Sr. QA/QC Engineer Electrical
saipem
Total years of experience :13 years, 4 Months
QA/QC Abilities will be responsible for participating in the planning and scheduling of QA/QC requirements in projects and programs, developing and implementing the quality system documentation, GASCO Standard (DGS) Electrical General Specification and Installation to commissioning Procedures. Inspection and testing all electrical equipment in accordance to assist in updating Operations Function codes, as per (DGS) GASCO Standard.
• Preparation and Submittal for RFI.
• Review and Inspection of all Electrical Material, prior to Installation.
• Daily monitoring the Construction Activities.
• Responsible for the over-all implementation of Quality Control related electrical works accordance with project specifications and Engineering Standards.
• Verify the equipment and devices used in the project meets the required specifications per project requirements, Standard and tested in accordance with the procedures.
• Monitor the Underground installations; check the required burial depth and spacing requirements to adjacent installations, prior to backfilling
• Testing of cable meggaring and HI - POT test.
• Inspection of Electrical Equipment function test and Illumination level testing of lighting system.
• Inspection of electrical installation Panels Monitoring control panel wiring, Termination, cable routing & cable tray installation.
• Verify all required inspection report and test records are systematically generated and compiled according to the approved QC Procedures.
• Coordinate with Client representatives regarding the implementation and quality of works.
• Inspection of Switch Gear Panel installation, Cable Termination and Bus bar torque.
• Installation of control panel marshalling panels and termination continuity and Meggar test.
• Insulation Resistance and Winding Resistance Testing of LV, MV motors.
• Inspection of Ground Rod and Grounding cable, as per Engineering Specification.
• Preparation of Electrical Inspection Reports
• QA/QC Inspection witness for cathodes protection system Underground pipe lines and Metal Tanks. Installation of Permanent Anodes, Temporary Mg Anodes, LIDA Anode, Galvanic Anodes, Test station, AJB, NJB, MJB ASB and Positive Negative cable laying, and Termination, Installation and termination of Transformer rectifier, Witness of HMWPE Cable Holiday Test and CP system Pre-Commissioning Activities.
• Inspection of Heat Tracing panel Installation, PT, RTD Junction Box Installation and Heat tracing cable laying and meggaring.
• Witness for Pre-commissioning of motor Solo Run activities.
• Prepare the Motor Solo Run test Package.
• Witness of Motor Solo Run Test
• Provide sufficient feed back to QA/QC Manager on the day to day quality issues.
• To supervise and carry out effective implementation of work schedule to clear punch list.
Erection /testing/pre-commissioning/commissioning assistance for Electrical substations, switch rack, transformers, auto re-closers, HV & LV panels and motors, generators, heat tracing systems, cathodes protection systems, asset security systems, HV, LV and control cables, etc.
• Responsible for daily activity progress reporting.
• Adherence to site safety rules & regulations
• Coordinating for all site activities, managing Foremen, Technicians etc. for the Successful Completion of works.
• Preparing ad-hoc jobs plan based on the job priority, material availability etc.
• Conducting daily / weekly internal job review meetings for Project / ad-hoc jobs.
• Attending weekly client meetings.
• Monitoring the progress of jobs, in order to make action plans, in case of delays.
• Coordination with Clint / vendors / Sub contractors / Inspection team
• Comply with client Specifications and Standards
• Installation, Inspection and testing of all types of cables
(unarmored and armored )
• Installation, inspection& testing of Cable tray (Ladder and punching type)
• Installation, inspection &testing High bay lightening
• Installation, inspection & testing of over head cranes(kones cranes)
• Installation, inspection & testing of MCC, PCC and SF6 circuit breakers( 132 to220 KVA)
• Inspection of first fix, second fix and third fix(industrial)
• Installation, inspection & testing of HT cable termination and glanding
(Cold compound joint kits, Hot compound joint kits, Heat shrinkable joint kits, hot compound termination and hot shrinkable termination kits)
• Site inspection of equipment and adherence of QA/QC procedures.
• Lead a qualified technical team and achieved scheduled completion
of the projects.
• Ensured completion of project activities on schedule by using advanced planning and progress, material tracking.
• Provided the required managerial and technical support / guidance to subordinate enabling them to achieve their work targets smoothly.
• Excellent organizational, interpersonal, communication, critical thinking and problem solving skills.
• Proven ability to work independently as well as part of a team
• Maintenance of H V LV motors, MCC panels, Transformers
• Gas circuit breakers (Operation and Maintenance of 33 KV and 132 KV GIS)
• Air circuit breakers (6.6 KV VCB and400 V ACB)
• Operation and maintenance of DG sets and related panels
• AC, DC, UPS and Battery Bank, MOV, AOV and MIC cables
• B D V Test of transformer oil
• Installation of conduit piping and cable trays
• Installation of cable laying and termination
• Installation of LT, PT, TT and loop checking, intergrity test
• Installation of F and G and telecommunication, public address
• Installation of panels M CCB, S MC B and M S B, M I C Cables
• Transformer irrection and L V side termination
• HSE induction of workers before assuming work at site.
• Tool Box Talks
• Participation in HSE meeting and taking action on the issues discussed.
• Identify Report, Record & Rectify unsafe acts / conditions.
• Taking corrective/preventive action in Accident investigation.
• Report and record Near misses, Incidents and take corrective action.
• Identify and control safety violation.
• Installation of conduit piping and cable trays
• Installation of cable laying and termination
• Installation of LT, PT, TT and loop checking, intergrity test
• Installation of F and G and telecommunication, public address
• Installation of panels M CCB, S MC B and M S B, M I C Cables
• Transformer irrection and L V side termination
• Installation of BMS and CCTV
• Installation of rigid steel conduit and electro metallic tubing
• Installation of cable trucking
• Installation of program logical control and termination
• Installation of Cad welding for earthing, Installation of underground piping
• Yearly preventive maintenance of transformers, switchgear and HT motors
• A C B, V CB, O C B, Batteries, Generator and U P S
• B D V test of transformer oil
• Operation for cable fault locator and cable route locator, Burn out test kit for cables
• Maintenance of Electrical works in Industrial and domestic areas
• Maintenance of high voltage and low voltage switchgears - 3.3kV, 11kV, 22KV.
• Maintenance of Transformers up to 3000 KVA
• Maintenance of Air circuit breakers, Vacuum circuit breakers and oil circuit breakers.
• Maintenance of lead acid and nickel cadmium batteries and its chargers.
• Maintenance of vacuum contactors for high voltage motor feeders.
• Maintenance of Emergency diesel generator sets with parallel operation
• Maintenance of motor operated valves (Rotork, Biffi and Limitorqe)
• Ability to work from schematic and logic diagrams and diagnose the trouble in automatic electrical and electronics circuits.