محمد عيسى, QC Coating Inspector

محمد عيسى

QC Coating Inspector

Daelim Saudi Arabia

البلد
الهند - تشيناي
التعليم
بكالوريوس, Computer Science
الخبرات
10 years, 7 أشهر

مشاركة سيرتي الذاتية

حظر المستخدم


الخبرة العملية

مجموع سنوات الخبرة :10 years, 7 أشهر

QC Coating Inspector في Daelim Saudi Arabia
  • المملكة العربية السعودية - الجبيل
  • أكتوبر 2014 إلى يوليو 2017

Worked as Coating Inspector

QA في ITP
  • الإمارات العربية المتحدة
  • فبراير 2017 إلى يوليو 2017

Review of Painting specifications, paint product technical data sheets, Safety data sheets, Blasting &
Painting procedure.
Materials receipt inspection, verification documentation and assurance of good storage conditions.
Carry out quality control activities including inspection, examination and testing to verify the quality of the
construction operations comply with project specifications.
Implement the preparation of Inspection and Test Plans (

Project في CHEM
  • أغسطس 2015 إلى أكتوبر 2015

Review of Painting specifications, paint product technical data sheets, Safety data sheets, Blasting &
Painting procedure.
Reviewing and analyzing the projects method statement and making sure all the personnel involved have
got the prompt knowledge about what is actually required all according to the project specification for the
assurance to reach the quality standards required.
Worked with Subcontractors to ensure a high-quality product and complete customer satisfaction.
Supervising the Ongoing Painting & Insulation activities at site and report to QC Manager.
Monitoring the Inspector's working activities at site and reporting to QC Manager.
Coordinate with Subcontractors for smooth flow of daily activities along with construction team.
Conducting Tool box meetings on Quality issues/critical issues.
Technical assistance to Inspectors.
Ensuring latest version of documents being utilized or in possession with Inspectors.
Periodic/Surprise Audits of Inspectors
Attend weekly Quality meeting, NCR / LBE Meeting with client to resolve the issues at site.
Update LBE / NCR details and coordinate with Construction & Subcontractor to take corrective action to
close the issue.
Position: QC Painting Inspector.
Client: SADARA

Project في CHEM
  • أكتوبر 2014 إلى يوليو 2014

Materials receipt inspection, verification documentation and assurance of good storage conditions.
Carry out quality control activities including inspection, examination and testing to verify the quality of the
construction operations comply with project specifications.
Implement the preparation of Inspection and Test Plans (ITP) by SUBCONTRACTORS and monitoring of
ITP's.
Daily observation of the coherence of the works with the plans and specifications of the project and the
compliance of the subcontractors with the quality requirements
Coordination with quality control intervention points on the inspection and test plans, ITP (surveillance,
witness, and mandatory inspection).
Planning, intending, receipt & verification for compliance of paint products.
Storage of paints & adherence to Manufacturer’s recommendations.
Surface Preparation: Monitoring of compressor, Blast pots, Spray-painting machines, Agitator and other
related tools.
Exposure to handling of various abrasives such as sand, Aluminum oxide / copper slag, garnet, steel grits
/ shots and water.
Surface preparation to the required profile / grading.
Shop planning for surface preparations, scheduling & monitoring of paint activities.
On-site inspection of abrasive blast cleaning, Surface profile measuring and comparing with standards as
per specification requirement
Witness applicator qualification or trade test and paint system qualification
Blotter test for compressed air contamination.
Self-adhesive tape test for blasted area dust contamination.
Record the climatic condition (relative humidity, dew point, and substrate temperature).
Testing of blast cleaned surfaces for the presence of various soluble salts and also quantitative
measurements of salt densities on the surface by various methods (Bresle Kit, SCM 400, etc).
Inspection of zinc silicate primer curing (Scratch test or MEK Rubbing test).
Control of paint film by measure wet film thickness using comb gauge.
Measurement of Dry film on ferrous and non-ferrous substrate by using electromagnetic and Eddy current
gauges respectively as per referenced standards.
Evolving operation process sheet based on quality control procedures, data sheets & ITP.
Co-ordination with QA / QC / Consultant / Client for In-process & Final Inspection.
Review of Painting specifications, paint product technical data sheets, Safety data sheets, Blasting &
Painting procedure.
Reviewing and analyzing the projects method statement and making sure all the personnel involved have
got the prompt knowledge about what is actually required all according to the project specification for the
assurance to reach the quality standards required.
Position: QA/QC Coating Inspector.

