Senior Electrical Design Engineer
Parsons
Total years of experience :34 years, 2 Months
Jan 2016 to Present / PARSONS - Dubai, UAE
Senior Electrical and MEP Engineer
• ER Community Villanova
The project was design of street lighting, landscape lighting, SL feeder pillars, substations, traffic signals and MEP design for pump stations.
Client: Dubai Properties Group.
• Nad Al Sheba Development Project
The project was design of street lighting, SL feeder pillars, substations, traffic signals and MEP design for storm water pump station.
Client: Meraas Shamal Development.
• MAG EYE-MEYDAN Project
The project was design of Solar street lighting, Landscape lighting, LS feeder pillars and substations.
Client: MAG Property Development
• ITS2020 Intelligent Traffic System Project
The project was design of electrical power supply for ITS system and follow up with DEWA to get load NOC for all ITS system components as dynamic message sign gantry, CCTV camera, Bluetooth assembly, wireless antenna, ...etc.
Client: RTA.
• Jebel Ali Labour City Project
The project was design of street lighting, SL feeder pillars, substations and traffic signals.
Client: Meraas.
• Al Zahia Project
The project was design of street lighting, on bridge street lighting, under bridge lighting, SL feeder pillars, substations and pump station.
Client: MAF Majid Al Futtaim.
• R1013 2C/2D/2E1/2E2/2B1/2B2 Improvement of AL Shandagha Project
The project was design of street lighting, on bridge street lighting, under bridge lighting, Arch lighting, SL feeder pillars, and substations.
Client: RTA.
• R881 3C/2 AL YALAYIS STREET Project
The project was design of street lighting, on bridge street lighting, under bridge lighting, Tunnel lighting, SL feeder pillars (10 Nos.), 6 substations and 9 traffic signals.
Client: RTA.
• DCH Dubai Creek Harbour Development Project
Design of infrastructure dry services and MEP works, such as high voltage and low voltage distribution networks, street lighting, landscape lighting, ETC and ITS networks, and many pump stations.
Client: Emaar
• R777/4B1Entrances of the Jewel of Creek Development Project
The project was design of street lighting, on bridge street lighting, under bridge lighting, Tunnel lighting, pump stations, SL feeder pillars (3Nos.), 3 substations and 2 pump stations.
Client: RTA.
• R1020 Al Arouba Street Improvements Project
The project was design of street lighting, on bridge street lighting, under bridge lighting, Tunnel lighting, SL feeder pillars (200Nos.), many substations, and many traffic signals.
Client: SRTA & SEWA.
• Jebel Ali Hills Project
The project was design of street lighting, on bridge street lighting, under bridge lighting, Tunnel lighting, SL feeder pillars, many substations and many drainage, sewerage and fire fighting pump stations.
Client: Meraas.
Contractor: Ghantoot.
• DAF Dhayat Al Fursan Project
Design of infrastructure dry services works, such as high voltage and low voltage distribution networks, street lighting, landscape lighting, ETC and ITS networks, and many pump stations.
Client: Ministry of Housing, Kingdom of Saudi Arabia
Working mainly in The following projects:
• Mudon Project
The project includes more than 400 villas in phase one, electrical works includes street lighting, SL feeder pillars, sewerage pump stations, Fire and Irrigation pump stations, LV distribution network more than 116 MDBs and 14 Nos. of substations.
Client: Dubai Properties Group.
Contractor: Wade Adams.
• Jebel Ali Port Terminal-3
The project was electrical design for primary power supply which includes the utility connections (at 11KV), switching station and distribution substations and site power distribution. The maximum demand load 60MVA, the main switching station distribute 11KV rings for many substations that provide main power for cranes, stack cranes, refer S/Ss, cold ironing, buildings, street lighting and other utilities load.
Client: Dubai Port World
Contractor: TOA- Soletanche Bachy- JV
Consultant: AECOM
Engineer: Royal Haskoning
Principal Consultant: AE7
MEP contractor: Drake & scull international
The duties include:
1- MV & LV cable route layouts.
2- MV & LV single line diagram.
3- MV & LV load summary sheets.
4- MV & LV cable sizes and voltage drop calculations.
5- MV & LV room equipments layout.
6- MV & LV short circuit calculations.
7- Power factor correction calculation.
