Mohamed Fazil Nawas Ali, Sr.Site Engineer-Civil

Mohamed Fazil Nawas Ali

Sr.Site Engineer-Civil

QDVC (Qatari Diar,Vinci Construction)

Location
India
Education
Diploma, Diploma in Civil Engineering
Experience
19 years, 11 Months

Share My Profile

Block User


Work Experience

Total years of experience :19 years, 11 Months

Sr.Site Engineer-Civil at QDVC (Qatari Diar,Vinci Construction)
  • Qatar - Doha
  • My current job since December 2013

QDVC is the leader of a joint-venture comprising the local Al Darwish Engineering and the Korean GS Engineering & Contracting, in association with the British Atkins as Lead Designer.Qatar Rail has awarded the southern works package of the Doha metro red line south to the consortium led by QDVC. The contract, with a value of about €1.5 billion, covers design and construction of a dual-tube underground line with a length of 13.8 kilometres Five earth pressure tunnel boring machines with an outside diameter of more than 7 metres will operate simultaneously. The contract also includes the design and construction of six underground stations, Tunnels and Two Switch Box.
NATURE OF DUTIES AND RESPONSIBILITIES:


 Active involvement in the construction of bored tunnels with EPB TBM of diameter 7m and Tunnel internal diameter 6.7m. (Monitoring for Breakthrough of TBM)
 Monitoring of TBM operating parameters viz, Cutter Head rotation Speed, Torque, Rate of advancement, Articulation, Face pressure against the predicted.
 Close monitoring of Excavated material(Quantity and strata), Primary grout volume every ring, Secondary Grout volume and pressure at every 10 rings.
 Close monitoring of surface settlements and vibrations rates on surface during Tunneling Operation.
 Construction of Tympan wall width 1.20m for station.
 Active involvement in Geotechnical works (drilling and installation of piezometer, Inclinometer, Vibrate wire piezometer and bore holes)
 Utility diversions (Sewer line 1000mmφ, Water line 300mmφ, Electric lines).
 Construction of diaphragm wall for station box and TBM shafts.
 Active involvement in all the structural works inside the station and tunnel.
 Dewatering in charge for the whole station.
 Active involvement in water proofing works at raft slab and roof slab, & different kinds of grouting works used to stop the ingress of water inside the tunnel and station.
 Project forecasting and reporting to Station Manager.
 Occupational health and safety policy implementation.
 Managing man power, time and cost at the Site level.

Sr.Site Engineer-Civil at Contrack International,OHL (JV)
  • Qatar - Doha
  • November 2011 to September 2013

Structure and Formwork of high standards in
Construction of RCC Framed Structures, multi-storeyed for Commercial, Residential. Very conversant in execution of large value Frame Work, Rebar, PT-Slab and Concrete Works, Form Works with PERI, DOKA.Well knowledge of all type Scaffolding Erection and DismantlingPre- cast Beam and Slab Erection work after casting beam. Coordination with MEP Works and associated trades for execution of RCC structure.Finishes and Fit-out Works of high standards in Marble, Granite, Corian and other tile work
False Ceiling Works (Metal, gypsum board, wood and GRC finishes)Swimming pool waterproof and other finishing works related to pool and pool deck Specialty water feature water proof and other finishes Healing garden planting works and special finishing works Special Wall Paper Coverings & Window Coverings.Stainless Steel finishes, cladding and glazed works for balustrades.Metal and glazing works related to staircases and lobbies.Supervision of Curtain Wall and Aluminium Cladding works.Block work, Plastering and Finishing Works.Gypsum wall partitionCoordination with MEP Works and associated trades for execution of RCC structure and the finishes of the various projects.Management of labour, cost control, coordination of works.Monitoring all finishing and structural activities in whole project.Dealing with sub contractors in order to ensure smooth progress of site works.Coordinating the site construction activities Preparation of Monthly/ weekly progress reports and look ahead schedules.Using work evaluation techniques in order to ensure that the project cost is kept minimum without losing quality and efficiency.Participating project review meeting for evaluating project progress.Providing technical Inputs in Construction Methodology.Organizing safety Pep talks / tool box talks to create safety awareness and practice.False ceiling in different type like Wood, Acoustic panel, Steel panel And GRG panel.Walls are mainly in Dry walls like gypsum boarding, steel boarding, led boarding, and Aluminum boarding.Including All kinds of finishing and structural works, block work, marble, stone cladding, Plastering, and false ceiling works etc.Structure and Formwork of high standards inConstruction of RCC Framed Structures, multi-storeyed for Commercial, Residential. Very conversant in execution of large value Frame Work, Rebar, PT-Slab and Concrete Works, Form Works with PERI, DOKA.Well knowledge of all type Scaffolding Erection and DismantlingPre- cast Beam and Slab Erection work after casting beam.Coordination with MEP Works and associated trades for execution of RCC structure.Finishes and Fit-out Works of high standards in Marble, Granite, Corian and other tile worksFalse Ceiling Works (Metal, gypsum board, wood and GRC finishes)Swimming poolwaterproof and other finishing works related to pool and pool deckSpecialty water feature water proof and other finishesHealing garden planting works and special finishing worksSpecial Wall Paper Coverings & Window Coverings.Stainless Steel finishes, cladding and glazed works for balustrades.Metal and glazing works related to staircases and lobbies.Supervision of Curtain Wall and Aluminium Cladding works.Block work, Plastering and Finishing Works.Gypsum wall partitionCoordination with MEP Works and associated trades for execution of RCC structure and the finishes of the various project.structural activities in whole project Dealing with sub contractors in order to ensure smooth progress of site works.Coordinating the site construction activities Preparation of Monthly/ weekly progress reports and look ahead schedulesFalse ceiling in different type like Wood, Acoustic panel, Steel panel And GRG panel.Walls are mainly in Dry walls like gypsum boarding, steel boarding, led boarding, and Aluminum boarding.Including All kinds of finishing and structural works, block work, marble, stone cladding, Plastering, and false ceiling works etc.

