HSE Engineer
UCC
Total years of experience :18 years, 0 Months
Preparing of safety induction training, tool box talk and safety meeting
Training as Per Training Matrix and as per project requirement.
Administrate safety orientation.
Build safety culture among workers assigned to task.
To support site safety audit, inspection, gas detector management.
To support inspection of safety equipment (i, e wind socks, safety shower, breathing air sets SCBA, EEBDS .
Permit to work Monitoring
Work At Height, Manual Handling, Defensive Driving, Heat Stress, Confined Space, lifting, Tools Handling, Etc.
Seminar orientation of new employees.
Conduct Third party training.
Conduct ASAT training.
Conduct Rendition.
Conduct Internal Trainings As per Matrix
Conduct safety exercises, musters and drills.
All emergency safety procedures.
Using/handling maintenance/inspection of all first aid fire fighting extinguishers.
Monitoring environmental protection and waste management, maintain good housekeeping.
Training all subordinates in their day-to-day activities.
As Per Safety Manual, Hazards are identified and recognized industrial practices with Team Support.
Plan and conduct Internal HSE training programs, initiate drive to promote HSE awareness and performance
Prepare All Training Matrix and Induction, ASAT, Internal, Third party.
Prepare training Weekly and Monthly report
Prepare Daily ASAT report and send to HIA.
Till date 30000 people Inducted.
Prepare Internal training report.
Prepared and maintained all the Necessary Documents and Records.
Maintain Side Activity Day diary sheet
Handling and issuing various Internal Permits and maintaining the permit log by updating it on Time.
Coordinating and communicating with HIA FM and ensuring safe working practices being
followed by the working party.
Ensuring the requirements mentioned in the permits are adequately met prior to issuance of
permits.
Ensuring the existing utilities / services are adequately marked or exposed prior to duty
Commencement.
Coordinating with the technical department as well as the survey department and
ensuring the drawings on existing utilities / services are up to date prior to issuance of the
Respective permit.
Prepare & Imp; review Risk Assessment for each major task in accordance with scope of works.
Attending and participating in safety training programs illustrating a personal commitment to
safety
Conduct random on-site safety inspections and report any violations
Ensuring that workers are properly trained
Safety plans, ensuring that applicable safety and health standards were implemented into such
plans.
Coordinated with construction managers to identify and resolve various safety issues.
Confirmed that risk controls were implemented for all construction projects.
Update implemented safety program procedures for each site.
Preparing of safety induction training, tool box talk and safety meeting
Training as Per Training Matrix and as per project requirement.
Administrate safety orientation.
Build safety culture among workers assigned to task.
To support site safety audit, inspection, gas detector management.
To support inspection of safety equipment (i, e wind socks, safety shower, breathing air sets SCBA, EEBDS .
Permit to work Monitoring
Work At Height, Manual Handling, Defensive Driving, Heat Stress, Confined Space, lifting, Tools Handling, Etc.
Seminar orientation of new employees.
Conduct Third party training.
Conduct ASAT training.
Conduct Rendition.
Conduct Internal Trainings As per Matrix
Conduct safety exercises, musters and drills.
All emergency safety procedures.
Using/handling maintenance/inspection of all first aid fire fighting extinguishers.
Monitoring environmental protection and waste management, maintain good housekeeping.
Training all subordinates in their day-to-day activities.
As Per Safety Manual, Hazards are identified and recognized industrial practices with Team Support.
Plan and conduct Internal HSE training programs, initiate drive to promote HSE awareness and performance
Prepare All Training Matrix and Induction, ASAT, Internal, Third party.
Prepare training Weekly and Monthly report
Prepare Daily ASAT report and send to HIA.
Till date 30000 people Inducted.
Prepare Internal training report.
Prepared and maintained all the Necessary Documents and Records.
Maintain Side Activity Day diary sheet
Handling and issuing various Internal Permits and maintaining the permit log by updating it on Time.
Coordinating and communicating with HIA FM and ensuring safe working practices being
followed by the working party.
Ensuring the requirements mentioned in the permits are adequately met prior to issuance of
permits.
Ensuring the existing utilities / services are adequately marked or exposed prior to duty
Commencement.
Coordinating with the technical department as well as the survey department and
ensuring the drawings on existing utilities / services are up to date prior to issuance of the
Respective permit.
Prepare & Imp; review Risk Assessment for each major task in accordance with scope of works.
Attending and participating in safety training programs illustrating a personal commitment to
safety
Conduct random on-site safety inspections and report any violations
Ensuring that workers are properly trained
Safety plans, ensuring that applicable safety and health standards were implemented into such
plans.
Coordinated with construction managers to identify and resolve various safety issues.
Confirmed that risk controls were implemented for all construction projects.
Update implemented safety program procedures for each site.
Follow the Kharama and Qatar Petroleum safety rules.
Use A and B type work permit in 400kv Lines.
Follow The Access to limit permit
Preparing of safety induction training, tool box talk and safety meeting.
Seminar orientation of new employees.
Before work check Isolate and earth.
Follows Flag and wrist watch code.
Work at height working procedure.
Maintain goal post in regular traffic Area.
Monitor And Inspection Troubleshoots and repairs overhead and underground distribution systems, including transformers, circuit interrupters, recloses, capacitors, voltage regulators, medium voltage switches, utility poles, and supporting hardware as per safety Norms
D Inspection Monitor Replaces and installs medium voltage overhead and underground electrical circuits and terminations As per safety Norms.
Monitor and inspection Install Control Panel, Substation, Cables, Transformer as per safety Norms.
