QA/QC Engineer
MVL Group
مجموع سنوات الخبرة :22 years, 2 أشهر
• Verify material and preservation with request and uses.
• Approve job order/project contract by the contractor
• Monitor instrument, electrical and equipment and other discipline availability and calibration.
• Monitor material preservation as per approved design and drawing.
• Verify electrical system layout & installation for approved explosive proof & hazardous area.
• Review approved design and works as per international standard and specification.
• Witness instrument and electrical installation and functional test.
• Reversed approved drawing if have site conflict.
• Record and construct safety report, focus assessment, lesson learns to avoid site failure.
• Witness and verify Cathodic and photovoltaic solar system installation and commissioning.
• Inspect and certify installed instrument on Christmas tree particular to pressure gauges etc.
• Monitoring contract scope, specification and quality plan.
• Monitor and upgrade installed substandard materials and equipment.
• Monitor and facilitate NCR and PDR status.
• Develop quality assurance and control, assessment and oversight program.
• Approving of contractor quality inspector.
• Conduct risk and other assessment.
• Monitor contractor qa and qc work and manpower qualification and structure.
• Material inspection for explosion proof, hazardous and non hazardous requirements.
• Implement of safety and standard.
• Prepares closed out and funchlist items.
Company: VELOSI Saudi Arabia Co., Limited. (March 2012 - October 2013)
P.O.Box 1208, Al-Khobar, Saudi Arabia. (Oil, Gas and Petrochemical)
Job Title: QA Inspector, NAPID/ARAMCO/OPIS/OPIU - (TPI)
Responsibilities: • Responsible for project quality assurance and standard in accordance of international standards for cathodic, electrical and instrument system and installation.
• Check contractor material estimate base on required standard and useful.
• Authorized to receive and inspect materials and procedure prior for installation.
• Client offshore representative to accept and reject contractor works as per contract, approved drawing, specification & standard.
• Review project design, manufacturer certificate and approval, work procedure & relevant document for inspection and checklist.
• Recheck electrical and instrument system loop and function prior for acceptance particular to solar system, alarm system, MOV motors, Cathodic, transformer, submersible cable installation, control panels loop test check etc.
• Assurance on effective high voltage splice, clearances by means of approved high voltage kit.
• Monitoring materials onboard with handling & preservation.
• Project decision maker for acceptance and for compliance on site.
• Maintain standard for electrical and instrument system installation and function.
• Maintain project budget and contract schedule.
• Monitoring engineering procedure and daily log book entry to Aramco system.
• Monitoring work status, progress, equipment calibration and validation, quality issue, safety issue and non-conformance.
• Implement maximum safety precaution, PPE and relevant safety training such H2S for zone classification.
• Conduct weekly and monthly audit for contract progress and work quality.
• Inspect, verify and witness receiving, installation and commissioning.
Company: Environmental Chemical Corporation International. (Oct 2010 - Jan 2012)
Camp Leatherneck, APO AE 09372, Afghanistan. (Construction, Oil & Gas)
Job Title: Project Quality Control Manager (all discipline)
Responsibilities: • Review contract agreement by client and contractor.
• Responsible for detailed estimation for civil, mechanical, electrical, communication and instrument materials by specified standard and uses.
• Responsible for contractor quality control personnel chart and qualification.
• Check project design, schedule, equipment, and operator certificate and qualification.
• Conduct preparatory inspection and other phase of inspection by documentation and project standard.
• Monitor contractor schedule and company schedule.
• Review and prepare documents materials submittals for client approval.
• Witness and document sample materials for strength and compliance test.
• Assist and update project manager for project status.
• Documentation for project package and closed out.
• Responsible for the monitoring of project safety, work on-time, within the budget and covered by international standard and specification.
• Verify punch list items, exceptional items, and those with NCR and violation items.
• Responsible for the installation and acceptance of work in all discipline.
Company: Construction Technical Services Arabia Limited. (Jan 2009 - June 2010)
P.O.Box 1083, Dammam, Saudi Arabia. (Oil, Gas & Petrochemical)
Job Title: QA Engineer/Inspector (TPI)
Responsibilities: • Responsible for project quality assurance and project design review and implementation in accordance of international standards.
