Deputy Project Manager / Quality Manager
DEVELOPED DIMENSION INFORMATION TECHNOLOGY
Total years of experience :13 years, 4 Months
1) DEPUTY PROJECT MANAGER
JUBAIL NAVAL BASE PROJECT :
CCTV System Network Designing & Implementation:
CCTV Network designing which consists of Dome Cameras, PTZ Pole Cameras along fence, NVR’s in control room and connectivity of all the elements through Single Mode 1310 nm Fiber Optic Cable.
Coordination with camera manufacturer and Cisco for the integration of PoE Cameras and Cisco Switches on full load .
Designing of OSP/ISP system communication and electrical.
Monitoring all installation activities
Project Procurement.
Cost Estimation
Taking reports from Site Engineer for the task accomplished.
Control Room Video wall, Servers, General Surveillance Management System supervision.
Project documentation.
Overall management of project related activities.
2) Lead Project Engineer
YASREF ( YANBU ARAMCO SINOPEC REFINING COMPANY ) PROJECT :
Design and Construction of Two 60 meters Towers for TETRA RADIO NETWORK and Support Systems (Data Network System, Fire Detection & Fire Protection System, Facility Alarm System, Security Access System, Structured Cabling System, HVAC System, Electrical System )
Overall management of project related activities and issues related to multiple engineering disciplines Telecom/Electrical/Civil/Mechanical.
Maintain and ensure that the implementation of the project requirements is being followed as per YASREF standards and procedures.
Maintain and ensure that the implementation of the Project Quality Plan, ITP, and Client / Owner Project Quality requirements is being followed.
Assist the Project Manager that includes cost, scheduling & manpower distribution, raised Technical Queries .
Design Package Completion 60 %, 90 %, IFC, As Built Package.
Pre-Commissioning of all the systems involved.
Documentation supervision PR’s, NMR’s, SPDP’s .
Coordination with system vendor.
Punch items rectification.
PRB ( Project Record Books ) Completion .
Project Deliverables.
Method of Statements preparation as per the requirements.
TETRA Radio System implementation, commissioning as per clients requirement.
Assistance in getting approval from CITC (Communications and Information Technology Commission).
Ensure radio coverage as per clients’ requirements without any jamming issues in frequency and all clearance from CITC.
Conduct quality check during installation to avoid standard violations.
Raise RFI @ the QMIS, 24 hours before the actual inspection schedule.
Prepare technical submittals for materials approval when required by YASREF Projects Inspection Department (PID).
Conduct Quality Tool Box Meeting at site to educate the construction group and get them familiar to the ARAMCO standard requirements.
Prepare punch-list items during PMCC walk-through.
Monitoring of Exception Item List (EIL) and follow-up with the construction for closure.
Managing Indoor Repeaters integration with Airbus Tetra Equipment.
Supervision of SACS, SCS, Electrical, HVAC, PAGA Systems, Indoor Repeaters, Tetra Radio systems, Fire Protection and Detection System, Facility Alarm System . Integration of all installed systems with existing system of the plant.
Construction according to clients’ quality procedures.
Coordination with subcontractor for construction activities completion.
Supervising daily site activities to resolve all site issues to ensure the site readiness for the inspection.
Coordination with construction team and their lead engineer for the rectification of concern snag list and preparation for the Redline drawings.
Attending weekly Project Progress Meeting.
Following up with team for the ongoing construction activities as per two weeks look ahead schedule.
Procurement of material to be as per requirements and from approved vendor.
Developed network and ensured that all clients request and service were met for same.
ARAMCO PROJECT :
Design and Construction of Communication Link, Tower( 70 meter ) at Aramco Al-Uqair Beach and Associated Facilities including Alcatel Microwave System (MPR 9500) and Cassidian TETRA System Connectivity with Aramco Qurraya SWTP.
Coordination with GS Telekom for RF Study, drive test.
Coordination with Alcatel for path profiling, link budget, interference analysis etc .
Coordination with Cassidian for Tetra solution .
Facilitated design process 60%, 90% plus IFC package .
Tower foundation construction design and execution.
Supervising installation and commissioning of TETRA base station.
Supervising integration with MW system.