8- Street lighting design.
9- Pump station design.
10- Lighting and small power design for building.
11- CCTV and access gates design.
12- Studies and analysis load flow, short circuit, voltage drop, cable sizing and harmonic analysis using ETAP software.
• Dubai Industrial City
The project includes street lighting, SL feeder pillars (40 Nos.) and 14 Nos. of pocket substations.
Client: Dubai Properties Group.
Contractor: AL RAJHI Construction.
Electrical Contractor: Al Canary.
• Dubai Studio City
The project includes street lighting, SL feeder pillars (10 Nos.), Irrigation pump station and 5 Nos. of substations.
Client: Dubai Properties Group.
Contractor: ASCON.
Electrical Contractor: ECON.
• JAFZA Gate-4
The project includes street lighting, on bridge street lighting, under bridge lighting, SL feeder pillars (5 Nos.), and 5 Nos. of substations.
Client: Dubai Port World.
Contractor: KHANSAHEB.
Electrical Contractor: Shell Bird.
• Improvements to Al Khail Road Phase-6 (Al Yalayis Road)
The project includes design of dry services as diversion of 132 KV, 11 KV design, street lighting, ETS, ITS, spare ducts and standard details.
Client: Road & Transport Authority (RTA).
The design works includes the following:
1- Preliminary design.
2- Preliminary Study.
3- Contract Drawings.
4- For Construction.
5- Final Design.
6- Tender Design.
• The Villas and 558&260 Villa
The project includes street lighting, SL feeder pillars (20 Nos.), Fire and Irrigation pump stations, LV distribution network and 14 Nos. of substations.
Client: Dubai Properties Group.
Contractor: ASCON/Wade Adams.
Electrical Contractor: ECON.
• Mirdiff Project(Shorooq)
The project includes Irrigation pump stations and substations.
Client: Dubai Properties Group.
Contractor: Wade Adams.
Electrical Contractor: Honest Hands
Worked in the following projects:
• Dubai Festival City
The project comprises of main roads, tunnels, bridges and utility networks serving 15 zones with their internal networks,
Project total estimated value $ 3.5 Billion.
Client: Dubai Festival City
Contractor: 1- Al Futtaim Carillion. 2- Dutco Balfour Beatty.
MEP Contractor: 1- Al Futtaim Engineering 2- DANWAY 3- BK Gulf LLC
The duties as follow:
1- Load calculation analysis of the project and calculate that 5 nos. 132 KV S/Ss serving the project.
2- Follow the design of 11KV distribution networks and coordinate with DEWA to install 132 KV S/Ss and several 11 KV S/Ss and PK S/Ss.
3- Design, modify, and supervise LV distribution networks including all type of distribution boards, main and street lighting feeder pillars.
4- Design and inspect street lighting, landscape lighting, signage lighting, ITS, ETC, irrigation control system and estimate T.C.L., voltage drop calculation.
5- Commenting all design stages in coordinate with client, shop drawing approval, supervision, and commissioning all electromechanical works in sewerage P.S.s, water treatment P.S.s, DM storm water P.S., potable water P.S., Vacuum P.S., and GAS farm P.S., and guide the sub consultant and contractor to comply with authorities requirements.
6- Take action for all site activities and contractor issues as shop drawings, material specifications, standards, commissioning, inspection, testing, and at final stage handing over, as built drawing, and O/M manual acceptance.
7- Attending periodically meetings, to coordinate, cooperate, and instruct the contractor to execute activities as per contract specifications and in compliance with concerned authorities requirements and further safety precautions.
• King Abdullah financial district
Client: Rayadah Investment Company.
Sub Consultant: SNC LAVALIN.
MEP Contractor: KETTANEH.
The project was District Cooling Plant for King Abdullah financial district, the duties to review and approve all drawings, materials and calculation for all electrical systems in the project, which include the following systems:
1- Lighting. 2- Emergency Lighting. 3- Power. 4- Lightning. 5- Grounding. 6- Fire Alarm. 7- FM-200. 8- Telephone & Data. 9- CCTV, Intercom & Access Control. 10- Building Management System.
• Interchange-8 SHZ Road Project
Client: Roads & Transport Authority RTA
Contractor: SHIMIZU CORPORATION.