Use Man Basket crane.
Carry out risk and assessments all activities under OHSAS 18001 & ISO Standards.
Identify related hazard and preventing measures as per safety procedures.
Conduct safety exercises, musters and drills.
All emergency safety procedures.
Contributed effectively for accomplishment of the district’s safety goals, objectives and activities.
Recognize all the hazards due to different work activities.
Scaffolding safe procedure, avoid falls from heights.
Enforce a “No Smoking” policy throughout the duration of the project.
Standard occupational hazards, including accident analysis and prevention techniques.
Tips for an effective safety health committee.
Using/handling maintenance/inspection of all first aid firefighting extinguishers.
Monitoring environmental protection and waste management, maintain good housekeeping.
Inspection of workplace before starting of every work.
Inspection of all tools, electrical equipment.
Take disciplinary action to safety violators who expose unnecessary themselves or other personal.
First aid training.
Conducts regular fire-fighting training programs and firefighting drills.
• Disseminate and Communicate Policy, HSE Management System requirements to site personnel.
• Provide necessary advice, information and support in the effective implementation of the HSE Management System requirements and this HSE plan.
• Plan and conduct Internal HSE training programs, initiate drive to promote HSE awareness and performance
• Creating HSE awareness through PEP talks. - Every day
• Advising line management in preparing HSE Risk Assessment for the new activities.
• Conduct investigation of all incidents / dangerous occurrences & recommend appropriate corrective measures. - When reported
• Monitoring administration of First Aid
• Maintain all HSE related documents. Update HSE training records - Continues
B- TURNAROUND PROJECT: - SADAF (EBS1) SABIC, KSA
PETROKEMYA (PVC/VCM) SABIC, KSA
To perform shutdown activities of Vessels, Columns, Heat Exchangers, Tank Etc.
Responsibilities:
Approval of Various procedure from Clients includes- Vessel Entry Procedure, Hot Work - Fabrication Procedure, Lifting Procedure, Emergency Response Procedure, lock Out-Tag Out Procedure, Various Pipelines Tie In Procedure, Commissioning Procedure. Implementing safe operating procedures, plans and different type of work permit systems.
Advice & co-ordinate for implementation of Work Permit Systems.
Conduct safety rounds to ensure that proper rule, regulations and code of practices are being followed by the workforces.
Monitoring the performance of Safety Team Members and extends guidance as necessary in carrying out their assigned functional duties and responsibilities.
Attend JSA Meeting for activity to be planned and Giving Guidance/ suggestions on HSE matters.
Attend Tool box talk as a client representative and assist necessary support for completion of safe PROJECT.
Safety audit for Hazard Hunt, Evaluating & assessing the future hazards controls.
Report accidents/ incidents & near miss during shutdown activity.
Conduct Safety inspection and Permit to Work audits of worksites & taking corrective actions for the deviations noticed.
Advising line management in preparing HSE Risk Assessment for the new activities.
Facilitate screening of workmen and conduct HSE induction.
Periodic inspection of equipment.
Conduct safety exercises, musters and drills.
All emergency safety procedures.
Contributed effectively for accomplishment of the district’s safety goals, objectives and activities.
Recognize all the hazards due to different work activities.
Scaffolding safe procedure, avoid falls from heights.
Standard occupational hazards, including accident analysis and prevention techniques.
Tips for an effective safety health committee.
Using/handling maintenance/inspection of all first aid firefighting extinguishers.
Preparing of safety induction training, tool box talk and safety meeting. Seminar orientation of new employees.
Implement safe working procedure Carryout weekly Work permit audit.
Safety preparation during Turn around.
v Develop and maintain hygiene programs for noise, atmospheric monitoring and ventilation systems.
v Develop emergency control system.
v Responsible for waste management and house-keeping and conduct audit in on monthly basis.
v Daily or weekly tool box meeting
v Issue Safety site entry procedure
v Monthly inspection for fire extinguishers
v Daily inspection for workshop area provide
v Weekly or monthly HSE report
v Regular visit to work site and carryout regular inspection
v Maintain and producing health safety environmental statistics
v Inspection of scaffolding and fire related equipment
v Preparing safe working environment
Daily inspection for workshop area provide
Preparing HSE plans & procedure, Inspection, Audit and Training Schedule of Project.
Revision, up gradation and development of control standards for management of HSE issues, according to the local HSE legislation.
Preparing and submitting HSE statistics report required by company management.
Responsible for keeping people free from danger, risk, or injury in the workplace.
Assist with other risk management and environmental issues.
Organize and coordinate monthly drills for staff on fire safety and first aid.
Implementing risk reduction measures by preserving orders and enforcing regulations and directives from the enterprise
Investigating industrial accidents, injuries, or occupational diseases to determine causes and preventive measures.
Inspecting facilities, machinery, and safety equipment in order to identify and correct potential hazards, and to ensure safety regulation compliance.
Reviewing or reporting findings from accident investigations, facilities inspections, or environmental testing.
Reviewing employee safety programs to determine their adequacy and give induction to the employees.
Major Achievements:
Solved every HSE matter on site during construction & drilling operations to achieve the targets of 0 LTI, through Safe Work Practices, Proper Waste Disposal & Environmental Damages Prevention by promoting and developing HSE Culture & Awareness through incentive schemes, Proper Risk Assessment, & Implementations of Permit to Work System, Critical Activities on Hazardous Locations, PPE, Safe Storage and handling of chemicals, Standards, Procedures & HSE legislation & Plan.
in
-