• Authorized to receive and inspect materials and procedure prior for installation (Cathodic, Electrical, Instrument)
• Client offshore representative to accept and reject contractor works as per contract, approved drawing, specification & standard.
• Review project design, manufacturer certificate and approval, work procedure & relevant document for inspection and checklist.
• Responsible for detailed estimation for civil, mechanical, electrical, communication and instrument materials by specified standard and uses.
• Review and inspect high and low voltage installation requirements.
• Responsible for final witness, review and test for commissioning activities prior for my final acceptance.
• Monitoring materials onboard with handling & preservation.
• Project design review and revision in accordance with international and project needs and environment.
• Project decision maker for acceptance and for compliance on site.
• Maintain project budget and contract schedule.
• Monitoring engineering procedure and daily log book entry to Aramco system.
• Monitoring work status, progress, equipment calibration and validation, quality issue, safety issue and non-conformance.
• Implement maximum safety precaution, PPE and relevant safety training such H2S for zone classification.
• Conduct weekly and monthly audit for contract progress and work quality.
• Inspect, verify and witness receiving, installation and commissioning.
• Preparation of documents and control in relation of project mobilization and demobilization (package)
• Responsible for project quality assurance and standard in accordance of international standards for electrical and instrument system and installation.
Company: VELOSI Saudi Arabia Co., Limited. (March 2012 - October 2013)
P.O.Box 1208, Al-Khobar, Saudi Arabia. (Oil, Gas and Petrochemical)
Company: VELOSI Saudi Arabia Co., Limited. (March 2012 - October 2013)
P.O.Box 1208, Al-Khobar, Saudi Arabia. (Oil, Gas and Petrochemical)
Company: Municipality of Abha (Balladiyah) (Jan 2001 - July 2005)
P.O.Box 709, Abha, Saudi Arabia. (Commercial)
Job Title: Consultant (Electrical, Mechanical and Sanitary)
Responsibilities: • In-charge for commercial installation and building inspection for government project.
• Inspector in commercial establishment for occupancy and business permit.
• In-charge in Electrical and instrumentation division.
• In-charge for project site material estimation as per drawing and standards.
• In-charge in estimation and project implementation.
• Responsible for customer recommendation and public safety permit.
• In-charge for contractor design, budget and agenda.
• In-charge for review and approval of E & I government bidding for contractor.
• Responsible to take immediate action onsite.
• In-charge and leader for commissioning activities prior for client acceptance.
Company: RFI, Industries co., Limited. (Sept. 1996 - Dec 2000)
P.O.Box 11422, Saudi Arabia
Job Title: Maintenance In-charge
Responsibilities: • Responsible for all robotics machines install at the factory.
• Monitoring utility efficiency such brickiting, morbidelli, chiller, boiler etc.
• Responsible for order and acceptance of equipment parts.
• Responsible for factory load balancing and consumption.
• Monitoring fire pump and equipment validity and function.
• Rectify machineries and install additional emergency switch for operator protection.
• In-charge in equipment and parts audit and inventory.
• Maintain the availability of machineries and building alarms.
• Responsible for the schedule of preventive and corrective plan.
• Plant and machine commissioning.
Company: ROMAGO Incorporated. (Oct 1996 - Nov 1997)
373 Boni Ave. Mand. City, Philippines.
Job Title: Field electrical Engineer
Responsibilities: • Monitoring layout as per approved drawing and standard.
• Update and monitor daily activity and schedule.
• Monitoring manpower distribution.
• In-charge to site testing and pre-commissioning.
• Personal supervision to generator installation and testing.
• In-charge to all electrical underground layout, feeder and sub-feeder line.
• Responsible for fire alarm and equipment installation and location.
• Site estimator.
Company: VELOSI Saudi Arabia Co., Limited. (March 2012 - October 2013)
P.O.Box 1208, Al-Khobar, Saudi Arabia. (Oil, Gas and Petrochemical)
Company: Bloomingdale Builders (March 1993 - Sept 1993)
2 Galant St. Fairlane, Marikina City, Phils.
Job Title: Electrical Engineer (Contractor)
Responsibilities: • Direct supervision of electrical work.
