Wireless Engineer 2G/3G/LTE projects
Huawei Technologies
مجموع سنوات الخبرة :16 years, 3 أشهر
Commissioning, integration, and Alarm testing of the installed Huawei Node-B 3G BTS DBS-3900(RRU, BBU, UMPT card, WBBP Card, WMPT (3G) LBBP card, UBRI card(4G & LTE )
Initiate and run swap project status meeting with customer and sub cons.
Discuss the project target activities & issues with customer RF & Transmission Planning teams & close accordingly.
To provide onsite Solution for Installation of new Node-B Huawei
Get resolve the Network’s 2G & 3G KPIs issue as per customer escalations
Supervision of the installation team as per BSS (Huawei node-B & Rectifier) equipments installation.
Termination of CPRI (OFC) cables from RRU to node-B
To perform Antenna swap activity with given MDT provide by Customer.
Execution of DT & PAT of the BSS/RAN from customer on or before handover to operations.
Perform Preliminary Acceptance Test (PAT) & Final Acceptance Test (FAT) of Site.
Provide technical support to CM, RF planning & field teams to plan/execute network HW/SW changes Share the Daily progress (DPR) with customer & internal higher management regarding installation & dismantling.
Supervision of dismantling of old equipment after cut over.
Provide technical support for troubleshooting & diagnostics of Huawei Node-B & RAN network elements.
Maintain PAT & BOQ files and give updates on daily basis.
Initiate and run swap project status meeting with customer and sub con.
1st level technical support for customer queries regarding the project activities.
Discuss the project target activities & issues with customer RF & Transmission Planning teams & close accordingly.
Get resolve the Network’s KPIs issue as per customer escalations.
Provide technical support to CM, RF planning & field teams to plan/execute network HW/SW changes.
Provide technical support for troubleshooting & diagnostics of ZTE BSS & RAN network elements.
Supervision of the installation team as per BSS (ZTE SDR & Rectifier, IPS) equipments installation.
Correct Radio network faults in and performance degradations according to result of post degradation analysis report.
Commissioning, integration, and Alarm testing of the installed ZTE BTS SDR8700 (RRU based) & SDR8900 (RSU Based).
Configuration of ZTE W301 rectifier & rectifier alarms.
Provide technical support for troubleshooting & diagnostics of Siemens BSS & RAN network elements.
Provide technical support for Microwave field teams regarding installation & commissioning of NEC iPaso links as per requirements.
Execution & Management of Microwave Transmission Network (NEC iPaso 200MB, 400MB & 1000MB, SDH/PDH/ PIC, Optical Fiber) activities.
Execution of DCN connectivity &NMS activities of NEC iPaso microwave links
Commissioning and troubleshooting of ZTE BBU according to MO Data provided.
Supervision of commissioning, testing & troubleshooting of Post alarm patching of ZTE SDR & Rectifier.
Give sites readiness for cut over and maintain plan according to customer requirement.
Supervision of dismantling of old equipment after cut over.
Maintain PAT & BOQ files and give updates on daily basis.
Execution of DT & PAT of the BSS/RAN from customer on or before handover to operations.
Share the Daily progress (DPR) with customer & internal higher management regarding installation & dismantling
Installation of ALCATEL Microwave MPR-9500,
Configuration of Microwaves MPR-9500 MSS-8, MSS-4 (1+1, 2+2, Space Diversty, Aspek Links) through NEto software.
Termination of IF Cables from ODU to TRM Rack IDU.
Patching of E1 Cables, A.C, and D.C & Alarm Cables.
Testing of E1 & alarm cables using Analyser
Conducting Site survey for the deployment of new equipments
Checking of A.C & D.C power sources & Gense.
Pasting Tags, Labells and Asset tagging of related Operator.
Perform Preliminary Acceptance Test (PAT) & Final Acceptance Test (FAT) of Site.
Solving Quality related issues, checking Power related issues & civil issues of Site.
Commissioning NEC (Paso link and Paso link Neo) through Software PNMT (Paso link Network Management Terminal)Operation and Maintenance of NEC (IPaso link/Paso link Neo) and also trouble
Installation of HUAWEI DBS- 3900,
Installation of RRU HUAWEI( 1800-900MHz)
Termination of CPRI (OFC) cables from RRU to BTS
Installation of ELETEK Rectifier & Huawei BBS
Patching of E1 Cables, A.C, and D.C & Alarm Cables.
