QC Engineer Electrical
GS E&C
مجموع سنوات الخبرة :14 years, 5 أشهر
o Witness for factory acceptance test.
o Preparation of Quality control procedure
o Preparation of Inspection and Test Plan, & Quality Control forms for field inspections.
o Review ITP prepared by subcontractors prior to client verification and approval.
o Review and approval of materials in accordance with project specifications.
o Responsible for the implementation of quality control and assurance procedures in accordance with project specification.
o Coordinate with client project management team and quality control team to implement and maintain project quality standards at work site.
o Verify required inspection reports and test records are systematically generated and complied to the approved QC procedure.
o Inspection of materials as per the project specification and approved documents.
o Conducting site inspection as per ITP and quality control procedure.
o Inspection, Testing and commissioning for Substation, Transformers, 11kV Switchyard, UPS up to 30KVA, MV & LV switchgears.
o Inspection of Cathodi Protection System for Above ground /Underground pipe lines.
o Inspection of Cathodic Protection System for Tanks.
o Assistance for commissioning and pre commissioning activities.
o Sizing calculation of 11KV Transformer, RMU and Power cables.
o Electrical circuit designing and load calculation.
o Designing of LT panel SMSB and small power DB’s.
o Erection of 11KV Transformer RMU and Diesel Generator.
o Erection of PACKAGED SUBSTATION.
o Erection of Electrical panels and switchgears.
o Installation of 30KVA UPS and battery bank.
o Preparation of SAT procedure as per project specifications.
o Coordinate with vendor and complete Site Acceptance Test (SAT) as per project requirements and approved procedures for different types of electrical equipments.
o Preparation of Inspection and Test Plan(ITP) and as built drawings.
o Preparation of drum schedule and sag chart as per drawings.
o To be responsible for internally and externally all project related matters.
o Work execution and project management as per condition.
o Coordinate with construction / Field engineering and closing Client NCRs.
o Issuing NCRs to Subcontractors as per project requirements and specifications.
o Coordinate with construction / Field engineering and closing Client punch lists.
o Preparation of final hand over documents / Dossier as per contract requirements.
o Witness for factory acceptance test.
o Preparation of Quality control procedure
o Preparation of Inspection and Test Plan, & Quality Control forms for field inspections.
o Review ITP prepared by subcontractors prior to client verification and approval.
o Review and approval of materials in accordance with project specifications.
o Responsible for the implementation of quality control and assurance procedures in accordance with project specification.
o Coordinate with client project management team and quality control team to implement and maintain project quality standards at work site.
o Verify required inspection reports and test records are systematically generated and complied to the approved QC procedure.
o Inspection of materials as per the project specification and approved documents.
o Conducting site inspection as per ITP and quality control procedure.
o Inspection, Testing and commissioning for Substation, Transformers, 11kV Switchyard, UPS up to 30KVA, MV & LV switchgears.
o Inspection of Cathodi Protection System for Above ground /Underground pipe lines.
o Inspection of Cathodic Protection System for Tanks.
o Assistance for commissioning and pre commissioning activities.
o Sizing calculation of 11KV Transformer, RMU and Power cables.
o Electrical circuit designing and load calculation.
o Designing of LT panel SMSB and small power DB’s.
o Erection of 11KV Transformer RMU and Diesel Generator.
o Erection of PACKAGED SUBSTATION.
o Erection of Electrical panels and switchgears.
o Installation of 30KVA UPS and battery bank.
o Preparation of SAT procedure as per project specifications.
o Coordinate with vendor and complete Site Acceptance Test (SAT) as per project requirements and approved procedures for different types of electrical equipments.
o Preparation of Inspection and Test Plan(ITP) and as built drawings.
o Preparation of drum schedule and sag chart as per drawings.
o To be responsible for internally and externally all project related matters.
o Work execution and project management as per condition.
o Coordinate with construction / Field engineering and closing Client NCRs.
o Issuing NCRs to Subcontractors as per project requirements and specifications.
o Coordinate with construction / Field engineering and closing Client punch lists.
o Preparation of final hand over documents / Dossier as per contract requirements.
• Sizing calculation of 11KV Transformer, RMU and Power cables.
• Electrical circuit designing and load calculation.
• Designing of LT panel SMSB and small power DB’s.
• Erection of 11KV Transformer RMU and Diesel Generator.
• Assistance for commissioning and pre commissioning activities
• Preparation of test pack and as built drawings.
• Preparation of drum schedule and sag chart as per drawings
• To be responsible for internally and externally all project related matters
• Work execution and project management as per condition
• Planning the daily activities and preparing the weekly and monthly progress reports.
• Project Execution.
• Ordering Materials.
• Inspection, Testing and Commissioning for 11kV Switchyard, MV & LV switchgears.
• PROTECTION AND TESTING
Differential protection
REF Protection
Distance Protection
Backup Protection
Bus bar Protection
• RELAY TESTING
O/C-E/F Relay (50, 51, 67 RNB)
Differential Relay (87, 87 G, 87 GT)
REF Relay (64, 64 S)
Under Impedance Relay (21)
Under Voltage Relay (27/59)
Reverse/Low/Over Power Relay (32 RLO)
Loss of Field (40)
NPS Thermal (64 T)
Under/Over Frequency (81 U/O)
Over Fluxing (24)
Stator Earth Fault Relay
• POWER EQUIPMENTS TESTING
Tan Delta test
High voltage test
Contact resistance test
Ratio test
Magnetizing test
Core balancing test
Short circuit test
REF and Differential stability
OCC test (CT)
Polarity test (CT)
Transformers up to 100 MVA.
SF6 Gas circuit breakers up to 220 KV.
Current transformer and Potential transformer.
Oil filtration plant-6000 LPH.
Isolators up to 220 KV.
• Testing of Differential relays, Distance relays, Over current relays, Earth fault relays and restricted earth fault relays Etc.
• Routine testing of relays like trip testing, instantaneous trip testing, pick up and drop off testing.
• Commissioning of auto re-closing of breaker in 220kv transmission line and bus bar protection of 110kv bus.
• Tan delta testing of power equipments (power transformers, CT and PT etc).
• High voltage testing of power equipments.
• Contact resistance testing and tripping time testing of circuit breakers.
• Moisture content testing and gas content(DGC) testing of transformer oil
• Capacitance testing and Ratio testing of transformers.
• Maintenance of power transformers (100MVA, 60MVA, 40MVA, 12.5MVA and 10MVA).
• Maintenance of ABCB, SF6 Breaker, VCB, MOCB & isolators.
• Transformer oil filtration works and BDV testing.
• Installation of switch gear and different types of electrical apparatus. Overhauling and filtering of transformers.
• Qualities checking of new transformers like megger testing.
• Ratio testing, short circuit testing and open circuit testing.
• Control testing and control wiring.
Second Class