MEP Contractor: CENTAUR
Worked as Electromechanical Engineer (approved by RTA) in interchange IJ8 at Sheikh Zayed Road, the interchange includes more than 20 bridges. The duties as follow:
1- Design 11KV distribution network and follow with DEWA the installation of many 11KV/400V S/Ss, PMTs, and upgrade others.
2- Design, and supervision the diversion of services corridors such as 132KV, 11KV, 6.6KV, Pilot, F.O., and OHL in coordinate with concerned authorities
3- Design, modify, and supervise LV distribution networks including main feeder pillars, street lighting feeder pillars, and distribution boards comply with DEWA and RTA requirements, coordinate with RTA maintenance department to relocate more than 20 feeder pillars from center medium of SHZ road to the side and to recalculate the cable sizes as per voltage drop calculation.
4- Design and supervise the street lighting and high mast poles, on bridge lighting, under bridge lighting, on bridge advertising panels, and coordinate with RTA departments to execute the works.
5- Review and approve shop drawings, factory drawings, material specifications, reply to contractor queries, letters, and RFIs as well as follow all site activities.
The company includes many refineries and factories, and I working as a projects engineer, chief of control system development team, and team leader in maintenance, projects and development departments, the duties include:
1- Installing, connecting, startup, calibration, and maintenance of all type of control systems such as Pneumatic, Electrical, Electronic, digital and intelligent.
2- Installing, connecting, startup, and maintenance of all type of control system equipments such as Transmitters, Sensors, Switches, Controllers and Valves.
3- Installing, modifying, and configuring hardware and software of PLC, working mainly on Smar, Modicon and Siemens PLC familiars with others PLC systems.
4- Working as development team leader and projects engineer in the following projects:
• Change pneumatic control system to fieldbus system includes PLCs and SCADA.
• Installing and connecting “Siemens” PLC and “Bently Nevada” vibration monitor to a generator 4MW in Daura Refinery.
• Installing control room with PLCs, Fieldbus, HMI and PCs in power house.
• Upgrade PLC type Modicon 184 to model 984.
• Installing, startup and calibrating ICP Spectrometer analyzer controll by PC with software from HORIBA Company.
• Installing and startup plastic containers and plugs making and filling plant with more than 30 machines which are controlled by PLC and mini PLC type Siemens.
• Installing and startup Saab Tank Radar system with PC network.
• Installing and startup multi points 140 I/P monitoring system type “AOIP” with PC.
• Supervising and startup ‘Sludge profiler for oil tank’ system with PC, the system uses SONAR to detect the sludge level then breaks the sludge.
5- Responsible for all electrical, control, and instrument in the offers analysis committee, investigate and analyst the following plants:
• 2 boilers 80 ton/h with power house.
• 2 refineries with product capacity 40 ton/h.
• 4 air compressors “Atlas Copco”.
• Water treatment unit.
Al-Tahrer Construction Company, Baghdad, Iraq.
Working as senior electrical engineer in many projects, the works includes:
1- Installing 11KV/380V PMTs, control cabinets, cabling, earthing, and street lighting for more than 30 Km of roads / Al-Semawa.
2- Execute all electrical works pertinent to the extension of Al-Tib hospital city / Baghdad.
3- Installing HV, LV, and ELV, telephone, fire alarm networks for many residential buildings G+3+Roof and B+G+4+Roof / Baghdad.
4- Execute electrical services such as power supply transformers, LV network, Distribution boards, control cabinets, telephone, intercom, fire alarm, cooling water system …etc for many factories.
Al-Rafdeen Construction company, Baghdad, Iraq.
Working in Al-Idaum Weir project as electrical engineer the duties as follow:
1- Installing and connection of 11KV distribution substation with two 1 MW standby generators, and installing overhead lines and more than 20 nos. 11KV/380V PMTs to supply the project.
2- Installing all electrical services in the project such as, LV distribution networks, street lighting and telephone network.
3- Execute all electrical works for more than 60-caravans, 100-villas, 4-labor camps, 4-restraints, 4-halls and 2-workshops.
4- Assembly, connecting, and startup huge tunnel excavator and responsible of the operation and maintenance of the excavator.
5- Installing and managing of workshop for electrical equipments maintenance and estimate all materials procurements and maintenance budget.
6- Installing, startup and maintenance automatic cement plant.