Jose Cabungason

• Residential / Industrial Contractor for Electrical, Plumbing, Small Bore Pipe for water line, HVAC
Split Type, Window type Cleaning and Trouble Shooting.
• Pressure Tank, pressure Instrument installation and control trouble shooting and maintenance.
• Supervision Construction Installation of all Electrical Instrument Mechanical system and equipment’s using approved engineering designed
• Supervision installation of control loops wiring system and equipment’s, plumbing conduit valve & fittings, fire & gas alarm system, smoke heat detection sprinkler system etc.
• Provide site leadership and supervision for the contractor to ensure that all construction activity is executed safely.

PRIGORODNOYE SHELL, Sakhalin Energy
Sakhalin, Russia
• Involved in Turnaround shutdown activity creating work pack different sub-system, work order, materials request, materials take-off, Material identification at site, materials inventory using SAP/ Smart Plant., test pack Nuovo Pignone GE Mark VI & Dresser Rand Compressor assisting in the installation of Instruments, materials such as Vibration /probe, Temperature Element, Pressure Switches, Flow element Transmitter, Pressure Transmitter, Switches and Valves including Heat Tracing System to equipment motors & small bore pipe lines. to ensure conformance with the hook-up drawings, specifications and quality standards. Including Bench shop calibration and field calibration setting of Gap voltage for vibration using TK3 Test instrument, fluke 789 process meter, Druck pressure calibrator, normalization of all I/O signals in HMI interface after reinstatement of all instruments. Attend weekly meeting to discussed shutdown activity, prepare materials onsite and coordinated with the process operation prior to raise permit approval before commence job and conduct Tool Box meeting discuss PPE, JSA, PTW and tools.
• Nuovo Pignone GE Mark VI Compressor PMR-Pre-Mixed Refrigerant, Mixed Refrigerant and Dresser Rand, P&ID Line check and identify Instrument and materials,
Compressor site inventory material list and record, materials ordering and warehouse availability checklist.

• Involved for the Construction, Mechanical Completion, P&ID Hook-Up line check, Commissioning and Start-Up of PTSC LAMSON FPSO located in Tuas Singapore Onshore / Offshore Vietnam THANG LONG DONG OIL FIELD Development.
• Responsible to fill up Pre-commissioning ITR Inspection Test Results, MC Mechanical Completion Inspection Test Result and Inspection and Calibration, loop testing of all Electrical/Instrument, Telecom-PAGA and HVAC Controls installation wiring termination as per test pack assigned layout drawing and detail termination, including energized. Final handover all daily accomplishments to the Lead engineer.
• Carry out Pre-Commissioning, Commissioning and Start-Up Factory Acceptance Test and Site Acceptance Test various types of Instrumentation and Controls, Fire & Gas detectors, Telecom PAGA-Public Address General Alarm system, HVAC Controls including 3 unit of Solar Power generation system and Kawasaki HP/LP compressor, Process Instruments Rosemount, Yokogawa, Bettis, Rotork, KTM, Fisher, Valtec, Masoneilan valves, controller and assist hydro testing.
• Conducted Construction, Tri-Party inspection, Punch list Clearing, Installation, Inspection, testing and commissioning & Start-Up operations with the present of client and operation personnel’s.
• Onshore/Offshore hook-up preparation, Commissioning Start-up Team for re-tuning of all instruments tripped alarm for all the motors involved in process, level alarm tripped and shutdown alarm tripped, including Heat Tracing system to equipment and small-bore pipe lines.
• Stand by Instrument personnel during Commissioning, Start-up offshore for warranty maintenance, troubleshooting, re-range parameter setting, replacement defective instrument.
• Permit Receiver, team member assist to operation start-up.
• Instrument Specialist Calibration assigned at PTSC LAMSON FPSO PROJECT.
• Turn around Shifting Maintenance assist to operation.
• Documentation preparation and bring for approval of operations and client.
• Attend schedule fire drill safety briefing and emergency evacuation drill.
• Attend daily safety toolbox talk all staff crew in the vessel during onshore/offshore.
• Attend department meeting discuss daily production planning and target.