• Estimate and material request.
• Manpower monitoring.
• Layout and installation supervision.
• Request for municipality inspector for occupancy permit.
• Prepare of documents for approval and testing.
• Project bidding
Company: J.V.Flores Electrical and Mechanical Contractor (Apr 1990 - Feb 1993)
Fairview Quezon City, Phils.
Job Title: Electrical Engineer
Responsibilities: • Supervise of electrical and fire system installation.
• Installation of elevator and escalator.
• Trouble shoots fault alarm at BMS.
• Responsible for the installation of switchgear and transformer.
• Prepare material requisition and estimate.
• Prepare project site documents.
• Monitoring schedule and project updates.
Company: Manila paper Mills Incorporated (Nov 1989 - March 1990)
Sangandaan, Novalichez City, Phils.
Job Title: Cadet Engineer
Responsibilities: • Assist designated power plant engineer.
• Responsible for plant meter reading.
• Designated for control board installation.
• Assist for turbine set-up.
• Responsible for electrical lighting and protection.
• Assist for MCC installation and functional test.
• Monitoring technician's works and schedules.
• Responsible for manpower monitoring.
• Responsible for daily housekeeping.
• Assist plant inventory.
• Assist review power plant design and operation.
Company: Manila Electric Company (March 1989 - July 1989)
1602 Ortigas Ave. Pasig M.M., Phils.
Job Title: On Job Training (OJT)
Responsibilities: • Materials, equipment and tools familiarization.
• Control logic design and layout seminar.
• Transformer design trainee.
• Electrical code and standard review.
• Motor control and switchgear familiarization and installation.
• Commercial and industrial design and layout review and seminar.
• Plant operation familiarization.
• Hazardous location protective equipment.
• Hazardous location useful articles. (Wiring method and materials)
Job Title: QA Inspector, NAPID/ARAMCO/OPIS/OPIU - (TPI)
Responsibilities: • Responsible for project quality assurance and standard in accordance of international standards for cathodic, electrical and instrument system and installation.
• Check contractor material estimate base on required standard and useful.
• Authorized to receive and inspect materials and procedure prior for installation.
• Client offshore representative to accept and reject contractor works as per contract, approved drawing, specification & standard.
• Review project design, manufacturer certificate and approval, work procedure & relevant document for inspection and checklist.
• Recheck electrical and instrument system loop and function prior for acceptance particular to solar system, alarm system, MOV motors, Cathodic, transformer, submersible cable installation, control panels loop test check etc.
• Assurance on effective high voltage splice, clearances by means of approved high voltage kit.
• Monitoring materials onboard with handling & preservation.
• Project decision maker for acceptance and for compliance on site.
• Maintain standard for electrical and instrument system installation and function.
• Maintain project budget and contract schedule.
• Monitoring engineering procedure and daily log book entry to Aramco system.
• Monitoring work status, progress, equipment calibration and validation, quality issue, safety issue and non-conformance.
• Implement maximum safety precaution, PPE and relevant safety training such H2S for zone classification.
• Conduct weekly and monthly audit for contract progress and work quality.
• Inspect, verify and witness receiving, installation and commissioning.
Company: Environmental Chemical Corporation International. (Oct 2010 - Jan 2012)
Camp Leatherneck, APO AE 09372, Afghanistan. (Construction, Oil & Gas)
Job Title: Project Quality Control Manager (all discipline)
Responsibilities: • Review contract agreement by client and contractor.
• Responsible for detailed estimation for civil, mechanical, electrical, communication and instrument materials by specified standard and uses.
• Responsible for contractor quality control personnel chart and qualification.
• Check project design, schedule, equipment, and operator certificate and qualification.
• Conduct preparatory inspection and other phase of inspection by documentation and project standard.
• Monitor contractor schedule and company schedule.
• Review and prepare documents materials submittals for client approval.
• Witness and document sample materials for strength and compliance test.
• Assist and update project manager for project status.
• Documentation for project package and closed out.
• Responsible for the monitoring of project safety, work on-time, within the budget and covered by international standard and specification.
