Mohamed Tariq Aziz A

Expériences professionnelles

Total des années d'expérience :10 years, 1 Mois

Site Engineer (Pipeline) à CORRTECH International Pvt. Ltd.

Inde - Ahmedabad
Je travaille ici depuis mai 2015

 Arrangement for Casing pipe welding and painting of Road crossing locations and Holiday testing after painting.
 Stringing of pipe lines in accordance with the Right-of-way.
 Installation and verification of end seal arrangement for casing to carrier pipe.
 Knowledge in Flange connections including Pig launcher, Pig Receiver and corrosion assessment.
 Lowering of Casing pipe assembly at Road cross areas.
 Pipeline construction for Steam, Process and Water pipelines in the off plot piping as per ASME requirements.
 Supervision of Fabrication and Construction of Pipelines and hydro testing
 Supervision of Fabrication, testing and clearance of Pipe Spools for FBE Coating for water Supply and Relocation lines
 Preparation and Hydro testing of process pipe lines as per ASME B31.3
 Monitoring & laying activities of AGI Station (Above Ground Installation)
 Review of Method statements and other Work procedures for client approval.
 Review of Pipeline alignment sheets and for arranging separate plan for road crossing areas

Completed Projects

1. Client : PJSC/ Reliance
Project: Spur Pipelines Bharuch (30” O.D x 1.8 KM, API 5L-Gr. X52)
Welding, Laying, Testing, Metering/Heating Skid and Boundary wall construction
2. Client : L&T Limited/ Cairn India Pty Limited
Project: Pipeline for Well pad and Mangala process Terminal of Cairn’s Barmer Terminal
(10-25” O.D x 10.4 KM, API 5L-Gr. B)
Laying and testing of steel pipeline for Mangala process Terminal of Cairn’s Barmer Terminal project including road crossing.
3. Client : Gujarat State Petronet Limited
Project: Tana-Amreli Pipeline Project
Pipe Specifications: - (12” O.D x 6.4 KM, API 5L-Gr. X46)
Laying and testing of steel pipeline and associated work from Sector 21 to Sector 24.

QA/QC Supervisor à JTI International, Inc.

Inde - Ahmedabad
novembre 2015 à mai 2016

 To witness Hydrostatic and Pneumatic testing of pipelines. Monitoring all pipeline project activities.
 Coordinate all site inspections with the site subcontractors.
 Coordinate with the site subcontractors to ensure that communication exist and are maintained
 Assist the site subcontractors in the resolution of drawing interpretation
 Completion of QC site instructions and coordinate their closure review of inspection test packages during the course of construction/laying activities.
 Carryout inspection and checking for all quality related procedures in the site and ensures activity at the site is as per approved method statement and inspection test plan.
 Report to the QA/QC Manager, control and monitor all activities related to Quality Management System, QMS. Attend the weekly QC meetings.
 Taking care of QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered and other QA/QC documents.
 Compliance with the site's Health, Safety and Environment regulations.
 Develop method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project
 Carry out Internal Audit at the site as scheduled in the Project Quality Plan, PQP.

Worked Projects
1. Worked as a QA/QC Engineer in South Gujarat Gas Pipe Line Project. (Pipe Grade:16” Dia X 29, 000mts API 5L X 65).
2. Worked as a QA/QC supervisor in Kalol-Santej Gas Pipe Line Project. (Pipe Grade:16”X 14, 000mts API 5L Gr.B).

Maintenance engineer à ITC Limited

Inde - Kolkata
mai 2014 à novembre 2015

 Failure Mode and Effects Analysis(FMEA) has been done for reduction of vibration in drives system and accrued a benefit of 63% reduction in overall vibration during a span of 5 months
 Root cause Failure Analysis (RCFA) has been done with more detailing, execution of trivial action plans are completed within a week’ duration hence reducing the repetitive nature of the failure
 Shutdown planner for annual maintenance of the machine
 100% PMS adherence, so that rationalizing the failures due to lack of PMS
 Working in an ISI Green Belt Project in Cp, Cpk Improvement of Profile variation in Camber rolls under the guidance of Mr.Mondal, Pathik Kr., Technical Officer (SQC) faculty from Indian Statistical Institute (Kolkata).
 Reduced the Alarm condition of the equipment by enforcing exhaustive predictive maintenance tool (Condition Monitoring system)
 Team leader of a TPM JishuHozen functional unit.
 Completed Six Sigma project on Revenue & Maintenance cost reduction and Inventory Control under DMAIC methodology.

Éducation

Baccalauréat, Mechanical Engineer

à College of Engineering, Guindy
mai 2014

Mechanical Engineer graduated from one of the most prestigious universities in the country and managed to be qualified in FIRST CLASS with an overall aggregate of 7.28/10 Projects carried out • Study on Wind Energy Efficiency Researched on Improvement of Wind energy efficiency and effectiveness and succeeded in developing a prototype model of its kind. • Study on Low Cost Manual powered washing machine Implemented a Project in Low cost Manual powered washing machine so as to cope up with the government's campaign of Energy Conservation across the state.