Mohamed Elabbas, Head of Renewable Energy Department

Mohamed Elabbas

Head of Renewable Energy Department

Teknoconsultancy

Lieu
Soudan - Khartoum
Éducation
Baccalauréat, Electronic Engineering
Expérience
24 years, 7 Mois

Partager Mon CV

Empêcher usager


Expériences professionnelles

Total des années d'expérience :24 years, 7 Mois

Head of Renewable Energy Department à Teknoconsultancy
  • Soudan - Khartoum
  • Je travaille ici depuis janvier 2021

• Lead the establishment of the renewable energy department

• provide strategic business development plan, direction, and execution to help the company to be a Leader of Sustainable and renewable energy solution

• oversee and build cross-functional renewable energy team and resources(i.e. tools and software)

• Lead and Carry out feasibility study for commercial, industrial, agricultural irrigation solar power system and microgrids using PVSYST simulation software.

• Lead and carry out concept, detail and engineering design for PV solar system project (small, medium and large project)

• Prepare the Control system design for renewable energy for various application (parallel operation, synchronization, black start)

• Lead and Creating preliminary design packages including single line diagrams, layouts, equipment specification, performance specification, testing commissioning requirement, etc.

• Lead and Carry out engineering for solar power system before bidding stage which include calculation work for PV panel sizing, Inverter capacity, battery storage capacity, prepare scope of work for all projects size of solar power system, prepare material specification and solar system technologies selection

• Lead and Carry out tendering for EPC contractor selection work, reviewing technical documentation (EPC Contract, equipment specifications, warranties, studies, etc.) during due diligence and construction stage.

• Help in material expediting and carry out factory inspection
EPC contractor site supervisor and management from engineering work, materiel procurement, construction supervision up to testing and commissioning and project handover

Project Manager -National Club Project à TeknoConsultancy Company
  • Soudan - Khartoum
  • décembre 2017 à décembre 2020

• Lead the overall project direction, coordination, implementation, execution, control and completion on time and within the agreed budget and quality taking into account scope, time, budget, quality and safety.
• Manage team of more than 40 engineers, solving problem, enhance team spirit, direct the team toward project goals and objectives
overseeing and enhance the team performance and encourage team building

Head of MEP Department à TeknoConsultancy Company
  • Soudan - Khartoum
  • mai 2015 à novembre 2017

Fully responsible to successfully manage, execute, complete and handover multiple MEP projects related to infrastructure projects, commercial building projects, High Rise Towers, Healthcare projects
• Ensure all technical aspects of the projects are strictly complied with and in conformity with Conditions of Contract, Particular Specifications, General Specifications, and Contract Drawings & BOQ.
• Ensure that the health and safety requirements are provided and that they comply with authorities regulations
• equipment procurement assistant, expedite, factory acceptance test, shipping and storage,
project execution supervision during construction and commissioning phase
• Review and originate design solutions which comply with specifications and user requirements; safety requirements; Legislation; International standards, client standards; Codes of Practice and good engineering principles to agreed time, cost and quality
• Project management which include project planning, initiation, tendering/bidding, progress monitoring, project control up to project close out
• Well conversant with all Standards/ Codes/Statutory Regulations: IEC, ANSI, IEEE, NEMA, Electricity and Wiring Regulation, UAE Fire and Life Safety Code, ADWEA, ADDC, BS, NFPA.
Performed Load calculations, single line development, electrical equipment selection sizing and
protections, cables selection, sizing and cable routing, lighting and Illumination design, earthing and lightning protection design, fire alarm detection, telecommunication and security system design
• Coordinate the space and location of electrical equipment rooms with architect
Sizing of Emergency generator. Coordinate location of equipment with architect & client.
• Coordinate with Mechanical, Plumbing engineers for power requirements of AC units, Fan-coil units, sump-pumps. Expert in BMS and low current system design engineering and site supervision
Assignments
• SMC Khartoum, hospital (250 bed), Khartoum, Sudan
• McNimir residential building project. Khartoum, Sudan
• Grief residential building project. Khartoum, Sudan
• Kafori residential building project. Khartoum, Sudan
• National club project. Khartoum, Sudan
• Mayasem, Jeddah, Saudi Arabia

Power and Automation Engineer à Kenana Engineering and technical Services
  • Soudan - Khartoum
  • janvier 2012 à avril 2015

factory and utilities (i.e. co-generation system, distribution, protection, sizing and specification of electrical equipment)
Provide coaching, guidance and supervision work for Elect/Instrumentation project engineers team
Identification and selection of state of art technology for Elect/Instrument system and equipment
Lead Electrical Engineer for the Detail Design and procurement assistance for Redais Sugar project in sudan, Dangoti sugar Project in Nigeria. Involved in checking and approval of electrical drawings which includes Single Line Diagram, Power System Distribution, Control Schematics
Involved in checking and approval of electrical design calculations and reports, which includes power analysis simulation study, transformer sizing, Cable Sizing Calculations etc.
Integrate all the international codes and standards of safety system in the design work to protect the personnel, the environment, equipment and production.
Incorporated previous project lesson learnt in the new project design
Familiar with hazard area classification and equipment selection for different zones.
Manage and review vendor documentation, technical bid evaluation, drawings, data sheet, layout drawing, report and calculation work.
Prepare and review standard technical project specification & data sheet for electrical equipment which include but not limit to the following:
General specification for AC alternator, MV switchgear, MCC, MV/LV power cable, electrical heat tracing system, catholic protection, MV/LV induction motor, variable frequency drive, relay and power system protection, power & distribution transformer,
Conducted power system analysis simulation work for Kenana Sugar project co-generation plant (load flow, short circuit, motor starting & acceleration, protective device coordination, harmonic and transient stability analysis) study using ETAP software

