVA, 27KVA, 30KVA, HP 20KVA, and John Deer 31KVA), maintenance.
 Inspection/ maintenance of Cooling system.( Stulz & Split A/Cs )
 Inspection/maintenance of batteries including greasing, tightening of cables, voltage measurements and installation of batteries.
 Checking, maintenance & rectification of earthing resistance at site as per standard.
 Different power, Genset, air-condition issues solved on the site.

 MCU Calibration /cleaning & Replacement of Rectifier systems/Modules installed at the site along with the monitoring of • DC load.
 Troubleshooting of all electrical equipment like ATS panel, lighting system etc.
 BSS Engineer at Mobilink project:
 Supervise and interacted with teams which included technicians and engineers during field work and also look after the BSS issue for the region.
 Different issues solved for BTS.
 Troubleshooting & maintenance of Huawei BTS 3900, 3900A.
 Coordination with on call team for resolution of ongoing issues.
 Troubleshooting of BSS hardware issues resulting in KPI degradation.
 Check and Troubleshoot VSWR.
 Check and Troubleshoot RSL level.
 Check and Troubleshoot Dish Alignment.
 Data Analyst (NOC Engineer):
 Working on Huawei project with Mobilink concerning Northern regions (N1, N2, N3)
 Monitoring of BTS alarms and Linked sites Outages on M2000, U2000
 Escalation of critical Alarms to relevant supplier and taking feedback of those alarms to avoid outages.
 Escalation of critical/prolonged outages to Management.
 Generation and closure of TT’s of outages/critical Alarms (Low Voltage).
 TCH availability of BTS and calculation of TCH for the whole regions.
 BTS and BSC Loop Testing.