• Verify punch list items, exceptional items, and those with NCR and violation items.
• Responsible for the installation and acceptance of work in all discipline.
Company: Construction Technical Services Arabia Limited. (Jan 2009 - June 2010)
P.O.Box 1083, Dammam, Saudi Arabia. (Oil, Gas & Petrochemical)
Job Title: QA Engineer/Inspector (TPI)
Responsibilities: • Responsible for project quality assurance and project design review and implementation in accordance of international standards.
• Authorized to receive and inspect materials and procedure prior for installation (Cathodic, Electrical, Instrument)
• Client offshore representative to accept and reject contractor works as per contract, approved drawing, specification & standard.
• Review project design, manufacturer certificate and approval, work procedure & relevant document for inspection and checklist.
• Responsible for detailed estimation for civil, mechanical, electrical, communication and instrument materials by specified standard and uses.
• Review and inspect high and low voltage installation requirements.
• Responsible for final witness, review and test for commissioning activities prior for my final acceptance.
• Monitoring materials onboard with handling & preservation.
• Project design review and revision in accordance with international and project needs and environment.
• Project decision maker for acceptance and for compliance on site.
• Maintain project budget and contract schedule.
• Monitoring engineering procedure and daily log book entry to Aramco system.
• Monitoring work status, progress, equipment calibration and validation, quality issue, safety issue and non-conformance.
• Implement maximum safety precaution, PPE and relevant safety training such H2S for zone classification.
• Conduct weekly and monthly audit for contract progress and work quality.
• Inspect, verify and witness receiving, installation and commissioning.
• Preparation of documents and control in relation of project mobilization and demobilization (package)
• Responsible for project quality assurance and standard in accordance of international standards for electrical and instrument system and installation.
Company: Hyundai Engineering & Construction Co., Limited. (Oct 2006 - Dec 2008)
P.O.Box 193, Dammam, Saudi Arabia. (Oil, Gas, Petrochemical & Power Plant)
Job Title: Sr. QA/QC Engineer/Inspector
Responsibilities: • Review client standard and specification.
• Conduct inspection base on request for inspection by construction.
• Witness testing, installation and commissioning.
• Prepare document for project package.
• Prepare mechanical package.
• Check for detailed contractor estimate for electrical, mechanical and instrument system.
• Prepare 2 weeks looks a head schedule.
Job Title: QA Inspector, NAPID/ARAMCO/OPIS/OPIU - (TPI)
Responsibilities: • Responsible for project quality assurance and standard in accordance of international standards for cathodic, electrical and instrument system and installation.
• Check contractor material estimate base on required standard and useful.
• Authorized to receive and inspect materials and procedure prior for installation.
• Client offshore representative to accept and reject contractor works as per contract, approved drawing, specification & standard.
• Review project design, manufacturer certificate and approval, work procedure & relevant document for inspection and checklist.
• Recheck electrical and instrument system loop and function prior for acceptance particular to solar system, alarm system, MOV motors, Cathodic, transformer, submersible cable installation, control panels loop test check etc.
• Assurance on effective high voltage splice, clearances by means of approved high voltage kit.
• Monitoring materials onboard with handling & preservation.
• Project decision maker for acceptance and for compliance on site.
• Maintain standard for electrical and instrument system installation and function.
• Maintain project budget and contract schedule.
• Monitoring engineering procedure and daily log book entry to Aramco system.
• Monitoring work status, progress, equipment calibration and validation, quality issue, safety issue and non-conformance.
• Implement maximum safety precaution, PPE and relevant safety training such H2S for zone classification.
• Conduct weekly and monthly audit for contract progress and work quality.
• Inspect, verify and witness receiving, installation and commissioning.
Company: Environmental Chemical Corporation International. (Oct 2010 - Jan 2012)
Camp Leatherneck, APO AE 09372, Afghanistan. (Construction, Oil & Gas)
Job Title: Project Quality Control Manager (all discipline)
Responsibilities: • Review contract agreement by client and contractor.
• Responsible for detailed estimation for civil, mechanical, electrical, communication and instrument materials by specified standard and uses.
• Responsible for contractor quality control personnel chart and qualification.