• Involved for the Construction, Mechanical Completion, Supervision, Commissioning and Start-Up of TOKUYAMA POLYCRYSTALLINE SILICON MANUFACTURING PLANT Project TMP2 located in Bintulu, Sarawak Malaysia SDN, BHD,
• Manage and Handle Methanol system in entire plant Supervision/Inspection P&ID Line Checked, Hydro Testing and Remove / reinstatement of valve, flange, instrument, orifice plate gasket and bolt tightening after leak testing and Air Blowing and Nitrogen pressurizing and get witnessing with client with corresponding time. Including correct implementation of all utility equipment’s for FAT/SAT acceptance testing.
• Assigned in Atlas Copco compressor skid, fire water skid and Methanol system package entire plant to handle group of mechanical and fitter to conduct mechanical completion in all area of responsibilities.
• Atlas Copco Compressor Skid P&ID line checked, air leak testing, Air Blowing, Nitrogen purging & blanketing.
• Submit list of Mechanical, Electrical / Instrument, Fire water skid loop folders completed to the Lead Engineer.
• Carry out Mechanical completion of Atlas Copco compressor, Nitrogen purging, Air Blowing, leak testing, Bolt Tightening.
• P&ID Line Checked verification, Air Blowing, Nitrogen purging and leak testing including Heat Tracing system to equipment’s as per test point and boundary limits.
• Attend daily management meeting discuss daily accomplishment report.

Singapore Parallel Train Utility & Recovery Project
ExxonMobil Petrochemical Singapore

• Involved in Construction, Mechanical Completion, Supervision and preparation for Start-Up with operation staff and client representative located in Jurong Island Singapore.
• Coordinate and supervise work performed by the contractors Hydro Testing etc.
• MC-Mechanical Completion / Commissioning Inspection, Hook-Up installation of all instruments / Electrical and Telecom in all assigned area of responsibilities, such as Mitsubishi Gas Compressor, Atlas Copco Compressor, Heat exchanger, Boiler system, Valve manifold, vessel, contactor /fractionator and HVAC Control system.
• Creating of inspection reports, details drawing, hook-up drawing, as-built drawing, P&ID lay-out drawing.
• Assist to the vendor in energization of all Electrical & Instrument controls and equipment’s in all area of responsibilities. Including FAT/SAT of all utility equipment’s and apparatus.
• Conduct JSA and Tool Box talk prior to start of job with the group of technicians assigned.
• Execute all Electrical / Instruments assigned work according to schedule; plan within approved Commissioning Functional Test Procedures and practices, and as per Commissioning Lead Engineer instructions.

ESSO KTT Platform Marlin-B Project Australia, Pty. Ltd.
• Involved for the Construction, Mechanical Completion, Hook-Up, Commissioning, Start-Up of ESSO KTT Platform Marlin B Project Australia Pte.Ltd.
• Participate in daily Instrument Commissioning meeting and make list of instruments. Already done and completed, including those instruments with minor and major problem to discuss how to create remedy and rectify the problem which involved in hook-up installation.
• Mechanical Completion, pre-commissioning and commissioning of Gaitronics telecom system, HVAC Control system, Fire & Gas System, Process Control System loop check, energization and FAT/SAT acceptance testing.
• Assist Rolls Royce, solar turbine, caterpillar emergency diesel generator vendor for the mechanical completion and commissioning as duties assigned responsibilities.
Loop check, calibrate, energized all instruments involved in the system Skids area of responsibility and assisting Mechanical group during Hydro Testing, Air Blowing, Steam Blowing.

North Belut, Conocophillips/CPP Platform

• Involved for the Construction, Hook-Up and Commissioning of CPP Platform North Belut ConocoPhillips located in Batam Indonesia Onshore/Offshore Natuna Indonesia.
• Mechanical Completion, loop checking, commissioning, hook-up, start-up, punch list clearing & rectify. Sequence test, checking of interface wiring & I/O signal from field UCP, HMI to DCS interface, MC-ITR, PC-ITR, FAT/SAT acceptance testing documentation.
• Vendor package skid assignment loop check & powering up all Instruments Fire water system, Nitrogen, Deluge system, Fire& Gas, Telecom PAGA, HVAC system, Rolls Royce Gas compressor, Solar Turbine compressor.
• Permit Receiver, Tool Box Talk, JSA, Documentation.