Snr Project Instrumentation and Electrical Engineer, Facility Development Department (FDD) à White Nile Petroleum Operating Company (WNPOC)
  • Soudan - Khartoum
  • août 2005 à décembre 2011

Mala Satellite Project engineering, Team Leader of Elect/Instrumentation
•Prepare the scope of work of the basic & detail engineering design, technical evaluation criteria, issue tender package respond to bidder clarification
•Lead the design engineering phase of Mala Satellite project
•Review and approve design drawings, equipment specifications and ensure compliance with scope of work, international applicable codes, standards and specifications.
•Assure contractors' compliance with approved contractor quality control program and Procedures
•Manage contractor to undertake the project in compliance with all HSE and international safety standards and regulations
•Team member of Hazop study, project Team member of the project risk assessments and project integrity review
•Incorporated all the previous lesson learn from the previous projects in the design
•Inspect the installation and testing of the overhead transmission lines, HV/LV switchgear and compact substation

•Inspect the installation and testing of instrumentation and controls and ensure installation and start-up of control and instrumentation systems as per scope of work.
•Manage the installation and commissioning of the DCS (monitoring system) of Mala Satellite project
•Witness/approve equipment’s tests such as Factory and Site accepted test, Pr-commissioning, commissioning and start-up.
•Lead supervision of the design, installation and commissioning rectification work of Fire alarm system for TharJath and Mala camps
Feasibility Study of WNPOC Crude Batching via GNPOC Pipeline Project E/I team Leader
•Supervised/Lead the bidding stage of the Batching Feasibility study
•Supervised E/I work activity in WNPOC Batching Feasibility study
•Review/approve the adequacy check of the existing control/scada system
•Review/approve the specification data sheet of the new instrument required for batching operation (viscosity/densitometer, motorized valve, RTU, etc...)

Senior Instrumentation Technician à GREATER NILE PETROLEUM OPERATING COMPANY (GNPOC)
  • Soudan - Khartoum
  • novembre 1999 à juillet 2005

(5 years 9 months)
Six (6) years hand on experience in field Instrumentation and control maintenance of Oil & Gas. Job includes:

•Carried out preventive, corrective and break down maintenance activities on instrumentation and control systems in assigned field, covering Air compressor’s control, heater burner management system pumps controls, vessels, tanks, valves & wellhead controls, distributed control system (DCS), programmable logic controllers (PLC) and fire systems.
•working on pressure, temperature, level, flow and other measuring and control devices/equipment, protection devices/systems such as vibration systems, over speed and others, control/shutdown system
•Commissioning, Modification of instrument devices and equipment’s
•Trouble-shooting and maintenance for air compressor control system
•Trouble-shooting and maintenance for heater burner management system(BMS)
•Carried out Calibration work for all instrument measurement sensors
•Carried out all type of rectification work for instrumentation equipment’s and devices this includes calibration work for pressure, temperature, flow and level measurement in the field processing facility and central processing. Facility (FPF, CPF)
•Familiar with all type of instrumentation calibration equipment’s (Digital Millimeter, Hart

Éducation

Baccalauréat, Electronic Engineering
  • à Sudan University of Science and Technology Bsc
  • janvier 2004

Specialties & Skills

Instrumentation
Facility Management
Renewable Energy
Leadership and Supervisory
QUALITY CONTROL
Project Design and engineering Elec/Instrumentation
Negotiation
Decision making and Problem Solving
Project Execution
electrical and instrumentation project engineer
facility Management
Procurement
scada and control system
Commissioning
Construction Site Supervision
Maintenance Engineering
Preventive Maintenance
Maintenance Management

Profils Sociaux

Site Web Personnel
Site Web Personnel

Le lien a été supprimé pour non-respect des conditions d'utilisation. Veuillez contacter l’équipe d'assistance pour plus d'informations.

Langues

Arabe
Langue Maternelle
Anglais
Expert

Formation et Diplômes

• Advance Process Instrumentation (Process Control & Loop tuning) (Formation)
Institut de formation:
PLC
• Advance Process Instrumentation (Process Control & Loop tuning) (Formation)
Institut de formation:
PLC
• ETAP Software (Electrical Transient and Analysis Program) (Formation)
Institut de formation:
elecon instiute
• Problem Solving & Decision Making (Formation)
Institut de formation:
dubia

Loisirs

  • Reading