• Check project design, schedule, equipment, and operator certificate and qualification.
• Conduct preparatory inspection and other phase of inspection by documentation and project standard.
• Monitor contractor schedule and company schedule.
• Review and prepare documents materials submittals for client approval.
• Witness and document sample materials for strength and compliance test.
• Assist and update project manager for project status.
• Documentation for project package and closed out.
• Responsible for the monitoring of project safety, work on-time, within the budget and covered by international standard and specification.
• Verify punch list items, exceptional items, and those with NCR and violation items.
• Responsible for the installation and acceptance of work in all discipline.
Company: Construction Technical Services Arabia Limited. (Jan 2009 - June 2010)
P.O.Box 1083, Dammam, Saudi Arabia. (Oil, Gas & Petrochemical)
Job Title: QA Engineer/Inspector (TPI)
Responsibilities: • Responsible for project quality assurance and project design review and implementation in accordance of international standards.
• Authorized to receive and inspect materials and procedure prior for installation (Cathodic, Electrical, Instrument)
• Client offshore representative to accept and reject contractor works as per contract, approved drawing, specification & standard.
• Review project design, manufacturer certificate and approval, work procedure & relevant document for inspection and checklist.
• Responsible for detailed estimation for civil, mechanical, electrical, communication and instrument materials by specified standard and uses.
• Review and inspect high and low voltage installation requirements.
• Responsible for final witness, review and test for commissioning activities prior for my final acceptance.
• Monitoring materials onboard with handling & preservation.
• Project design review and revision in accordance with international and project needs and environment.
• Project decision maker for acceptance and for compliance on site.
• Maintain project budget and contract schedule.
• Monitoring engineering procedure and daily log book entry to Aramco system.
• Monitoring work status, progress, equipment calibration and validation, quality issue, safety issue and non-conformance.
• Implement maximum safety precaution, PPE and relevant safety training such H2S for zone classification.
• Conduct weekly and monthly audit for contract progress and work quality.
• Inspect, verify and witness receiving, installation and commissioning.
• Preparation of documents and control in relation of project mobilization and demobilization (package)
• Responsible for project quality assurance and standard in accordance of international standards for electrical and instrument system and installation.
Company: Hyundai Engineering & Construction Co., Limited. (Oct 2006 - Dec 2008)
P.O.Box 193, Dammam, Saudi Arabia. (Oil, Gas, Petrochemical & Power Plant)
Job Title: Sr. QA/QC Engineer/Inspector
Responsibilities: • Review client standard and specification.
• Conduct inspection base on request for inspection by construction.
• Witness testing, installation and commissioning.
• Prepare document for project package.
• Prepare mechanical package.
• Check for detailed contractor estimate for electrical, mechanical and instrument system.
• Prepare 2 weeks looks a head schedule.
• Witness Medium and high voltage splicing.
• Monitor Separation and segregation of cable tray installation for electrical and instrumentation (control and communication) by NEMA VE 1 & 2 procedure.
• Help and advice construction group for past and easy way of installation.
• Responsible for all quality control documents.
Company: First Kuwaiti Co., Limited. (Dec 2003 - Aug 2005)
P.O.Box 480, Kuwait, Kuwait City. (Commercial, Oil & Gas)
Job Title: Electrical Design Engineer/Inspector
Responsibilities: • Responsible for built and design contract for electrical and instrumentation.
• Design and monitor contractor installation.
• Maintain client requirements in design standards.
• Estimate materials as per approved drawing.
• Company representative for quality issues at United States Army Corps of Engineers.
• Responsible for drawing revision and modification.
• Witness functional test such as BMS, switchgear, transformer test, etc.
• Responsible for load and consumption calculation.
• Prepare electrical and instrument standard checklist, form and regulation for subcontractor.
• Suppliers authorized representation for equipment commissioning, MORRIS Crane and equipment.
• Commissioning of Electrical and instrument system prior for my final acceptance.
• Responsible for materials order, request and control.
• Prepare material transmittal and documents.
Job Title: QA Inspector, NAPID/ARAMCO/OPIS/OPIU - (TPI)
Responsibilities: • Responsible for project quality assurance and standard in accordance of international standards for cathodic, electrical and instrument system and installation.