SU TU Vang Cuulong Production Drilling Platform

• Involved for the Construction, Hook-Up, Commissioning and Start-Up of SU TU Vang Cuulong Production Drilling Platform located in Batam Indonesia Onshore/Vietnam Offshore THANG LONG DONG Oil FIELD Development.
Carry out full testing of all instrument /Telecom assigned in area of responsibility, including MCC interface wiring input, output signal for motor tripped and permissive start to run.
• Functional testing of all I/O signal configuration from field, DCS, PLC, HMI & HVAC system consist of flow switches, damper valve, pressure switches, Temperature switches, Humidity Transmitter Controls Including documentation MC ITR, PC ITR, FAT/SAT and As-Builting.
• Permit to work, JSA, Lock out Tag Out strictly implementation.

BP/AIOC ACG Full Development Project Onshore/Offshore Oil & Gas Central, East, West Azeri & Drilling Quarter Production platform.
Baku, Azerbaijan

• Involved for the Construction, Hook-Up, Commissioning and Start-Up BP/AIOC Central Azeri, West Azeri, East Azeri and Drilling Utility Production Platform located in Baku, Azerbaijan Onshore/Offshore Caspian Sea.
• Pre-commissioning, Commissioning, Start-Up activity group of Technicians, Engineers, Supervisor and all discipline involved.
• Carry out motor run test with load and no-load run test, and ensure (LUN) Livening Up Notice and PTW are issued as per commissioning test procedures, record all parameters such as voltage, current L1, L2, L3 during every 4 hours interval and written down to PC-ITR as accomplishment report using standard test equipment AC/DC clamp meter, Fluke multimeter, phase rotation meter, laser temperature detector.
• Verify all associated documents are already complete like MC-ITR, PC-ITR with no Category-A punch list,
(LUN) Livening up Notice, PTW, and JSA prior to conduct power energization.
• Responsible to conduct function test of the entire motor control module assign in my system area of responsibility to complete the MC-ITR’s Mechanical Completion Inspection including heat tracing system.
• Check and Testing all Electrical / Instrument /Telecom control wiring interface to MCC motor control center, including Heat Tracing system to equipment’s assist working with the vendor ABB & S&I Switchgear Instrumentation for FAT/SAT acceptance testing of LV-Low Voltage, Medium Voltage, HV-High Voltage Switchgear Instrumentation & controls and HVAC Controls
System Interface wiring to UPS-Uninterrupted Power Supply and others.
• Attend daily PTW meeting coordinate with the responsible person supervisor, site controller and permit issuer.

SSSP-Saudi Strategic Storage Program /Saudi Aramco

• Involved in the Oil & Gas Tunnel Installation / Construction, Mechanical Completion, Hook-Up, Commissioning Start-Up of Saudi Aramco SSSP Project.
• Conducted Testing, Pre-Commissioning, Commissioning Cause and Effect sequence test. All Electrical & Instrumentation and Controls.
• Calibration and functional test of all Fire & Gas and Process control loop assign in the system handle, such as Open Path Gas Detector, Point Gas Detector, Flame Detector, Heat Detector, Smoke Detector, H2S Detector, Manual Call, HVAC DAMPER Valve interface to Fire & Gas and Process Instrument & Valve interface to Fire & Gas.
• Testing & Commissioning all Fire & Gas /Telecom Control Panel loop check internal and field wiring using latest issued approved loop drawing for construction.
• FAT/SAT & Loop Check, calibrate. Troubleshoot all instrument assign in the system and creating MC-Mechanical Completion Inspection Test Report-Commissioning Inspection Test Report.
• Attend HSE and Tool Box Talk daily meeting prior to start working.

Turkmenneftegas Petro-Chemical Refinery
Balkan, Region Turkmenbashi, Turkmenistan

• Involved for the Construction, Mechanical Completion, Hook-Up, Commissioning and Start-Up of Turkmenneftigas Perto-Chemical Refinery located in Balkan Region Turkmenbashi, Turkmenistan.
• Calibration and commissioning of all instrument such as Honeywell TDC3000, fisher instruments, Bettis/Rotork, Masoneilan valves, Rosemount Instrument,
• Process utility Silo, Boiler System, Bagging Section implementation of FAT/SAT & loop check all instrument, equipment’s involve in Extruder Pelletizing machine.
• Cabling, Wiring Termination, I/O card, field junction box, Remote instrument Enclosure.
• Team leader cable pulling and cable termination CCR, field junction box and field instruments.
• Reporting job accomplishment, Documentation and As-Built.
• Permit Receiver, attend daily management meeting.
• Check and review all document involved field Instrument installation, Hook-Up, elevation, P&ID motors verify all Heat Tracing system check Isometric, Material take off.
• Conduct Tool Box Talk, JSA and discuss how to use proper tools while doing the job and correct PPE.