Supervisor في Blasto Metal Spray Processors
  • الهند
  • يناير 2007 إلى مارس 2011

Blasting, Painting / Coating

Repair في Velosi Saudi Arabia Co. Ltd
  • المملكة العربية السعودية
  • مايو 2011 إلى يناير 2011

Ensure adherence to project specification requirements related to Product, Personnel and Equipment
Qualifications.
Daily observation of the coherence of the works with the plans and specifications of the project and the
compliance of the subcontractors with the quality requirements
Review of inspection and test plan incorporating intervention points on ITP.
Conducting Pre Inspection Meeting on behalf of client.
Review and implement of Painting/coating procedure.
Witness for the pre-qualification test for coating application.
Ensure all Coating, Insulation, Fireproofing and Refractory materials are stored in accordance with
specifications & procedures and all waste products are disposed of safely & correctly.
Inspection of receiving bare pipe material.
Review reports for the weather condition suitable for coating as per procedure & standards.
Review of calibration certificate of Equipment used in painting/coating works.
Inspection for proper grounding of machinery prior to start work.
Inspection of Garnet/sand/grit quality used for blasting, check air compressor performance for the
required air pressure has been delivered for getting correct surface profile, air contamination by blotter
test as per ASTM D4285 - 83.
Witnessing of Abrasive contamination test for recirculated abrasive.
Inspection of surface before and after blast cleaning for surface defect such as weld spatter, sleeve,
lamination, mechanical damages, sand Oil, Grease and Debris
Pre cleaning activities before blasting (chipping and grinding of welded mark, lamination and water wash
etc.).
Inspection of surface Profile and cleanness after blasting with Elcometer gauge, surface comparator and
Testex tape as per ASTM D4417 Method C.
Witnessing and monitoring of blown clean of blasted surface prior to coating application.
Witnessing salt contamination test by using SCM 400 or Bresel kit.
Painting / Coating Materiel’s Batch #, Color code, Shade #, Product Date Sheet, MTC, MSDS reviewing
according to paint application approved by the Client. Also checking the storage condition & expiry date,
Stand time, Pot life and application type before to using.
Witnessing and monitoring of blown clean of blasted surface prior to coating application.
Witnessing and monitoring of Paint container and mixing.
Witnessing and monitoring painting / coating application and interval time between coatings.
Random inspection of WFT and DFT using appropriate measuring gauges at each stages of painting
activity such as prime coat, intermediate and topcoat as per various painting system applied on Pipe spool,
Value, Flanges, Channel, structure, support, exchanger, heater Air & Gas ducts etc.
Monitoring of Surface Temperature, Pre heat temperature, coating application temperature, Post heat
(Curing) of FBE coating, 2 Layer, 3 Layer polyethylene, Polypropylene Epoxy Coating as per project
procedure, Manufacturer data sheets.
Visual Inspection after complete Painting / Coating surface for uniform colour, gloss, free from mechanical
damage, pinholes, run, sag and blisters.
Inspection of Holiday test using low and high voltage Dry spark Holiday detectors, Wet sponge Holiday
detectors.
Witnessing and monitoring of cement lining: cement, sand & water quality by lab test reports review
(Material test certificates), proper mixing ratio of cement mortar, cement lining application, cement lining
thickness in 0, 3, 6 & 9 ‘o’ clock positions, finishing process, Slump test, cement lining quality for smooth
and holiday free application, curing process with water filling & covering of pipe & spool ends, compressive
strength test after 3 days, 7 days & 28 days curing.
Witnessing and monitoring of Concrete weight Coating: Iron Ore, Sand Particle Size Analysis and Cement
manufacture Certificates review, Visual Inspection FBE coating status, External Coating Holiday
inspection and

Supervisor في Jai Ganesh Painting Contractors
  • الهند
  • مايو 2004 إلى نوفمبر 2006

Blasting, Painting / Coating

Programmer في VB & Oracle
  • يونيو 2003 إلى أبريل 2004
QA
  • إلى
Inspector في Coating & Insulation
  • إلى

الخلفية التعليمية

بكالوريوس, Computer Science
  • في Jayamatha Engineering College
  • يناير 2003
بكالوريوس, Mechanical Engineer
  • في Techno Global University

courses: Meghalaya (Distance Education) at 2010. BGAS Certified Coating Inspector (Grade 2) Certificate Number – 52898 (Validity up to 28th Jan 2021)

Specialties & Skills

CUSTOMER RELATIONS
DOCUMENTATION
MEETING FACILITATION
PAINTING
PINTURA
QUALITY
REPORTS
SPECIFICATION