• Check contractor material estimate base on required standard and useful.
• Authorized to receive and inspect materials and procedure prior for installation.
• Client offshore representative to accept and reject contractor works as per contract, approved drawing, specification & standard.
• Review project design, manufacturer certificate and approval, work procedure & relevant document for inspection and checklist.
• Recheck electrical and instrument system loop and function prior for acceptance particular to solar system, alarm system, MOV motors, Cathodic, transformer, submersible cable installation, control panels loop test check etc.
• Assurance on effective high voltage splice, clearances by means of approved high voltage kit.
• Monitoring materials onboard with handling & preservation.
• Project decision maker for acceptance and for compliance on site.
• Maintain standard for electrical and instrument system installation and function.
• Maintain project budget and contract schedule.
• Monitoring engineering procedure and daily log book entry to Aramco system.
• Monitoring work status, progress, equipment calibration and validation, quality issue, safety issue and non-conformance.
• Implement maximum safety precaution, PPE and relevant safety training such H2S for zone classification.
• Conduct weekly and monthly audit for contract progress and work quality.
• Inspect, verify and witness receiving, installation and commissioning.
Company: Environmental Chemical Corporation International. (Oct 2010 - Jan 2012)
Camp Leatherneck, APO AE 09372, Afghanistan. (Construction, Oil & Gas)
Job Title: Project Quality Control Manager (all discipline)
Responsibilities: • Review contract agreement by client and contractor.
• Responsible for detailed estimation for civil, mechanical, electrical, communication and instrument materials by specified standard and uses.
• Responsible for contractor quality control personnel chart and qualification.
• Check project design, schedule, equipment, and operator certificate and qualification.
• Conduct preparatory inspection and other phase of inspection by documentation and project standard.
• Monitor contractor schedule and company schedule.
• Review and prepare documents materials submittals for client approval.
• Witness and document sample materials for strength and compliance test.
• Assist and update project manager for project status.
• Documentation for project package and closed out.
• Responsible for the monitoring of project safety, work on-time, within the budget and covered by international standard and specification.
• Verify punch list items, exceptional items, and those with NCR and violation items.
• Responsible for the installation and acceptance of work in all discipline.
Company: Construction Technical Services Arabia Limited. (Jan 2009 - June 2010)
P.O.Box 1083, Dammam, Saudi Arabia. (Oil, Gas & Petrochemical)
Job Title: QA Engineer/Inspector (TPI)
Responsibilities: • Responsible for project quality assurance and project design review and implementation in accordance of international standards.
• Authorized to receive and inspect materials and procedure prior for installation (Cathodic, Electrical, Instrument)
• Client offshore representative to accept and reject contractor works as per contract, approved drawing, specification & standard.
• Review project design, manufacturer certificate and approval, work procedure & relevant document for inspection and checklist.
• Responsible for detailed estimation for civil, mechanical, electrical, communication and instrument materials by specified standard and uses.
• Review and inspect high and low voltage installation requirements.
• Responsible for final witness, review and test for commissioning activities prior for my final acceptance.
• Monitoring materials onboard with handling & preservation.
• Project design review and revision in accordance with international and project needs and environment.
• Project decision maker for acceptance and for compliance on site.
• Maintain project budget and contract schedule.
• Monitoring engineering procedure and daily log book entry to Aramco system.
• Monitoring work status, progress, equipment calibration and validation, quality issue, safety issue and non-conformance.
• Implement maximum safety precaution, PPE and relevant safety training such H2S for zone classification.
• Conduct weekly and monthly audit for contract progress and work quality.
• Inspect, verify and witness receiving, installation and commissioning.
• Preparation of documents and control in relation of project mobilization and demobilization (package)
• Responsible for project quality assurance and standard in accordance of international standards for electrical and instrument system and installation.
Company: Hyundai Engineering & Construction Co., Limited. (Oct 2006 - Dec 2008)
P.O.Box 193, Dammam, Saudi Arabia. (Oil, Gas, Petrochemical & Power Plant)
Job Title: Sr. QA/QC Engineer/Inspector
Responsibilities: • Review client standard and specification.