Overall project design review, procurement and execution.
Coordinated with client and determined schedule of projects.
Prepared reports on projects and provided status on a timely basis for client.
Facilitated process of permits .
Developed network and ensured that all clients request and service were met for same.
Determined capacity of network forecasted future needs and analyzed feeder route for same.
Managed and completed all tests conducted on systems.
Quality Inspections :
A) Tetra System
Site communication equipment / cabling installation as per Aramco standards .
Raising RFI’s .
Analyze the best possible solution for the coverage area of TETRA .
Feeder cable requirements on specific heights.
E1 Connection.
GPS requirement.
BOQ verification.
Cable verification.
Telecom Installations
Connection to DXT.
Antenna height and coverage verification.
Site acceptance tests.
B) Microwave System
Verification of antenna heights reflected in LOS report.
Insure Valmet connection.
Cable verification from ODU to IDU.
BOQ verification.
Fiber Connectivity with CISCO Switch.
1) ACCESS ENGINEER
ZTE Client Pakistan Telecommunication Corporation Limited (PTCL)
Telenor Pakistan
Mobilink Pakistan
Zong Pakistan
NGN Project : The project was the introduction and implementation of Next Generation Network (NGN) using PTCL Backbone. The main theme of this project is utilizing the I.P backbone and provides Voice over IP (VOIP) and more data bandwidth. The data bandwidth will be enough to provide the Video call facility for the customers. Another negligible importance is increasing the capacity with minimum number of devices.
Responsibilities : Two main projects were under my hand on Experience NGN VOIP Phase-1 & 40-K MSAG
Project Configuration and Troubleshooting of Access Gateways. PAT., Management and Maintenance
were included in my duties.
Access Portion Configuration & Maintenance:
The access portion equipment is known MSAG(Multiple Service Access Gateway)ZXMSG5200.
MSAG device supports up to 1800 user’s .These user can avail call and data facilities.
My experience includes :
Complete Configuration, Commissioning, Troubleshooting, Maintenance, VLAN’s of MSAG.
Fault handling from NMS.
Version upgradation.
Routing issues.
Site installation and expansion.
Net-Numen (31) Maintenance:
The integrated network management system provides centralized, unified network management for all ZTE NGN products including soft switch series, ZXMSG 5200 MSAG.It also provides customers with a unified management interface to other equipment vendors’ products. The Net Numen include Topology and view management, Fault management, performance management, Configuration Management, Report management, Log management, Security management.
Service Verification:
Equipment verification.
Verification of H.248 supported by MSAG.
Triple play service verification.
NMS and O&M Test.
Fax service, Narrow Band test etc.
BOQ verification.
2) RF DRIVE TEST ENGINEER
Performing drive Test using TEMS Investigation 9.0 for 2G and 3G cell sites.
Monitoring of CPICH RSCP and Ec/No of serving cell in UMTS
To verify 2G to 3G & 3G to 2G cell reselection and Handovers.
Network performance optimization using tools such as Actix Analyzer, Tems Investigation9.0 & MapInfo8.5
Conducting Data Throughput Test such as GPRS/EDGE, HSDPA, HSUPA etc.
Drive Test for New on air 2G sites to diagnosing Radio parameters.
Analysis of RF interference, Call drops, Handover failures and TCH assignment success rate etc.
Network improvement by fixing Call Drop, Rx Quality, SQI etc. and Network performance analysis. Site Auditing for existing sites to verify site database and cell design criteria's (checking Azimuths, Mechanical tilts, Electrical tilts, and panoramic views etc).
2G Frequency Scanning in idle mode for interfering frequencies in sector to sector or in serving cell to neighboring cell by using TEMS.
ARAMCO PROJECT :
Connectivity of ARAMCO Qurraya Communication building to ARAMCO Shaybah Repeater 101 through optical fiber ( 33 km
Design review, procurement and execution of project.
Route Verification, Marker Post Installation.
Facilitated process of permits and prepared work prints for final construction process.
Determined capacity of network forecasted future needs and analyzed feeder route for same.
Maintained outside plant designs and created engineering specifications for same.
Managing all the optical fiber laying.
All Outside Plant works.