Sonatrach /BP Project

• Involved for the Construction, Mechanical Completion, Inspection, Supervision Commissioning and Start-Up of Sonatrach / BP Project Enhance Oil Recovery Project located in SAHARA Desert Rhourde El Baguel Algeria.
• Form Filling of loop package, Test package, Bench Test calibration results, detail drawing, hook -up drawing, As-Built drawing, P&ID, lay out drawing, Plot plan drawing and cause & Effect Drawing.
• Functional commissioning and start-Up, GE Mark V Turbo Generator. Nuovo Pig none gas turbine
Injection compressor, Tulsa Oil Heater Boiler, Foxboro I/A series marshalling panels.
• Powering up all instruments and re-configure setting alarm trip signal interface to process equipment and Telecom PAGA Alarm system, including system interface to shutdown such as Motor, PLC, Heat Tracing system to equipment’s motors and MOV & valves.
• FAT/SAT & Calibration loop check all instruments vendor skid, process and test separator.
• Supervision, Construction, Mechanical Completion, P&ID line check, Material take off, Hook-Up, cable tray, conduit, marshalling panels, Junction, cabling, wiring termination.
• Attend daily management meeting, submit daily progress report.
• PTW, JSA, lock out Tag Out Barricade preparation.

Berri Gas Plant, Refinery, Saudi Aramco

• Involved for the Construction, Inspection, Mechanical Completion, Hook-Up, Commissioning and Start-Up of BERRI GAS PLANT Saudi Aramco Project located in Jubail Kingdom Saudi Arabia.
• Supervise installation, testing and commissioning performed by subcontractors and verify the works are performed as per established procedure in method of statement testing procedures.
• Attend Tri-party inspection with the group of Client, QC& Operation to represent all accomplishment as per RFI-Ready for Inspection to get final approval.
• Lead and monitor cable pulling, wiring termination, loop testing, instrument installation, material take off and calibration of all process instruments including Heat Tracing system to equipment’s.
• Installation of various types of Telecom PAGA / instrument such as Pressure, level, Temperature, Pressure switches, Pressure gauge, valve including glanding, cable tray, impulse tubing, fittings.
• Creating daily progress report submits to Department manager.
• PTW, Tool Box Talk, JSA securely implemented prior to start job activity.

Tarlac Electric Cooperative Inc. TARELCO 1

• Turn around Maintenance Electrician, wiring technician for Big and Small industry.

Petromin Shell Yanbu Refinery

• Involved for the Construction, Mechanical Completion, and Hook-Up, Commissioning and Start-Up of Petromin Shell Yanbu Refinery (PEMREF) located in Yanbou Industrial City Kingdom of Saudi Arabia.
• Conducted and Perform P&ID line check, installation all instrument entire plant including calibration, loop checking, energization, sequence test, Input/output Mapping from field to marshalling cabinet Honey Well Distributed Control System records all test results for quick reference in daily reporting of progress including Heat Tracing system to all equipment’s.
• Cable pulling, wiring termination, megger test of control cable, continuity and resistance check of signal cable.
• Leak testing of in-pulse tubing to the require operating pressure.
• P&ID line check and verification of flow direction for check valve, orifice plate, valve, transmitters.
• PTW, Tool Box Talk, JSA securely implemented

• Supervise, monitor operation of all Extruder, Pelletizing machine including trouble shooting adjust and configure parameter settings, preventive maintenance and machine overhauling.
• Maintained operation of production machines, monitor any abnormalities of all Electrical / Instruments such as pneumatic, Hydraulics valves, all process instruments all I/O signals, Digital Signals.

• Perform installation, troubleshooting, and preventive maintenance different type of motor control such as Asea Brown Boveri, GE-General Electric, and Square D. Westinghouse, HVAC Control system entire plant etc.
• Responsible for the schedule of Preventive maintenance, maintenance of all motors Lighting fixture using in production line such as record temperature readings, current readings and voltage reading and other related parameters.
• Perform and locate possible problem and troubleshooting of motor control like intermittent trouble which sometimes happened during in auto operations.
• Troubleshooting Electro-Pneumatic and Electro-mechanical controls and circuits,
• Monitor machines operation such as Blow Molding, Injection Molding, Extruder Pelletizing, Atlas
Copco Compressor, Chillier and other related machinery & equipments.
• Participate daily safety talk box meeting with the department head