• Conduct inspection base on request for inspection by construction.
• Witness testing, installation and commissioning.
• Prepare document for project package.
• Prepare mechanical package.
• Check for detailed contractor estimate for electrical, mechanical and instrument system.
• Prepare 2 weeks looks a head schedule.
• Witness Medium and high voltage splicing.
• Monitor Separation and segregation of cable tray installation for electrical and instrumentation (control and communication) by NEMA VE 1 & 2 procedure.
• Help and advice construction group for past and easy way of installation.
• Responsible for all quality control documents.
Company: First Kuwaiti Co., Limited. (Dec 2003 - Aug 2005)
P.O.Box 480, Kuwait, Kuwait City. (Commercial, Oil & Gas)
Job Title: Electrical Design Engineer/Inspector
Responsibilities: • Responsible for built and design contract for electrical and instrumentation.
• Design and monitor contractor installation.
• Maintain client requirements in design standards.
• Estimate materials as per approved drawing.
• Company representative for quality issues at United States Army Corps of Engineers.
• Responsible for drawing revision and modification.
• Witness functional test such as BMS, switchgear, transformer test, etc.
• Responsible for load and consumption calculation.
• Prepare electrical and instrument standard checklist, form and regulation for subcontractor.
• Suppliers authorized representation for equipment commissioning, MORRIS Crane and equipment.
• Commissioning of Electrical and instrument system prior for my final acceptance.
• Responsible for materials order, request and control.
• Prepare material transmittal and documents.
Company: Municipality of Abha (Balladiyah) (Jan 2001 - July 2005)
P.O.Box 709, Abha, Saudi Arabia. (Commercial)
Job Title: Consultant (Electrical, Mechanical and Sanitary)
Responsibilities: • In-charge for commercial installation and building inspection for government project.
• Inspector in commercial establishment for occupancy and business permit.
• In-charge in Electrical and instrumentation division.
• In-charge for project site material estimation as per drawing and standards.
• In-charge in estimation and project implementation.
• Responsible for customer recommendation and public safety permit.
• In-charge for contractor design, budget and agenda.
• In-charge for review and approval of E & I government bidding for contractor.
• Responsible to take immediate action onsite.
• In-charge and leader for commissioning activities prior for client acceptance.
Company: RFI, Industries co., Limited. (Sept. 1996 - Dec 2000)
P.O.Box 11422, Saudi Arabia
Job Title: Maintenance In-charge
Responsibilities: • Responsible for all robotics machines install at the factory.
• Monitoring utility efficiency such brickiting, morbidelli, chiller, boiler etc.
• Responsible for order and acceptance of equipment parts.
• Responsible for factory load balancing and consumption.
• Monitoring fire pump and equipment validity and function.
• Rectify machineries and install additional emergency switch for operator protection.
• In-charge in equipment and parts audit and inventory.
• Maintain the availability of machineries and building alarms.
• Responsible for the schedule of preventive and corrective plan.
• Plant and machine commissioning.
Company: Nassar Engineering and construction (ARAMCO Project) (June 1995 - July 1996)
P.O.Box 558, Abqaiq, Saudi Arabia.
Job Title: Electrical Design Engineer
Responsibilities: • Technical group electrical designer for American housing facilities.
• Site supervision for plant repairs such power plant, GOSP and Desalination Plant.
• Review and check material quantity as per approved drawing and standards.
• Review contractor request for modification as per ARAMCO standard.
• Compilation of design approved drawing and documents.
• Responsible for the schedule of client and contractor coordination.
University: FEATI University Manila, Philippines. Course Name: Bachelor of Science in Electrical Engineering. 1990 Details: • Electrical engineering is a profession that uses science, technology, and problem-solving skills to design, construct, and maintain products, services, and information systems. • Electrical engineering is the historical name for what is now called electrical, electronics, and computer engineering. • Electrical Engineering is a high-tech field where there are development and application of modern technology such as analogue and digital circuitry, microelectronics, microprocessors and memory devices, signal processing and data communications, control and expert systems, computer network, electromagnetism and telecommunication, electric machines, power systems and electricity distribution systems.