Testing of E1 & alarm cables using Analyser
Conducting Site survey for the deployment of new equipments
Checking of A.C & D.C power sources & Genset
Make Site Ready Ready for Integration (RFI) test.
O & M of Alcatel BTS A9100 (outdoor & Indoor Units)
Clear Abi sand channels of Txn issues of NEC microwave links.
Mainatainance of Genset GJ, HP, Jundier (9KVA, 11KVA, 13 KVA, 27KVA, 30 KVA)
Installation of new TRES, commbiner, sctor maping and clear the VSWR of cables.
Pasting Tags, Labells and Asset
To perform preventive Maintenance (PM) and Corrective Maintenance (CM) of all Equipments ( Microwave links, BTS & Gentset).
Perform Preliminary Acceptance Test (PAT) & Final Acceptance Test (FAT) of Site.
Solving Quality related issues, checking Power related issues & civil issues of Site.
Commissioning NEC (Paso link and Paso link Neo) through Software PNMT (Paso link Network Management Terminal)Operation and Maintenance of NEC (Pasolink/Pasolink Neo) Site survey for the Microwave & Wireless link through using of GPS.
Configuration of BTS Microwave & Wireless equipments
Perform pointing (Alignment) of R.F antenna for wireless link & Microwaves.
Coordination with different maintenance and establishment of new circuit for GSM Site.
Testing of equipment for the new and existing sites for GSM
.Deployment of DVB (VSATs) terminal and operational support Installation of 1.2M, 1.8M (Patriot Offset) 2.4& 3.7M , 4.5m.5.4m (Ruman, Summan)3.7 Prdodelin, Satellite Dish Antenna & R.F antennas for Microwave & wireless link. Installation of Modem (Comtech 625 L-band -570) BUC, OMT, Reflector, Feed Horn, LNB.
Perform Uplink & Downlink of Frequency and pointing of satellite Antenna and R.F antenna for wireless & microwaves links.
Termination of TX & Rx (IF) & Feeder Cables.
Testing Alarms by using BERT tester & Spectrum Analyzer & VSWR & DTF by using Site MASTER.
Full solution provider of SPCP.MCPC, DVBS and TDMA based V-SAT for data, VoIP, GSM & fast Internet. DSNG with PATRIOT, ADVENT, INETVIEU System for TV CHANNELS (DVB).
Digital Video Exciter 4000. MX-70 AV switcher
High Power Amplifier (HPA Controller)
Patriot 1.2, Advent, Inetviu Dish and Antenna Controller (ACU)
Tiernan, Tandberg & DVB S2 modulator. Harmonics MV-50 C & Ku Band BUC (Mitec, Upcoom, Comtech, Alga, Codan)
Customer focused for broadcasting channels.
Satellites to check there are no Spurious Carrier and Un-authorize Carrier.
Using TV Monitor, Scan all TV Channels, (analog and Digital), to check that the Video /Audio Quality is Normal.
Using CSM, Run Spectrum Measurements for all Ku- Band.
• Installation of BTS Huawei (900 &1800 MHz)
• Installation of Microwave NEC (SDH & PDH) system.
• Configuration of BTS & Microwave
• Connectivity between two end with clear line of site. Hardware installation, integration and Testing for Microwave IDU and ODU of NEC (Paso link and Paso link Neo).
Commissioning NEC (Paso link and Paso link Neo) through Software PNMT (Paso link Network Management Terminal)
Operation and Maintenance of NEC (Pasolink/Pasolink Neo) and also trouble shooting of Transmission issues.
Alarms testing on HUAWEI BSC & BTS
Supervision, Hardware installation, integration and Testing of HUAWEI BTS 3012 and 312.
Cabling in exchanges from BSC to Transmission DDF
Configuration of BTS & Microwave over the System NEC, 4E1s, 16E1s, & 32E1s 64E1
Connectivity between two end with clear line of site (LOS)
Installation Of Huawei DDF box Huawei BBS & Emerson Rectifier.
Preventive maintenance of Grounding system.
Perform Preliminary Acceptance Test (PAT) & Final Acceptance Test (FAT) of Site
Patching of E1 Cables, A.C, D.C & Alarm Cables
Testing of VSWR of Feeder cables.
To perform sweaping of NORTEL BTS.
Azimuth and Sector selection