Site Engineer at Bongyung samsung Group
  • Saudi Arabia - Jeddah
  • October 2009 to October 2011

Structure and Formwork of high standards in


 Construction of RCC Framed Structures, multi-storeyed for Commercial, Residential. Very conversant in execution of large value Frame Work, Rebar, PT-Slab and Concrete Works, Form Works with PERI, DOKA.

 Well knowledge of all type Scaffolding Erection and Dismantling

 Pre- cast Beam and Slab Erection work after casting beam.

 Coordination with MEP Works and associated trades for execution of RCC structure.


Finishes and Fit-out Works of high standards in

 Marble, Granite, Corian and other tile works

 False Ceiling Works (Metal, gypsum board, wood and GRC finishes)

 Swimming pool waterproof and other finishing works related to pool and pool deck

 Specialty water feature water proof and other finishes

 Healing garden planting works and special finishing works

 Special Wall Paper Coverings & Window Coverings.

 Stainless Steel finishes, cladding and glazed works for balustrades.

 Metal and glazing works related to staircases and lobbies.

 Supervision of Curtain Wall and Aluminium Cladding works.

 Block work, Plastering and Finishing Works.

 Gypsum wall partition

 Coordination with MEP Works and associated trades for execution of RCC structure and the finishes of the various projects.
 Management of labour, cost control, coordination of works.

 Monitoring all finishing and structural activities in whole project. Review all shop drawing related to finishing and structural and procuring all material.

 Dealing with sub contractors in order to ensure smooth progress of site works.

 Coordinating the site construction activities Preparation of Monthly/ weekly progress reports and look ahead schedules.

 Using work evaluation techniques in order to ensure that the project cost is kept minimum without losing quality and efficiency.

 Participating project review meeting for evaluating project progress.

 Providing technical Inputs in Construction Methodology.

 Organizing safety Pep talks / tool box talks to create safety awareness and practice.

 False ceiling in different type like Wood, Acoustic panel, Steel panel And GRG panel.

 Walls are mainly in Dry walls like gypsum boarding, steel boarding, led boarding, and Aluminum boarding.

 Including All kinds of finishing and structural works, block work, marble, stone cladding, Plastering, and false ceiling works etc.

Site Engineer at ETA ASCON (ETA Star Group of Companies)
  • United Arab Emirates - Dubai
  • November 2006 to September 2009

Structure and Formwork of high standards in


 Construction of RCC Framed Structures, multi-storeyed for Commercial, Residential. Very conversant in execution of large value Frame Work, Rebar, PT-Slab and Concrete Works, Form Works with PERI, DOKA.

 Well knowledge of all type Scaffolding Erection and Dismantling

 Pre- cast Beam and Slab Erection work after casting beam.

 Coordination with MEP Works and associated trades for execution of RCC structure.


Finishes and Fit-out Works of high standards in

 Marble, Granite, Corian and other tile works

 False Ceiling Works (Metal, gypsum board, wood and GRC finishes)

 Swimming pool waterproof and other finishing works related to pool and pool deck

 Specialty water feature water proof and other finishes

 Healing garden planting works and special finishing works

 Special Wall Paper Coverings & Window Coverings.

 Stainless Steel finishes, cladding and glazed works for balustrades.

 Metal and glazing works related to staircases and lobbies.

 Supervision of Curtain Wall and Aluminium Cladding works.

 Block work, Plastering and Finishing Works.

 Gypsum wall partition

 Coordination with MEP Works and associated trades for execution of RCC structure and the finishes of the various projects.
 Management of labour, cost control, coordination of works.

 Monitoring all finishing and structural activities in whole project. Review all shop drawing related to finishing and structural and procuring all material.

 Dealing with sub contractors in order to ensure smooth progress of site works.

 Coordinating the site construction activities Preparation of Monthly/ weekly progress reports and look ahead schedules.

 Using work evaluation techniques in order to ensure that the project cost is kept minimum without losing quality and efficiency.

 Participating project review meeting for evaluating project progress.

 Providing technical Inputs in Construction Methodology.

 Organizing safety Pep talks / tool box talks to create safety awareness and practice.

 False ceiling in different type like Wood, Acoustic panel, Steel panel And GRG panel.

 Walls are mainly in Dry walls like gypsum boarding, steel boarding, led boarding, and Aluminum boarding.

 Including All kinds of finishing and structural works, block work, marble, stone cladding, Plastering, and false ceiling works etc.

Assistant Engineer at East Coast Construction and Limited (ECCI)
  • India - Chennai
  • April 2004 to October 2006

 Execution of civil construction activities.

 Execution of Heavy equipment foundation,

 Execution of all types of Structural work.

 coordination of works & measuring works &building

 Management of Labour, cost control,

 Planning and Programming
 Quality control and reports making
 Setting Out and Grid Marking
 Planning of material Procurement
 Preparation of Bar bending Schedule as per Drawings
 Daily Manpower Programming and Allocation
 Preparation of Materials Take off
 Safety and Quality

Education

Diploma, Diploma in Civil Engineering
  • at Mohamed Sathak Polytechnic Collage
  • April 2004

Specialties & Skills

Engineering
Civil Engineering
General Construction
QA QC Engineering
Computer Skills : AUTO CAD (Subject: 2D Drawing, 3D Modeling)
autocad,

Languages

English
Intermediate
Hindi
Expert
Tamil
Expert
Malayalam
Beginner

Hobbies

  • reading islamic books and playing tennis,swimming,browsing internet